Ford Explorer Police Interceptor horn does not work fix.
Vložit
- čas přidán 26. 08. 2024
- If your Horn does not work on your Ford Explorer Police Interceptor then watch this video.
*Hope this video helps you save some money on your vehicle.
If the video was helpful, remember to give it a "thumbs up" and consider subscribing.
* Sorry for the filming quality.
Please like and subscribe for more Interceptor how to videos.
* This video is for Entertainment purposes only, we are not responsible for any injuries or damages any video may cause to you or your vehicle. Please consider using all safety gear and precautions.
Disclaimer:
Due to factors beyond the control of Next Car Recon, I cannot guarantee against improper use or unauthorized modifications of this information. Next Car Recon assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Next Car Recon recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Next Car Recon, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Next Car Recon. This video or information may not fix your car problem and Next Car Recon is not responsible.
7 months with my PIU and no horn and finally you got me the answer, it was all this time the green wires ! Thank you so much !
You welcome. Thanks for watching
I bought a 2017 Ford Explorer Police Interceptor that was converted for civilian use with only 9,300 miles on it. For reasons unknown, someone cut those exact same two green wires and tried to use them for DC power outlets in the center console... and the horn itself was disconnected and missing the wiring harness. I exhausted all the google searches and even a few former police department mechanics who were stumped. Because of your video, I was able to identify which of the wires under the hood were for the horn, and find the two random green wires under the dash to reconnect. I don't know where you found the information to figure that out, but you saved me A LOT of time and money. So thank you for your channel. It's people like you who make DIY mechanics possible.
You are very welcome. Glad I was able to help.
Green wired fixed my horn! Thanks.
You welcome. Thanks for watching
I have 3 with this issue. Thanks for the video 👌
You welcome. Glad I was able to help.
Thanks for this advice! It’s was the green wires!! Much appreciated bro..
You welcome. Glad I was able to help.
Thank you, my horn was still connected but the green wire was cut and wired into and toggle switch on the lower right dash. I haven't looked yet to see what they used the switch for maybe tone change. I just got the horn working and wanted to say thank you. Separate issue on mine the high beams would not work. 1 wire on each high beam was cut and spiced into something else. Simple fix reconnect the wire behind each headlight. Thanks again
You welcome.
Thanks! Thankfully it was just the green wire for me
Glad I could help. Thanks for watching.
Remove the panel under the steering wheel. You will see shinney electrical wire on a bundle of wires. That does not look factory. Remove the electrical tape i found a plug disconnected. Plugged them together and horn worked. Mine was a 2017
Green wire below steering wheel,splice back together
Glad I was able to help.thanks for watching
I appreciate you my good sir
Your welcome.
@@carsmartautomotiveinterceptors I just finished greatly appreciate it and please make more videos like this especially for the 2016 Ford utility
Good stuff! Glad everything worked out. Definitely making more videos as we have more explorers in transit.
Luckily for my 2015 PIU I only had to reconnect the purple wire behind the center console.
with my car i had a simmalar issue, but after i took a look under the wheel there was no wires to be found, so i had to do some more digging. after that i found the purple green wire to be located under the sterio next to the usb port.
Glad to hear. Thanks for watching.
What year was your vehicle?
yes the ford sedan wiring is a different colour and loacation than the explorer utility.
Good looking out
You welcome.
It's important to stress if you have a police explorer interceptor that your spliced line could be anywhere in about three different places. You will need to look in all of them. if you do not see a green wire spliced or jumped under the dash where this video indicates it should be, pull apart the lower center dash panel and look for the cut purple and green wire that the videos for the Taurus Interceptor sedan often talk about. As you know, these two cars are very similar to each other . I did not find a cut green wire under my center dash and I did not find a spliced wire up by the horns in front so I took apart the center column an instantly saw the cut purple wire that the Taurus interceptor videos advised me to look for.
Do you know how to override the lift gate lock ?
Did you have any issues with the hazards lights not working? I push the button and it does nothing, all other lights work normal
No issues. Does your turn signal lights work? If they don't work it may be a spliced wire. If the do work check your hazard switch and make sure it's connected properly.
So which wires were the issue? Was it rewired in the interceptor package?
That’s because of the emergency equipment, and this different siring tones
Always check for your ground.Wires as on your horn, cause it's a 100%.It's always that it's never rloose.Some good as headquarters we'll just hit and work in all cars.I love working on cars.I'll laugh at this.Low working on cars