How To: Fitting Wind up Window Runners onto Glass

Nathan takes you through the correct way to fit your wind up window runners back onto your classic or vintage car window glass.

[@gobblezgobblez]

Great video! Just what I was looking for to do the glass on my 52 Fargo. Cheers from Canada!

[@chriswinters2991]

Watched both your removal and install videos. It was just the information I needed. Getting ready to do the windows on my 1953 chevy pickup. The kerosene was a great help. Thanks again Chris from Arizona USA

[@bobg9873]

Perfect video - clear and straight to the point. Did not have kerosene handy. Used charcoal lighting fluid successfully.

[@kentonfalerios8370]

Thank you for doing this How-To video. I was having the same issue but I was concerned about whacking the piece to hard with the mallet. I did everything just like you showed and it worked out great!

[@pyrotechc3h8]

Thanks for making a simple, too the point video. I hate the videos where they take 18 minutes to explain a 2 minute process.

[@gwolfe1231]

Thanks for this. Did my '65 Ford Falcon door glass!

[@MorrZilla]

Excellent...thanks for sharing

[@gregandsueplummer6759]

Nathan, your tutorial is appreciated. I just did this on a door window glass on my '68 El Camino. Went very well. Would have been reluctant to do it had I not watched your video. I don't have kerosene so I used mineral spirits and that seemed to work just fine.

[@cheriesmith8121]

awesome!! thanks for sharing :)

[@tjparkr]

Pefect thx great vid !!

[@nassarkhan5837]

Thanks mate

[@wheelbarrow01]

Thanks for the video - it’s helped me visualise how things all go together in general terms.

[@jackantoine5185]

Just put new glass in my Duece Coupe. Thanks for the instructions. Glass hammered in pretty easy but I think it's pretty well set and I will check it when it sets. How long should I wait for reinstall. Thanks in advance, Jack

[@georgelupold9044]

Would I use the same procedure for a model a door window.

[@langstonjones69]

So is lamp oil which is a purified kerosene, what you’re using? We have kerosene available at the pump in bulk but I also have plenty of lamp oil and just hate to go buy if I can just use what I have. Thanks

[@AliKhan-dh6sj]

Great video, what is a substitute for kerosene in the USA. Thanks

[@kevmo7773]

How thick of setting tape do I need for a 53 mercury monterey?

[@JHsteadiman]

Kerosene is not available in California? It has been outlawed? What else can I use, or is it time to move?

[@mikegellner2253]

Why not urethane ??