First of All it's really amazing Guys, you have done a great Job. So my queries are Listed below 1. How much it cost to built the coustom exhaust 2. After coustamization of exhaust how much Milege does the bike gives and Top speed. 3. Can you built me the same coustom Exhaust .
This is just a modified stock exhaust. Custom exhausts are already available in market, good quality can cost you approx 10k above. We are getting decent mileage. Same Exhaust can be built if you wish👍
Bro x pulse engine can we ruff use it as soon as we buy . Can we ride in beach sand because in sand it will be tough for the bike to move so that we have to give more power the engine could go off soon. Iam following your videos 😁 for longer time give your suggestion 😉.
Since my friend wanted a subtle yet enjoyable tone we went with this. It is possible to make it loud or change the tone entirely. He was needing something with zero annoyance.
Started with rough experimentation. Then backed it with some basic reasoning and calculation.😋 I'm glad that you understood the entire build. Loads of love and thanks❤️
Amazing Modification But is there any way to make the rear end of exhaust look attractive? Like by just cutting the upper piper at an angle and making it parallel to surface? or does doing so ruins the sound quality?
If you cut the pipe parallel to the surface you'll have a U shaped opening facing the sky. You'll have issues with water entry during rains or water wading. If you shorten the pipe such that it stays well inside the end cap(appearance). You'll have too much stray noises.
Can you make brackets that can fit 7 inch headlight. XPULSE size is 6 inch and I can’t extend the existing brackets. Please make a video on headlight modification by upgrading the headlight size .
@@Niraj4299 there are 6in and 7in LED retrofits in market. You can opt for one. Added stock bracket is cast aluminium. There are steel brackets in market to support the upgrade. Do check out online or your local market
@@jismonambrose8926 Port 1: 1.2in Dia, 16g thick, 8 in length Port 2: 1in Dia, 16g thick, 4~7in length (remember shorter the pipe less deep bass. Ie. Round will be raspy.) sure bro will add it in the description ❤️
You are petty excellent in knowledge man. Seems technically sound 👌
Good stuff man! Great video.
Better sound than aftermarket exhausts 💯💯💯💯
That was awesome guys💯❣️😁love your idea and video 🤨and now from this inspiration I'm also going to modify my xpulse exhaust just liket this one. 🤪🔥🔥🔥🔥
Sounds dope bro!
Woh good engineering keep it up ❤️
Can I remove chamber 3 and weld 1.2inch pipe and make it free flow, ?
Hi where could I study about the making of the exhaust pipes?
Bro can we remove only db killer on xpulse? If yes how to do it. I do not want to take out cat con because of emission. Please reply.
First of All it's really amazing Guys, you have done a great Job. So my queries are Listed below
1. How much it cost to built the coustom exhaust
2. After coustamization of exhaust how much Milege does the bike gives and Top speed.
3. Can you built me the same coustom Exhaust .
This is just a modified stock exhaust.
Custom exhausts are already available in market, good quality can cost you approx 10k above.
We are getting decent mileage.
Same Exhaust can be built if you wish👍
@manoj can you manage to extra the exact figures in terms of milage and Power will do wonders 🙏
Will it help me to use a kn&n filter?
How can i make fz16 exhaust similarly bassy?
Hi bro, where did you source that handlebar from?
Amazing bro
❤️Thanks for your positive words❤️
Can you guys do the same mode on my bike?
Bro ...is gear oil or lubricant better to lube chain ...pls reply bro
make videos on how to improve headlight and excessive engine heating problem on xpulse 200
make a video on ff exhaust,ff filter and jetting
My bike is carborator vertion xpulse.engin heating issue i think exhaust issue
Bro which handle bar are you using, and what can be done to bs6 exhaust which has got extra catcon
Handlebar instagram.com/p/B8TIsL9g2SU/?igshid=1ppyjysh2coqk
Hi! Have you carried out mods on the BS6 exhaust yet?
Same can be done👍
How much does it cost you for complet modification
Handle bar link please
I simply removed the exit pipe (baffle) and it sounds much more bassy.
I hope i wont have any negative impact on the engine
did that cancelled the warranty?
is this the science behind dominar's sweet sounding exhaust note?? Dual Port?
Bs4 or bs6
bro how to service fi xpulse ... is it good to keep it stock or is it okay if i do performance mods
Keep it stock, cuz I personally feel Xpulse engine won't last long with too much performance mods
I need to increase Wind shield height In my x pluse
You can make one with acrylic sheets preferably 4mm ones
Bro x pulse engine can we ruff use it as soon as we buy . Can we ride in beach sand because in sand it will be tough for the bike to move so that we have to give more power the engine could go off soon. Iam following your videos 😁 for longer time give your suggestion 😉.
Everybike needs run in. Atleast ride it sedately till first service. Then you can rev it hard👍
I guess u need to work or experiment on sound note.. it sounds little den normal sound.
Since my friend wanted a subtle yet enjoyable tone we went with this. It is possible to make it loud or change the tone entirely. He was needing something with zero annoyance.
Very impressive detailed explanation. How come you have such in depth knowledge of exhaust performance and sound characteristics?
Started with rough experimentation. Then backed it with some basic reasoning and calculation.😋
I'm glad that you understood the entire build.
Loads of love and thanks❤️
@@ManojOrbit That's great. Looking forward to more.
Amazing sound bro....
Can we do same for ktm duke 390 ???
Yes
Is it not better to install a KTM 390 exhaust?
You have to ask someone who did it.. cheers
Bro Pondi Vanthaa Fit Panikalama Contact Solunga bro
Yes, ping me at Instagram @manoj_mjorbit
i think you're an engineer.
Yes ❤️
Tell about yur fish tank bro
It's a 30x30cms planted cube with a full moon blue and red betta fish
Is there any milage shortage ?
No
Amazing Modification But is there any way to make the rear end of exhaust look attractive? Like by just cutting the upper piper at an angle and making it parallel to surface? or does doing so ruins the sound quality?
If you cut the pipe parallel to the surface you'll have a U shaped opening facing the sky.
You'll have issues with water entry during rains or water wading.
If you shorten the pipe such that it stays well inside the end cap(appearance). You'll have too much stray noises.
Can you make brackets that can fit 7 inch headlight. XPULSE size is 6 inch and I can’t extend the existing brackets.
Please make a video on headlight modification by upgrading the headlight size .
@@Niraj4299 there are 6in and 7in LED retrofits in market. You can opt for one.
Added stock bracket is cast aluminium. There are steel brackets in market to support the upgrade.
Do check out online or your local market
Any doubts regarding motorcycle a? @manoj_mjorbit
Yes
@@jaf_007 aux lamp ku ethavathu permission iruka.. Ethavathu guide lines iruka.. Ila bikes la aux lamps e use pana kuda tha soluga
Noted will answer in the video
Don't feel bad bro i don't like this tune i want that base dug dug dug sound bro
Hi bro
Tamil
Milage adi vaangaathaah bro 🙄
Vangathu bro
No bro, we are not using a full free flow exhaust. We still have a decent amount of backpressure. So expect good sound and performance gains.
@@ManojOrbit
Bro can u give the size of pipe and legth by text as replay..
@@jismonambrose8926
Port 1: 1.2in Dia, 16g thick, 8 in length
Port 2: 1in Dia, 16g thick, 4~7in length (remember shorter the pipe less deep bass. Ie. Round will be raspy.)
sure bro will add it in the description ❤️
@@ManojOrbit thanks✌️😍
LoL
ROFL
Laura
just buy a exhaust
Cops may trouble you on aftermarket parts