See the Fluidized Bed Powder Coating Process
Vložit
- čas přidán 7. 09. 2024
- Fluidized Bed Powder Coating is a process where a pre-heated part is dipped into a tank of fluidized thermoplastic powder, which is typically PVC or Nylon. This creates a beautiful and durable conformal coating on the part.
A fluidized bed is created by forcing air up through thermoplastic powder, making it flow like a liquid. This enables the powder get into all the “nooks and crannies” of the part being coated.
Typically, a fluid bed powder coated part is carefully preheated in a conveyor oven; dipped into the fluidized bed; reheated to make the powder fuse out; and finally cooled to room temperature. In some cases, the reheating isn’t necessary as the heat energy already in the part is sufficient to get the powder to fuse. Cooling is either done in air or water as required.
Advantages of fluidized bed powder coating include virtually no tooling cost, competitive piece price, and complete coverage of your parts.
Talk to us about how Piper Plastics can make fluid bed coating work for you.
We're Piper Plastics, and we're the big dippers! www.piper-plas...
When I searched "how does polyethylene powder coating work" I really didn't have high hopes of find an answer let alone a video with a perfectly clear explanation and demonstration. Cheers to you 🍻
I am working to build some fluid tanks and have had a couple failed attempts so far. I have read that some powders are too fine for this process. I am currently working on that research. I am seeing guys build very small tanks and coating fishing lures and such so I know it's possible. I believe the trick is the membrane choice between the powder and the air chest as well as the powder granularity.
Some people use 3D-printed compartment trays to distribute air and cover it with a paper air filter. Seem to work great.
You can upload a video of the fluidization to observe the complete process. Also consult him if the same material is used as the electrostatic painting
Is it possible to know the Pre-heating Temperature?
كيف. تصنيع.. هذا. الحوض. ❤🎉
is it possible to make this fluidized bed for epoxy powder?
Nice video.
Please what is the plastique type used
Can this apply to the TPU/TPE ?
Can you explain That how much pressure and flowrate have been given to make the beads or powder suspended in air?
About 15 to 20 psi typically
Is it possible to paint the aluminum door handle? And is it necessary to bake after this process?
Hi I’m a watchmaker and need to coat several sets of cleaning baskets in Rilsan. Do you offer coating services?
I wanted to know if dipping motorcycle rim into this using CHROME
Hello I want some questions can you help me
whats is the size of the powder
Send process specifications
how make the tank ?
How can i avail im from the philippines
Sir
How did you make the tank please if possible put a video
I am sure its proprietary secret. Do your research the parts are out there and readily available for purchase. Tank just takes a little common sense to build, good luck!
Mantab bos
How can I buy this machin
Sir pls send your contact no I want to buy this machine my job is mettal sheet pipe
HI is this possible with the plastic as well or its just metal that can be Coaten???? can you coat polyamide 12 with polyamide 12????
if the material can bear 200 degree centigrade than it can be powder coated
hi this is intresting process. wanted to set up new plant in India... kindly contact us..
Hi sir I'm interested to set up new plant. 9910937622
Where is your factory. Please conatct me 6360061384
Hiii
I feel bad....where are the views?
Haloo
Hi sir I want to know the type of powder used ?
The material is PVC.
PE and PA powders are typically used for coatings
@@vijaykowley7865 8826208562 I need setup
Call mi