Traxxas Xmaxx Necessary Mods!
Vložit
- čas přidán 13. 04. 2020
- The Traxxas Xmaxx is easily one of my favorite RC cars I've ever owned because of the beating it takes time after time, but like everything it's not perfect and could use a few upgrades. In this video I explain my modifications to the truck and the ones that you should do to yours!
- Auta a dopravní prostředky
Really a great in detail explanation about the Big Dogg X-Maxx. Appreciate it man.
Thank you for watching! I appreciate your appreciation!
very nice video man, good job, i wanted to know more about the xmaxx
Very knowledgeable. Thanks for taking the time to make videos like these..
Thank you for watching! I appreciate it 🤙
Love the fact that all of your upgrades dont break the bank since I just purchased my first xmaxx. Great video btw and thx for your input. 👍🏼
It doesn't need much, just keep up on maintenance and replace whatever breaks as soon as possible and you'll be amazed on how reliable it is especially for the size of truck!
same here just got the truck and am doing the basic 4 for now and this video was so so great and well done thanks
Solid video! Great info!🤙🏽🤙🏽
Thanks brother I appreciate it!
I appreciate your video.. Awesome job.. thanks for all your input..getting Xmaxx 8s soon.. cant wait 👍🤘
Thanks for the support! Hope you enjoy your Xmaxx as much as I enjoy mine haha
Great video, really good advice, tried and tested!!
Thank you I appreciate it!
Finally bit the bullet and bought myself an xmaxx last week,did the shoe goo drywall tape on the body,ordered rpm hubs/pins then went out and bashed it pretty hard stock,I couldn't believe how well it held up,my only issue was 'why didn't I buy one sooner lol' The only part you didn't mention which i think it needs is the roof skidplate,the Traxxas one that bolts through the inner roof bars,ties it all together nicely😊 I've now ordered all the other parts you've listed,so I thank you for that👍but my wallet doesn't lol 😁
Glad you're loving yours, it's a great truck! It isn't perfect and it isn't indestructible, but a few key mods make it a fantastic truck. In my opinion it's the best large scale truck on the market, it's extremely durable for its size. It's also pretty cheap to fix haha, any other large scale truck makes your wallet even more angry haha
Nice vid, sir! Thumbs up! Thanks!
Glad you liked the video, thanks for watching!
Great video brother! Thanks!
Thanks so much for watching!
Awesome video man!!
Thanks for watching!
Great video! Good to hear opinions from long time owners.
Thank you! It's my favorite RC by a long shot but I'm definitely not going to hide its faults! Nothing is perfect haha
crazycamkalani correct, I’ve never had a car I didn’t have to do mods. That’s the hobby! Love the XMAXX I might buy another one? Hmm
These are facts ol son!
Very good review very good to know considering I have one thanks dude👍
It's a great truck, I got a little bit of everything and this has consistently been my favorite RC out there :) It ain't perfect but hey what RC is? Tinkering them is half the fun!
the rc maniac with bright graffitti decal looks the best
I upgraded to CASTLE 2028, Mamba X ESC and a reefs survo. Recommend! Love the rugged remote
Very cool setup! The rugged is a great remote too, using the touch pad is a pain in the ass but overall I love the radio
I pretty much have the same upgrades, but I recently bought a new xmaxx and removed the entire electronic system and replaced it with a max 5 combo with the 1100kv motor, wfo stuff and 1.5 mod gears. It's a freaking BEAST now. I'm still testing it out, but the extra 1/5 power system is amazing!
Very cool! I love the extra power but I'm gonna keep with the stock motor to keep the weight down, after the extra gearing it handles a lot like my 8th scales
@@crazycamkalani I just tested my max 6 18/47 geared xmaxx against my max 5 25/35 geared xmaxx with the bigger motor. Yeah the 25/35 gearing is way faster and I can do wheelies even at full speed. Hehe. You can tell the extra torque too. The battery on the max 6 xmaxx does last way longer though. I can probably do a backflip with the max 5 xmaxx but I try to avoid that. The wheelies go way longer on the max 5 xmaxx. The max 6 xmaxx has stock tires and the Max 5 xmaxx has the duratrax lockups x 22mm belted tires. I had to reglue the stock tires again after this run.
The old tried and true Shoe Goo and drywall mesh tape does a good job or reinforcing the rear body. It doesn't stop damage, but it slows it waaaay down.
I just started working on a Rock&roll body with the drywall tape & shoe goo! Hoping it works haha I'm gonna do 2-3 layers of it on the rear end so hope it works haha
Nice collection.
I have the van too I have bashed the mess out of it and it took it really well I finally bought a diff body I got the tie die one you have there.
Nice bro
Well done video.
Thanks so much!
Great vid, Xmaxx is the ultimate R/C super tough and durable, fast and powerful....i have never ruined spur or pinion WITH stock motor & ESC...im a fan of the xmaxx!!!! 💯
My xmaxx sometimes does not want to move forward ar backwards what could it be and what kind should I replace it with
Good video and best advice mate. You looks as Aaron Kaufman of RC.
Haha thank you!
Love this.
Thank you! Thanks for watching!
Awesome vid my RC friend 👍 SUBBED
Thank you! I appreciate it!
@@crazycamkalani yessir we all should do our best to support the RC community
Great info and nice parts recap at the end. If you can hold the camera steadier or put it on a tripod next time it would be nice as I had too look away after a while. Keep up the good work and THANKS for waving the American Flag!!!
Thanks for the feedback! Still getting used to taking on camera haha
Thats not an American flag it is a U.S Flag, see 28 usc 3002 (15) A
@@leevongilmore2070 surely you could have picked up on something more useful to comment on in this video besides criticizing mi man about his good ol’ US of A AMERICAN flag....
Great video mi dude, I personally learned a tid bit of information watching your video and I thank you in advance kind sir for helping to save me a bit of cheddar and potential frustration.
Keep up the good work.
@@Xiggy4Ever sorry I can't allow people to be incorrect you can choose to do what you want with the information I wasn't talking to you anyway.
@@leevongilmore2070 so your one of “ those guys” I am truly sorry to hear that.
The fact that the first mod you mentioned is an American flag is great man. In the market to buy one if these trucks and you just got a new sub. Keep giving great content my man!!!
Thanks for your support! Always happy to help🤘
I'm surprised you havent changed the plastic shock caps. Good info on everything. Thanks!
Yeah I have actually never broken any in all my years of Xmaxx carnage, so from my experience it's not necessary to upgrade. Even if they were to break they're real cheap, and if you go over to metal you have to be careful to not over tighten the cap so you don't destroy the shock bladder(I made that mistake before on a different RC)
That's awesome, needed this thanks
Thanks for the ear plug trick!
Absolutely! it's a great mod that's super cheap to do and it doesn't negatively effect the durability :D
@1.22 that's a eazy fix , infact iv done all 5 of my RC TRUCK BODIES with " Shoe Goo " " & fiber board tape " stronger than factory 🏭 to stop cracking around the XMAXX BODY ,
Boil the stock parts in water. It adds a little moisture and gives a little flex
Hello sir. Nice review.
Great video! Really explained some questions I had before I take the dive into this hobby. Can you tell me where you got the decal for the RC MANIACS body?
Thanks you!! Honestly even though I absolutely love this truck I wouldn't really recommend this as a first truck, I would highly recommend something smaller first like a 1/10 or 1/8 scale, for example the Maxx is an amazing truck, it it's basically an Xmaxx that got hit with a shrink-ray and that one is easily the strongest truck box-stock. The Xmaxx is one of the best trucks on the market but at the same time it's a huge heavy truck with big expensive batteries. Definitely buy one, but to start out I recommend getting something smaller so you can get used to caring for Lipo batteries and get used to driving them.
The wrap is from Darkside Studios, that specific one is called the Ruckus. They make that wrap for all kinds of stuff 👍
Great video mate! I just ordered a new X-MAXX and this video really helped me understand what i can expect to be ding in the process of having fun and breaking things! I've heard from a few people that the pinion gear definitely is a weak spot with the grub screw coming loose pretty quickly. People have been taking the grub screw out and putting some red loctite on the threads to stop it coming loose. Do you do this to yours? Cheers from Australia. Thanks for sharing mate!
Yes, adding more loctite to the pinion should help keep it from slipping. I use blue loctite because it's easier to remove than the red stuff, what I do is I let a tiny bit of loctite get onto the very end of the grubscrew, that way there is a very small amount between the motor shaft and grubscrew. Thanks for watching!
What do you think about belt drives for xmaxx I’ve been considering it sense I always have issues with gears
Haven't tried them personally, I do like the concept but it's not my thing. I'm sticking with the stock motor myself and it's definitely not needed with that, but on something like a 1/5 motor it may be worth trying!
Drywall tape and shoe goo are great for the body. Kevin T has a video on how to do it. I did my XMax a d it’s amazing, lasts much longer.
i just very recently tried it on a rock & roll Xmaxx body, can't wait to durability test it haha!
Use silicone *clear/grey/black/blue instead with drywall tape.. its way cheaper.
Where did you get the graphics kit on the honnigan indestructible body one? It looks awesome. Also great video. Just ordered my first X maxx. Can’t wait to get it. Hopefully can find some cheap decent batteries for it now lol
The wrap itself is from darkside industries, and I sticker bombed it, so anything that doesn't look like a zombie is all stickers I threw on it haha. I highly recommend Turnigy batteries, they're cheap and work really well. Get yourself a name brand charger like Hitec or Venom and get the cheapo lipos with a good warranty, I go with turnigy for most of my lipos. Most packs put out almost exactly the same performance so just go cheap with them so you can have more in your arsenal!
Man, that was informative...thank you for sharing! I was literally taking notes. I’m new to all this and have a dumb question...how do the silicon ear plugs improve throttle response/traction and where do you install them? Thank you again. Excellent video!
Thank you for the kind words I appreciate it! Basically the silicone earplugs, by them being super stiff what it does is it "locks" up the center diff where you would normally put some sort of oil (so the differential can do its job for traction). By tightening up that center diff you lose a bit of overall traction but you distribute power more evenly front and rear so the truck will wheelie/backflip/launch harder, when the diff is loose you lose power on the wheels that are up in the air
@@crazycamkalani makes sense...thanks for getting back to me. Much appreciated!!!
Thank you very much. I found this video very helpful. So I got the tekno 20t and GDS 50t on the way. My xmaxx is pretty much stock except for RPM rear hubs and proline bash body. Will the stock ESC be enough for 20/50 gearing or do I need to upgrade to max6?
With the newer versions of it it should be fine, I've seen people run taller gearing than 20/50 without issues! When I bought mine it was when a good amount of ESCs turned into fireballs because of faulty switches, I never had an issue with it myself but I swapped them over just to have smoother power delivery.
@@crazycamkalani Thank you very much. So I'll be running 20/50 on stock ESC. Just ordered max6 just in case the stock ESC goes bad or I get bored whichever comes first haha. Thanks a lot man.
@@KangHM no worries, happy to help! Hopefully you enjoy your Xmaxx as much as I do haha
Hi i m not a pro in this hobby i got some questions. I found a almost new xmaxx with some rpm upgrades and Max 6 for 850$. If i buy that do you guys think i can sell it for almost the same Price a year later ?
It's possible, depends on how you drive the thing, if you beat it up it wouldn't be worth as much but if you take care of it you can reasonably get more money out of it
Shoe goo and mesh drywall tape will do the trick to strengthen stock bodies... definitely.
I started applying shoegoo/drywall tape to one of my xmaxx bodies, I'm going to try bashing it soon! I'm going crazy with it on the bed area cause on my original truck I messed up the body so fast
Haha my new 4 day old xmaxx has road rash on the case very annoyed and a slightly loose rear a arms after casing 3 turn at a bmx park think I got off light thought for the many rolls though it runs fine by far it is my favourite rc now might have to order one of the bashing bodies over to Australia once their back in stock as that would solve the issue.
What Receiver are you using with your blue xmaxx and the DX5 RUGGED?
I forget the exact name, but it's one of the receivers that doesn't have an antenna on it. It might be called the 2100?
What's the name of the 3rd tire from the stock tire? And where did you get them?
It's Mad Max Land Grippers, I bought them a couple years ago from a guy that doesn't sell them anymore, but they still make them I'm just not sure where they sell them anymore
Great vid man. Really helps! I’m having a hell of a hard time finding the gears that you recommend. Can I have the part #s and where I can get them?
Thank you, happy to help! he GDS spur gear I've been ordering from Amazon(I dont know the part number sorry) I would avoid getting them from ebay because they have a bunch of fakes there, Amazon's GDS spurs seem to be genuine and they've been working perfect for me. The tekno pinion I've been using the 20t one and its #TKR4180, I order those from amain hobbies.
Thanks man. Awesome!
Guess u like an x maxx, wonder if u have any of the maxx's 🤔 good info inside here my man🙄💎 absolutely Awesome, thanks for the time taken
Yes I have two Maxxes! Got the first one the day it came out in October, and bought the second one in like February. It's the exact same truck but smaller I love it!
@@crazycamkalani intoxicating package that small maxx, more so in Green😎
What’s the silicone ear plug you speak of for the center diff. I’m picking up a Maxx today and wanna go through it and make sure I start bulletproofing it.
So hopefully you know that RC diffs are intended to use silicone oil to tune how much the diff will move for a limited-slip effect, you can buy these silicone putty earplugs to effectively "lock" up a diff because they're super thick, it drives as though the diff is locked but it can still move just a little bit for durability. If you get the right earplugs theyre made of pure silicone putty. Honestly with your Maxx you should just drive it as is, you probably won't need to upgrade much on it, it has a really good diff setup box stock
@@crazycamkalani right on, just getting back into the hobby and first Maxx. Of course I have the dreaded clicking noise (bought it used) going to be pulling the front dif tonight.
So new to this picked up a beat on Xmaxx it seems ok for the most part. Well being farm kid I went through greased the diffs with bearing grease after cleaning black stuff out... was that ok? So what will I expect might happen cause I did... nothing by the motor figured that gets hot don't need grease spraying around there. Well many things on truck were rusty so wd-40 most of it get a coat on.... check back but cool video!! Trying to order bearings now do see 👀 bearing cover bouncing on the wheel drive shaft so should replace asap where do you buy parts?
You upgraded fans man to run 20/50 gearing ?
Awesome info! Thanks man! Where did you get the American flag xmaxx stickers?
Glad you liked the video! I got them on Ebay a couple years ago, im not sure if they still sell them
200 comment. What do I win? Lol subbed you're you're well on your way to 1 million subs
Nice presentation. Very nice details. What kind of stand that XMaxx sitting on please?
The one in the background is a ridgid stand, I forget what they're called but they have them at home depot, they come in a 2 pack for ~$80, theyre easily the best stands I've seen! 10th scale cars are a little too small for it but anything 1/8 or larger they sit on there perfect and it's super sturdy!
AWESOME VIDEO MAN! WHAT INSPIRED U 2 BUY THE SNAPON MODEL?! -AAND, IS IT THE XACT SAME MINUS THE NIFTY BODY?! THANKYOU.
I had the idea to make one into Sweet Tooth as soon as I saw one haha. I got it used for $600 when it was relatively new. And yeah everything is the same, the major difference is the body. Shocks are the same with slightly different springs, the rear springs are definitely a bit stiffer, but I believe the front springs are the same.
What receiver did you use with your dx5 in your xmaxx?
Umm I would have to double check the name but I'm pretty sure I have the SR2100 receiver in there(2 channel rx with an internal antenna)
What are you using for batteries and charger? Since you added xt90 connectors to max6 esc, curious how your connecting batteries if using traxxas ones. I just received my max6. Currently using traxxas batteries and charger. So thinking about best wiring option.
I run mainly Turnigy batteries because they're cheap and have a good warranty if something goes bad, and yeah like in the video the XT90s are my connector of choice for most of my stuff. The max6 power leads are 10awg so if you're already using their batteries and if you can get ahold of the male Traxxas leads it's not too hard to install them on the max6. Charger wise I use the Hitec X2 and Venom Quad chargers, the Hitec one out of those two is much better.
Another thing you could do is put different(larger) connectors on the max6 itself and use an adapter, but I definitely wouldn't recommend doing that because it's one more possible failure point
@@crazycamkalani thanks for tips and recommendations.
@@FedoraTech No problem! Thanks for asking!
cool
Thanks for watching!
What wrap did you have on the unbreakable body an got a link for it
I don't have a link for it on hand but it's the Ruckus wrap from Darkside Studios, my version is renamed to mad max which was from this guy Nathan Cation who used to sell a bunch of Xmaxx upgrades a few years ago.
Where did you get the box body from?
I bought it used on FB marketplace when the thing came out in ~2018. Snapon truck dealers gave them out and/or raffled them off. They're a legit special edition Xmaxx with that box truck body and light kit.
That 7px remote. And i thought a nintendo joycon was expensive!
It wasn't easy on the wallet but man it makes such a difference haha, in my case it makes the whole RC experience better cause I only need to bring one or two radios when I go out to bash cause the higher end radios can hold a ton of different models!
The only issue i have seen with the RPM arms is that they open at the ends, which does 2 things, lets the pins fall out, and usually splits the arm down the middle.
Threaded pins stops that and makes the RPM arms way more durable than the stock arms.
Also - soaking your RC parts in WD40 doesn't make them more flexible, has been disproven plenty of times. Still dont know why people do it 😂
When I was running the rpm arms they kept snapping in half between the inner hingepins and the lower shock mount, similar to where my stock arms snap, but I get 10x the life out of the stock arms than I did with the RPMs. I got bored of hitting up RPM every week for a replacement so I just went back to stock and it's been fine for me 🤙
And as for the WD40 trick it doesn't work with everything but when it comes to Traxxas' plastic it does in fact make them much more flexible, I havent done it to my xmaxxes but it made a huge difference with my Slash arms
How well do the stock tires hold up to the 20x50 gearing?
I've had the best luck with stock tires, just have to vent them properly and put some gorilla tape on the inside of the wheel so it doesn't get any water/dirt inside(thats what causes the blowouts)
@@crazycamkalani Thanks for the info I do appreciate it👍
@@johnsorensen5758 any time brother thanks for watching 🤘
What do you use the Mack's silicone ear plugs for???
It "locks" up the center diff, it's basically the same stuff as diff oil (pure silicone) but it's much thicker so throttle response is great, but since it's just a putty it can still move under huge loads for durability
@@crazycamkalani ok Kool thanks
Im wondering about the upgraded ESC. I decided a few years not to get one because of the problems. Maybe Traxxas got the message. The price Traxxas charges for the truck, it should have an ESC that doesnt catch fire.
As far as I'm aware the only ones that had fire issues were the 6s models that had improper soldering on the connectors. I haven't really seen stock ESCs blow but they do tend to fail. The ones I've used seem to have pretty good safeguards on them to shut them down before any real issues happen. I've had more Castle ESCs catch fire than my Traxxas ones to be honest lol
need links to the parts below
Far out Dude tripping out , How eazy is it to change the ESC overto MAX6 from Factory ESC ???
Thanks Dude far out
Its very easy! The motor uses the same size bullet connectors as the max6 and recalibrate it and its ready to rock!
Can you put a 8s in a stock xmaxx?
Every single brand new xmaxx yes, the only ones you can't put 8s in are the original 6s versions
what car stand you rocking?
The one in the background is an old ridgid stand, I forget what they're called but usually they come with the rollers on top, I believe they're called "portable work support" or something along those lines
Kinda old video so maybe a little late to comment lol...BUT, I purchased the Tekno / GDS gears per your video but they say do NOT use the Traxxas pin system for the mesh. Seems you have changed your gears out quite a bit so I was wondering how you go about meshing? It seems like it might be a little tricky to mesh properly on this truck without using the pin system? I haven't done it yet so no idea. And I wonder why GDS says do not using the pin system? Is it like a size thing?
I was wondering the exact same. Let me know if you find out an answer!
@@chrisrodriguez206 WIth stock Traxxas gears that pin system is great. WIth Tekno/GDS spur they recommend you mesh it manually without the pin system. I set the pin system first for 18/50 which is the gearing I am running with a tekno pinion/gds spur and it was way too tight. So I moved the pins to 20/50 and they had too much slop, even though I think I could of ran it awhile in this setup but I wanted it tighter. So and the end of the day I removed the pins and used the paper method between the spur and pinion without the Traxxas pins...perfect mesh. It's definitely more of a pain to do since you have to hold the motor and put pressure on the pinion while you're screwing in from the bottom of the chassis but if you want the perfect mesh that's what you have to do.
@@seth9145 thanks Seth! I just set the mesh yesterday with the pins out. Gonna take it out later tonight and see how it goes!
@@chrisrodriguez206 Let me know how it goes. The mesh I have set perfectly so not worried about that, but I am worried under heavy bashing if the motor stays put to maintain that mesh. Because without the pins it's really relying on the bolts to keep it in place so technically it'll be a little less stable without the pins. I'm curious if it moves under heavy bashing/hits.
@@seth9145 took it out today and ran perfectly. But I too am worried about how secure it is without the pins. If down the line it comes loose, I’ll probably look into a metal motor mount that way the screws can be loctited
That earplug center diff trick is a must!!! Link to how to here
czcams.com/video/TDy5q5OPGcg/video.html
Standing backflip time!!!!
Where did you get the hoonigan body
It's just a sticker 👍 the wrap is Darkside studios and I just threw additional stickers on top of it
@@crazycamkalani thanks
Rpm pins are better 3mm so you can put them in the front. Rpm wheely bar is the best ever.
Rpm arms ? Your break all them and get rpm then break all them but it worst? Sound the same. Best part about rpm arms is they will go on any side. Big money saver
Pins in the front probably help with breaking arms . Same with the top inside pins all around.
Great video 🎉
.. another mod "Don't goto skateparks", will also improve your bank balance.
Yup! They stay a lot cleaner but man I break a lot more haha
@@crazycamkalani i launched my xmaxx 15-20meters x100 & eventually it split into two pieces with repair cost $300.. never again, even when you dont launch it the turn pipes ripp the crap out of the tyres which already have longevity issues with the foam.
I'm surprised the servo is not in the list of upgrades
What tires are best
For the type of bashing I do the stock tires have been the best, they're super lightweight for their size so you break less parts
Shouldn’t be called unbreakable bodies, it should be called harder to break bodies!!🤣
Awesome video thanks for the tips when my aarms break I'm goin with the traxxas hd arms and see how they are
Haven't bashed hard enough to break any arms recently so I haven't been able to test out the HD arms yet, but I can certainly say they're better than the RPM Xmaxx arms, those were absolutely terrible when I had them!
I've been sticking with stock forever cause I'm fine keeping that as a breaking point because they're cheap and easy to get to haha
Go Traxxas HD in front, and RPM rear, jumps sooo much better with some flex in the rear:)
I just got my xmaxx
Good video but dude you seriously need to slow down on talking and showing things lol
Thank you for the feedback I appreciate it! Yes I definitely need to work on my speaking haha
The answer to 1984 is 1776!
We could definitely use a good revolution right about now haha
How much price xmaxx
Too much 😂 well actually for what you get its a great value, its ~$899 usd
I don’t understand why a guy would want multiple of the same RC 🤔 I have 2 & wouldn’t buy the same of either unless one was unrepairable.
I usually don't as well, but in the case of the Xmaxxes I like them so much I wanted another one to have as a "spare", then I got the idea to get another one to use specifically in wet/muddy conditions haha. To each their own though buy whatever makes you happy and don't let anyone else sway your opinion on it!
@@crazycamkalani well I suppose if money ain’t an issue heck buy half a dozen lol I’m thinking I’m stopping at 2, a big basher & a 1/10 SCT for speed, between the 2 I have enough RC stuff laying around 😂
Hello sir.
Who painted that rc maniacs
It's a wrap from Darkside Studios!
Whys does he have 3 of them wtf 🤨🤨🤨.
Sunday May 17 2020 Almost morning 1:20
hustlegang911
He explained that at the beginning of the video. Also, I guess it’s because he can. Nothing wrong with that.
@@jskaggs8188 yeah pretty much haha, one for hard bashing, one snap-on because I wanted to make sweet tooth, one for wet/muddy bashing!
Yeah first thing I would do is ignore your flag and use my own Australian flag 🇦🇺 but other than that those are some nice rc's I'm getting an xmaxx soon
Hopefully you enjoy them as much as I do! Out of everything I own the Xmaxxes continue to be my favorite RCs, they're definitely not the most convenient to travel with, but if you have the space to run them they're pretty amazing to drive, and when you jump it the sheer mass of it flying through the air is super exhilarating!
Obviously RPM aren't paying you 😂😂
I buy everything with my own money lol. Bad products deserve to be called out
Great job , xmaxx is the best rc truck can you tell us more about the tiers and from where we can get them
Please subscribe to my channel it's Massou rc I need some support for my channel Thanks
Liked ur vid from the start with the flag, so thank you.. good video but you repeat yourself at least 3 times with almost every topic. Save urself (and our) time and just say it once and move on. Plus u will get more views if they need to watch it again. Lol
Oh yeah it gets a bit annoying when I'm editing I annoy myself sometimes haha! Still getting used to the video thing, thank you for the feedback I appreciate it!
Hey twitch put the joint down .
The only mod that you need is to dump any Traxxas product you own and buy a new one from a respectable RC company, not those sharks called Traxxas.
yeah let me spend a 1000$ on the xmaxx 8s 500$ for batteries and charger and now have to replace almost all moving parts to modify upgrade everything because the whole interior of parts are all junk what a waste of money total fricken rip off. 👎👎👎
Nothing's 100% perfect box stock, for the type of abuse my xmaxxes get it's not a crazy amount of parts. If you watched the video you'd see how little it really needs 🤷♂️ I got some cars that'll break $100+ in parts every run and my xmaxxes usually cost $10-20 depending on what I break that bash session. For the size of truck it's unbelievably reliable and cheap as hell to upkeep.