ESP32 Arduino RC Sound & Light Controller: New GMC Sierra, Volvo FH, Engine Brake Option
Vložit
- čas přidán 28. 08. 2024
- In this video: Software Update v6.9 for the ESP32 DIY RC Truck Sound & Light controller
- New "JAKEBRAKE_ENGINE_SLOWDOWN" option, used in Volvo FH trucks with open pipe. If defined, the engine RPM is lowered, using the jake brake, while upshifting under full load as well as when the throttle is released quickly in neutral. You can hear it in this video: • M. DE GROOT VOLVO FH o...
- New volvo FH with open pipes
- New GMC Sierra V8 Pickup with 3 speed automatic transmission
- A lot of new horn melodies
Your supplier for the pre assembled Open Source Sound & Light Controller: www.pcbway.com/
Official WPL store (affiliate link will support the channel): www.wpl-rc.com...
Sound Controller:
Virtual 3 speed transmission: • WPL B36 URAL-375D With...
Flysky support: • The Best Engine Sound ...
Revving sound, Kennwort sounds: • ESP32 Arduino RC sound...
SCANIA V8 Open Pipe: • Worlds Most Realistic ...
Light & sound controller features:
- Sampling rate up to 22’050Hz, instead of 16’000
- Multiple sounds can play simultaneously
- real DAC outputs, no R/C filter circuit required
- the variable speed engine sound can play at the same time as an additional sound with fixed speed (a horn or a siren for example)
- A lot of pre configured vehicles are available
- special sounds included like: „Martinshorn“ fire truck horn, US Police siren, Swiss post bus horn, train horn, car horn, MAN TGA truck horn
- Engine sounds for: Land Rover Defender V8, ford Mustang, Chevy Nova, Dodge Challenger, MG B GT V8, LaFerrari, Scania V8, Ural V8, Kenworth, CAT, Detroit Diesel etc.
- Air brake & jake brake sounds
- Output for vibrating motor, which simulates engine vibrations
- Vehicle inertia simulation (if crawler type ESC is connected to pin 33)
- Virtual clutch, making the engine sound much more realistic (if crawler type ESC is connected to pin 33)
- simulated manual 3 speed, automatic & double clutch transmissions
- The TAMIYA 3 speed transmission is synchronised in software and can be shifted while driving
- Many light functions like headlight, tale light, brake light, indicators, blue light, foglight, sidelights, high & low beam
- 6 PWM RC servo signal inputs
- 13 light outputs
- PWM, PPM, IBUS & SBUS communication, makes it compatible with most common remotes
- The pre assembled SMD PCB can easily be ordered according to: github.com/The...
Material links for sound controller:
- PCB including SMD components assembling: www.pcbway.com/
Banggood Weekly Coupon Deals: goo.gl/D8B1Mu
Banggood Weekly Discount Deals: goo.gl/uGS7Lf
- ESP32 board: www.banggood.c...
- PAM8403 amplifier: www.banggood.c...
- Speaker: www.banggood.c...
My DIY Open Source Arduino Stuff:
github.com/The...
github.com/The...
github.com/The...
www.thingivers...
github.com/The...
Check out my other RC videos: • Remote control
My GitHub: github.com/The...
My Thingiverse: www.thingivers...
Follow me on Twitter: / thediyguy999
on Flickr: www.flickr.com...
and on Instagram: / thediyguy999
If you want to support this channel:
/ thediyguy999
paypal.me/thed...
#TheDIYGuy999 #ESP32 #Arduino
You are the DOCTOR for this
Thanks
RC JAKE BRAKE!!! Now that's impressive. I wish I knew how to do that kind of stuff. I've never touched Arduino before. I'm an Old Fart, not sure I could.
Thank you. Just have a close look at the GitHub link in the video description. It's not as hard as you think.
Love this project. Aiming to dive into it soon.
Thank you. Yes, you should!
Cool ! 👍😎
Thanks
Thanks man, your sound module is amazing!!! The sound is sooooo realistic with the gears and the reving, it's mind blowing! Could you please make a tutorial on how to create a new sound file?
Thank you. you can find a description in this document:
github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
@@TheDIYGuy999 Yep, I read it carefully but still I'm a bit fuzy about how to cut and prepare the samples. You know what they say: 1 picture equals 1000 words ;-) I couldn't find a specific tutorial on audacity that explains clearly the steps for this specific usage. There are some but they are for other uses like games. Anyway, Thanks you very much for this beautiful module and all of your answers, you're golden dude!
Do you sell the sound kit as a preassembled pcb ready to install?. This is awesome and alot better than the tamiya mfc system. You sir are very talented
please update the remot control and the receiver to 6 channel
Do you have the schematic of this RC controller? Looks like you've added more channels and a screen that aren't original. Very interesting this modification of the remote control
is possible to connect the DIY transmitter to crossfire or ELRS module? i want to long range fpv car
it is very nice👍👍👍
Thank you
hola, si quiero construir el control que muestra en el video que video tendria que ver, gracias
I like thiss😁
Thank you
Sorry sir, permission to ask, why the latest esp32 firmware for PWM signals can't be used for flysky gt3b/c remotes, even though the previous version can. thank you please help
It still works, but you have to make sure not to enable channelAutoZero for unconnected or channels without spring centering
@@TheDIYGuy999 for that program, in which part of the program, sir?
and what should be changed?
thank you very much
Can i use like a power bank baterai directly to the esp board?
Plis share how to make the transmitter sir?
i build the code and upload successfully on visual studio code, but when i control by flysky, the sound did not work. the blue led on board esp32 is blink repeadly.
Have a look at the serial monitor.
👍
Thanks
How you learnt that stuff?
Some basic electronics in school, the rest by myself
Help! Can anyone make everything available in an arduino file and its libraries? For a simple mortal like me, who doesn't know English and is learning programming???
Hilfe! Kann jemand alles in einer Arduino-Datei und ihren Bibliotheken zur Verfügung stellen? Für einen einfachen Sterblichen wie mich, der kein Englisch kann und Programmieren lernt???
Socorro! Alguém consegue disponibilizar tudo em um arduino file e suas bibliotecas? Para um simples mortal como eu, que não sabe ingles e está aprendendo Programação???
this is awesome, I downloaded the code but I don't know what to edit what should I do?
Thanks. do it according to:
github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
Note, that you shouldn't change anything in the tab on the left hand side (main code)
I will try to download again seems I got error compiling
NAME OF TRANSMITTER AND RECIEVER
It's DIY:
github.com/TheDIYGuy999
Can i order,?
You can order the pre made PCB according to the PDF in this directory:
github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/tree/master/Eagle_PCB