Secret Profile Pipe! WHY DO WELDERS NOT SPEAK ABOUT IT!
Vložit
- čas přidán 19. 03. 2020
- A very useful idea for every man! To the garage or workshop !!
Friends, my name is Sergey! I am the author of the channel HandiCrafts.
On this channel I present everything that I have done with my own hands.
Creative ideas, useful tips !
We turn simple things into unique ones! Subscribe, it will be interesting! #craft #wood #diy - Věda a technologie
Fantastic ! Since watching this video I always cut my tube too short so that I can join it back again like a professional...
4 mins of my life I'll never get back.
Welders don’t tell you about that because they usually don’t plan on separating the material after they weld it Im guessing?
Very useful 👍
How about to use smaller pipe and drill few holes in big pipe and weld it?
Very nice brother. ....
Well this is very useful for people that do not know or have welfing equipment.
Thank you.
Gracias por compartir, saludos!
Hi! Sir Sergey your channel was great for all fabricators such as wonderful idea.
Just get some smaller tubing instead...way cleaner...
Waaoooo súper genial..
gute Arbeit und danke für tolles Video 😎👏
You draw a straight line mark on the street line corner.
Omg. What a talent. 👏👏👏👏
Its useless 🤣🤣🤣
i like your Smile and your idea show
Franchement bravo et mille merciiiiii
If you charged by the hour and the customer found out you were wasting their money doing this you would have no more business
Probably more of a handyman project, of course a fab shop wouldn't do this.
I feel like this would be used for welding pipes together. You could use his solution in case you didn't have access and were doing something DIY at home...
*SERGEY, esos guantes rotos con ese nudillo o dedo quemado me convenció para suscribirme y saber que estoy con alguien que sabe del trabajo.
saludos
Thank s mike
👍👍
Super execele contenido,🎬📽️🎬 wuauuuu!!! 👌🚀Sigan así🚀 y saludos👍😃 desde zapopan jalisco México 😄🙋♂️
Such friendly comments....It's great to see sarcasm is alive and well....If you can't weld, why not!...Sometimes, you do what you have to do or can....
Excellent
Show,ainda não tinha visto desse jeito. Like
In der Zeit hab ich schon das nächst kleinere Rohr zugeschnitten und in ein Ende eingeschweißt. Das hält dann auch was aus
Super
I think it is a cool trick, and although I might never use it, it gives me ideas to store up, and use on future job that you need an alternative solution.
Smaller diameter section of tubing cut about 6 inches and stuffed into 2 larger pieces accomplishes the same thing and adds strength in a 1/4 of the time.
I love the idea I will be using it
I love it
Interesting, obviously for disassembly purposes good stuff man
Miguel Medina or extension.... Way to think outside the box
I had to check if this was an April fools video... It's not....
Muy buen travajo
Gostaria de rever o vídeo da mesa dupla face e do equipamento de fazer barras.obrigado!
Bom trabalho amigo 👍
What a waste of time. I'd be fired if I did that.
Me too. But I’m not a welder.
Get a better job.
Vocês são demais!!!
Just weld it. I don't think you need screws.
REAL welders don't feel the need to waste that time. Just weld it!
Real welders know the difference between SQUARE TUBING and pipe too.
@@bobjohnson7797 f1£×6/82
@@tomicask That's what I said.
No kidding !!
@@bobjohnson7797 yyyyyyhhýyyyhyyhyyyhhhhyyyhhyyhyyyhy
Awesome trick
good
sehr gute idee. danke
this is actually very useful if you want to connect a new one to an already vertically installed in high altitude , 2-3 meters. It will make it more secure.
Nice work.
What kind of camera do you use?
Wow!
You're very clever
Well theres 4 minutes of my life I won't get back.
Nice sir g
Rất tuyệt vời...
I think this guy just makes the guys in the welding world laugh
:) oh God, give me my time back.
This guy is hilarious. Imagine this dude on a construction site!
His nick name will be "double time"
Dotun Arowolo the fact that he’s using paint marker instead of soap stone shows his experiences
Hello cuanto te dura la carga de la esmeriladora ??
there are a lot of these stuff my welder does not talk to me about
What would you use this for?
I think for stands that require portability. Something you can quickly assemble for a job. You'd see this trick for painters or builders that can put together a large stand that would be good for a project then broken down for portability to the next project.
Finally we see,.why welders don't put it on you tube... because it's of no use
Nice!
Kating super sar
رائع جدا جدا
merci
Mantap....tp klamaan...tu
Klw butuh yg kuat...OK 👏👍
Holy Gloves 💥 Batman
Thanks mate if you haven’t got a welder it’s good idea to join metal together
And that's why welders don't talk about it
Make like him more solid because if you weld after cleaning the attachments for the two pipes, they are very precarious and risk to move.
Oh, fuck with the hell yeah!
I’ll get the boot if i didi this in the shop.
Damn it Carl! We're going to have to transfer to an outside position. Outside the company. You're fired.
Waste of time. Sleeve it, weld it. Why bolt it if you're going to weld it.
My thoughts exactly, I'm no professional welder far from it but the minute I seen him punch holes and drill I was like why bother 🤯
@@michealmcelchar2565 right. Just ridiculous
Well like this it wouldn't need a sleeve, kind of an inner sleeve that becomes welded through and over the gap. Source: 20 years of software development experience.
I figured he was gonna weld the seam. When he started drilling I assumed he was going to just drill through the outside and do spot welds. Pretty much slugging the tube, but then he went rogue.
It's stronger to put another tube inside....
Ok this actually brought tears to my eyes.weird
Track to the studio!!!!!!
mantap
Whats the point? I didn't get it.
Une usine à gaz et beaucoup de temps pour rabouter 2 tubes!!!
CARREMENT! Une cornière;2 serres joints >< Ca peut par contre être pratique si le poste à souder tombe en panne par contre : tout est bon à prendre,faut juste savoir faire le tri.Bien à vous.
Mantaap
Your gloves are in the same state as mine 😂😂😂
Its from flex xD 👊🏻🍻🍻
I feel you. I wish you'd see mine
Bien
We dont talk about it cos noone in there rite mind in my trade would do it ya gronk
‘Cause
No one
Right
Spelling errors. Make sure to check that!
@@__ok. im aussi i can get away with it 🤣🤣🤣🤣
Mitch Noyes it just adds character, I read it in an aussie accent in my head right away.
I'm a welder and dont want to be that guy, but the correct way to spell it in this situation is (their) not there.
Ich dachte immer Schweisser reden nicht weil die ohne Stimmbänder geboren werden. Dank dir kenne ich nun die richtige Antwort!
Danke!
👍👍👍
There are many ways of cracking an egg. An ideal joint for brazing. Thanks for posting
I don't know, but that seems like a good idea for me. I have a grill that sits too low... Adding a few inches will work perfect for my height
no idea why you think this is clever ................
bring him views
He's indian
Disculpa mi ignorancia, pero para que sirve?
splice connections?
😮😮😮👏👏👏👏👏👏...
☺👍
Hãy cho tôi thấy cánh tay của các bạn đến từ Việt Nam với ạ.
Мог бы не ставить болты, а просверлив верхний профиль сварить с нижним как и шов...
I thought this was some new way to strengthen a weld the he went and drilled holes in it and didn't even weld it . I have no idea wtf is going on here.
Same same 😄😄
Siap bosQu,,,,good,adakah orang Indonesia yang hadir di sini,mana suaranya,,,,😁😁😁🖐️🖐️🇮🇩🇮🇩👍👍👍
Saya kurang prcya, masa gk ada benjoln nya?
I get it...another way of joining same size square tubing - if you refuse to weld it, or your welder is broken, or...??
Welders don't talk about it because it's a backyard back that doesn't provide strength.
Sto je pjesnik htio reci
So why didn't you just weld it once you slid it together?
Bolts will hold better than weld
So it can come apart again of course
Toi bien parlerai le France !
👌👌👌👌👍
Sao không chấm hàn...nó chắc chắn hơn là bắt ốc. 🐚. Vĩnh Long.
Why do welders not speak of it? Cause it takes a shiz load of time, welding it out and grinding it flush even would take less time and end up with a better looking result
Yeh but how you going to unbolt a weld? Clearly this is made to be something that gets taken on and off, its a ghetto slip joint.
Dale Neish Welders use welds to build things, not bolts. The title of the video makes it seem as if it’s some hidden trick that welders avoid. Welders make things permanent
@@spudatbattleaxe what you've never made something that bolts on, its fabrication.
@@spudatbattleaxe o
Maneiro
To su cevi 40x40mm,u njih idealno ulazi cev od 35x35mm,lakse bi bilo da si ubacio cev u cev i zašrafio
Majstore, nastavlja se cijev istih dimenzija
Porque você não PERGUNTAR sobre isso!
I'M THINKING .. NOW WHAT ?