2000-2003 Harley Davidson Sportster Rear Wheel Removal, Tire Change and Belt Adjustment
Vložit
- čas přidán 13. 09. 2024
- 2000, 2001, 2002 and 2003 Harley Davidson Sportster rear wheel removal, tire change and belt tension adjustment tutorial. Part numbers, axle torque, spacer position, brake caliper all parts locations and orientation.
Help Support the Channel! No Extra Cost! Thanks for using my links!😁👍
Amazon Coupons! Free Savings! amzn.to/48nYdfJ
16" Rear Tire amzn.to/3ab9R48
Tire Spoons amzn.to/3bNl8Is
Motorcycle Jack amzn.to/3ygw0Ge
Belt Tension Gauge amzn.to/3uiSvt5
Torque Wrench amzn.to/3yjNfXf
Socket/Wrench set amzn.to/3Nz6EsU
Check out my Home Page! How to Do It Yourself, Health and Fitness, Financial & Business information, Multimedia Technology, Comedy, Links to save $$$ and more! czcams.com/channels/NsZOz2Fy6ZJu-XbO6V00wA.html
About to put new wheels and tires on my 02 sportster 1200 custom. Very great video. Straight forward but also informative. Keep up the great work!!
Thanks! 😁👍
Very fine video instructions. great camera and voice. I look for more. Thanks so much.
Thanks so much Mark and Patty! Appreciate the positive feedback 😁👍
You saved my ass! Thank you!
😂👍
Right on dude ! Killer step by step vid about 2 do both tires on my 06 883 xlh . U rock man !
Thanks Kyle! Good luck! I dropped a lot of f-bombs lol
Great detailed instructions. Thanks for the info.
Hey Rob! Glad it was helpful
Excellent video, about to try my hand on my 98
Awesome Myles! Good luck
@@ChrisBassettTV great success, I was able to change it!
@@rustinpieces1 that’s awesome!!!!
Great video but you forgot about the brake caliper removal
😅 nice catch! I guess I forgot to video that part…. If I remember correctly, you don’t necessarily have to remove the caliper to get the wheel off
Thank you
😁👍
Lack of experience on my end caused the rear wheel not to spin. It seems like the belt is now grinding on the metal cover for the front pulley, preventing the rear tire from spinning.
Could it be misalignment? I just want to make it movable so mechanic can take another look
Hey Jovan! Is the bike in neutral? Pull the clutch, you should be able to push it.. You can make adjustments so the belt lines up, if it i too tight it would be hard to move also, let me know 😁👍
What size socket do you need for the rear castle nut? I couldn’t find it mentioned in the video. Thanks
Hey Dan! I believe 1”… I can’t remember if I bought the socket or used a crescent wrench
When removing the wheel, will it clear the brake caliper, or does the caliper need to be removed first?
It believe it should clear, others say they change theirs without removing, I was following the manuals’ instructions
Which way do the grooves face in the small spacer go? Does it matter?? What are the grooves for?
I think the groove side faces outward but I’m not exactly sure. My guess would be that the groove is used in conjunction with pulling tool… for easier removal
Thanks 👍
😁👍
How should I go about tightening the adjuster bolts if I didn't take a pic of them beforehand? I replaced the rear tire, then buttoned everything up and took it down the street about 50 feet and noticed my rear wheel is wobbling heavy from side to side. I'm guessing I didn't tighten or adjust my belt correctly.
That’s a tough one…. There is a special tool that shows how far to press down on the belt ….if you look closely at the bottom there is a gauge built in.. and if I remember correctly 3/16 flex is what you are going for.. it’s around the 8:00 minute mark in the video
Is the 2005 simular?
Yup, they are real close 👍
Would this be about the same on a 96 sportster?
Yup, similar but minor differences