I'm going to say this right now. Don't gut the interior of the new Lexus. I think it would be bad ass to have a luxury car that can also drift like mad. That's probably one of the nicest cars that y'all have ever bought, don't fuck it up.
I feel like it wouldn't be the same anymore, not since the atmosphere of the channel has changed this much. I'm so nostalgic for anything old Haggard Garage tho.
Be grown. we miss Dylan. And the miata that could is Dylan. Why are Orion driving and giving his car away ? hope not they are ending Dylan over stupid chow. I Cant stand him. He so stupid, and i dont understand him. Only the fuck finger every 13 sec. Bring Dylan back and cam. An make some Og Videos without chow noise. only him behind a camera
You know what I really like about these guys, the video's seem uncensored as fuck... Car breaks down, fuck up filming, basicly anything goes to shit, and we get to see it
The best Haggard Approved part of this video 3:30 / 4:39 glad to see you went with factory/dealer axles so you won't have to do them over in about 6-months with the aftermarket axles. Orion's choice = MINT.
You probably wasted your money on those axles because the issue is likely the inner bearing or wheel bearing. Also the axle isn't bad unless you snap it or worn a bearing out so bad it's carved into it because the universal joint is replaceable. If the bearing was bad enough to fuck up the stub shaft you can also buy the stub shaft separate for a hell of a lot less money and just replace that.
FixxxerKH202 it definitely was not a wheel bearing, it was obvious the stub shaft u-joint was shot. They could just replace the u-joints but it's probably easier for them to replace the whole axle shaft
Guys, a tip for drilling stuff out and looking after your drill bits - just put a bit of random engine oil in a little pot/cup/whatever and dip the drill in it regularly to keep it oiled up whilst drilling. Always keep your drill bits oiled/lubricated when drilling heavier metal jobs.
Zack I think since he has to take that much off as it is he just wants to do it all, I don't think those axle shafts would go out, but I mean any things possible I guess, he's just "extending" the life of the dually😂
THATS what i like with haggard garage! When a diesel car/truck interrupts the conversacion. I'm the same..... I should be in the channel ;) DIESEL HEAD for life!!
what happened man i miss the happy medium build video im so sad ! :( its what inspired me to get a 328i cams reaction was priceless i watched it on a daily!!
Chris Maynard I don't think so. He didn't stick with rudnik when all the viewers wanted it, and he stuck by his mate dylan when all the viewers bitched about him
Joel's Stuff I may be wrong but I think Chris left haggard and if he didn't he is much better off now imo and although Nobody like Dylan it did bring in viewers to rip into him in the comments
The best way to take off rotors with stripped/rounded off Phillips bolts; take a cutting wheel and make an "X" on the center of the Phillips bolt "NOTE: this will also cut into the rotors so if you're replacing them it's fine but if you're resurfacing rotors then be aware how much you cut" once the Phillips bolt is cut into four pieces, using with a hammer hit the back of the rotor and the rotor will push through the Phillips bolt. Hit it and turn the rotor, once the rotor is off just cut the Phillips bolt off and grind it down using a die grinder until it's flush with the hub! I do it all the time at work and it never fails.
Who buys 1200 dollar axles when u can just replace the axle joint for 50 bucks a axle. Talk about just wasting money. Even if u dk how to do them u could of take the shafts to a driveline shop and they would have rebuild them for 300-400 for both.
You can get a gadget that plugs into a phone or Ipod that sends out on a radio frequency. You then tune the car radio to this frequency. That means you don't have to have a scanky wire in the tape player. A usb charger socket mod would be a good vid to do.
YES CHOW!!! Good to see you've got a nice VIP daily after the bulls**** that happened in your 240 I'd love to enter the Miata sweepstake so I can support you guys but I'm in the UK so I can't Give Norfolk UK a shout out in your next video Orion 😉
Im running ls400 calipers on my 99 gs400.. those rotors not cheap. i currently have drilled and slotted . def looking into some stock rotors. Cant want to see the hoonin !!
I lmfao at the end when chow said "I'll let you drive mine since dan took yours" lmfao
Cody King LMFAO
Cody King sorry didn't watch that far ululululululul
Cody King didn't like chow to much at first but he's fucking jokes
Michael Da Re same I honestly used to hate him
Michael Da Re as if nothing is better than chow he funny af
You really are dailying chow
Still need to slam him
Bridge VanderMolen LOOOOOOOOOL
Bridge VanderMolen people said they wanted to see him, plus he brings new content with his new car
Bridge VanderMolen i
Jacob Kreamer i totally agree
"Why am I driving the lexus?" - "You know, since Dan took yours, I have to give it to you"
that's why I love chow
pasteaux oh that's what chow said
Dude Chow's 240 broke on the 14th of May and his paper number plate was 14240 xDDD
Let Dan work on this Lexus too lmao
Oh dear lord LMAO
LOL
Lmfao won't be seeing it for another half year
lmfao
I'm going to say this right now. Don't gut the interior of the new Lexus. I think it would be bad ass to have a luxury car that can also drift like mad. That's probably one of the nicest cars that y'all have ever bought, don't fuck it up.
Brandon dually is alright but at the end of the day that Genesis is just a Genesis
Not to mention it's a coach edition, they're fairly rare.
Factory New Garbo Please!!!
Oh really? I didn't know a Genesis was just... a Genesis. Thought it was a plane maybe?
That cars ugly asf
Bring back the turbo intro
mk4Dann and outro
YAAAASSSSSS I miss that soo much :(
I agree!
dude Chow snap so hard I don't give a f*** what anybody says Chow makes this channel no matter what
I feel like it wouldn't be the same anymore, not since the atmosphere of the channel has changed this much. I'm so nostalgic for anything old Haggard Garage tho.
Chow with the Dan Lexus burns LMAO.
do a Q&A for all your subs wandering what's the deal with the rest of the crew
On a real though were is Cam and Dylan?
Emil Schmidt cam is with his family ! check his snap !
Lucky Rooster Nice memes
I could care less about Dylan. Cam needs to come back though.
Right??? #bringbacktharapist #returnofcam
Be grown. we miss Dylan. And the miata that could is Dylan. Why are Orion driving and giving his car away ? hope not they are ending Dylan over stupid chow. I Cant stand him. He so stupid, and i dont understand him. Only the fuck finger every 13 sec. Bring Dylan back and cam. An make some Og Videos without chow noise. only him behind a camera
My dude Chow rules, slam that thing! And a straightpipe for old times sake
Chow and Jimmy are my favorite people ever
That Lexus is so clean, I really hope he doesn't ruin it and end up destroying it
Sean Logan you know he will though. Unfortunetly
Sean Logan if it doesnt get that haggard touch, then it aint right
"Everything Works"
*Speedo Is Broken*
Jared Shattuck I'm glad I'm not the only one that seen it.
Slam Chow's LS400 on hockey pucks, OG Haggard style
TimmyM56 I just fucking thought that lmao
The Lexus is more legal than chow
JWJ LOL
When you buy axle shafts for no reason. Replace the U joint first before then shaft.
Chow makes this channel more fun to watch! love ya Chow!!!!
Next video title: slamming and daily drifting chow
You know what I really like about these guys, the video's seem uncensored as fuck... Car breaks down, fuck up filming, basicly anything goes to shit, and we get to see it
You know you're early when you only have 360p.
Don't need a notification👊
The best Haggard Approved part of this video 3:30 / 4:39 glad to see you went with factory/dealer axles so you won't have to do them over in about 6-months with the aftermarket axles. Orion's choice = MINT.
You probably wasted your money on those axles because the issue is likely the inner bearing or wheel bearing. Also the axle isn't bad unless you snap it or worn a bearing out so bad it's carved into it because the universal joint is replaceable. If the bearing was bad enough to fuck up the stub shaft you can also buy the stub shaft separate for a hell of a lot less money and just replace that.
H
like x10
this truck fix video will be fun
Definitely, I bet he gives up before he even gets the hub all the way apart.
FixxxerKH202 it definitely was not a wheel bearing, it was obvious the stub shaft u-joint was shot. They could just replace the u-joints but it's probably easier for them to replace the whole axle shaft
Guys, a tip for drilling stuff out and looking after your drill bits - just put a bit of random engine oil in a little pot/cup/whatever and dip the drill in it regularly to keep it oiled up whilst drilling. Always keep your drill bits oiled/lubricated when drilling heavier metal jobs.
the problem is the ujoints on the dually, not the axel shafts
i think im not sure tho^
Zack I think since he has to take that much off as it is he just wants to do it all, I don't think those axle shafts would go out, but I mean any things possible I guess, he's just "extending" the life of the dually😂
Picked up a mint T-shirt and a HG vinyl from your website. Happy to support you guys. keep living the dream
chow is hilarious , love him
#longlivechow
THATS what i like with haggard garage! When a diesel car/truck interrupts the conversacion. I'm the same..... I should be in the channel ;) DIESEL HEAD for life!!
slam the lexus and daily it
john stone no, don't slam it
I hate how Orion stretches the ends of his words haha @ 00:55 talking about the speaker hammering on "youuuuu"
tiny dent in the quarter panel? you guys got fuckin scammed
Not a fan of the 52 wheels tbh
Snickezboy789 it's his fav wheel of all time
. Scout 😶😶 haha
Snickezboy789 they are ford explorer knock offs
did Dylan get locked up again?
Orion thanks for actually looking at the camera today, I appreciate it, keep up the good videos and I'm looking forwards to the Lexus build!
Laughed when chow starts the car and the music starts playing
that shit pimp
Keep the daily uploads coming they are really fun to watch :D
11:30 Hahaha that gesture I died!
what happened man i miss the happy medium build video im so sad ! :( its what inspired me to get a 328i cams reaction was priceless i watched it on a daily!!
Orion and chow have such a great bromance going on
Joel's Stuff only one reason Orion is bromancing Chow is everybody likes him on the channel is all about the views
Chris Maynard
I don't think so. He didn't stick with rudnik when all the viewers wanted it, and he stuck by his mate dylan when all the viewers bitched about him
Joel's Stuff I may be wrong but I think Chris left haggard and if he didn't he is much better off now imo and although Nobody like Dylan it did bring in viewers to rip into him in the comments
The best way to take off rotors with stripped/rounded off Phillips bolts; take a cutting wheel and make an "X" on the center of the Phillips bolt "NOTE: this will also cut into the rotors so if you're replacing them it's fine but if you're resurfacing rotors then be aware how much you cut" once the Phillips bolt is cut into four pieces, using with a hammer hit the back of the rotor and the rotor will push through the Phillips bolt. Hit it and turn the rotor, once the rotor is off just cut the Phillips bolt off and grind it down using a die grinder until it's flush with the hub! I do it all the time at work and it never fails.
Chow said "passss bitchess pass"
i was watching your old vids and i wish i could win the mx5 but im in Australia
Boganboi dont lose hope ma man!
thanks m8
lol i am in Austria. A good 1st gen miata is around 3000€ here lol i will never buy a 25 Year old car for that price.
in Australia there like 3000 to 9000
Its too pricey for 25 yo car
And that brake refresh is a great example of what happens every time I work on my Lexus 😂
Who buys 1200 dollar axles when u can just replace the axle joint for 50 bucks a axle. Talk about just wasting money. Even if u dk how to do them u could of take the shafts to a driveline shop and they would have rebuild them for 300-400 for both.
this nigga really bringing the Lexus back. real nigga !!!
Tiniest home town looking Ford dealership I've ever seen...flash back to the 70's
Those 52's are surely growing on me. Maybe when I get my E36 I can make moves
That LS is beautifull, hope Chow will not rice-ruin her or something
13:53 straight savage
Next video "DAN STOLE THE CHOWS LEXUS"
chow is a loko 👌👌
"Wall Tap" 😂 i died
We live in the USA 🇺🇸 "yeah the grate 48 what you gonna do?"
I thought I tasted something mint...
chow is such a great friend, lets orion know what a running lexus feels like since dan jacked his lol
Can't wait for the next one. Lexus!
You can get a gadget that plugs into a phone or Ipod that sends out on a radio frequency. You then tune the car radio to this frequency. That means you don't have to have a scanky wire in the tape player. A usb charger socket mod would be a good vid to do.
YES CHOW!!! Good to see you've got a nice VIP daily after the bulls**** that happened in your 240
I'd love to enter the Miata sweepstake so I can support you guys but I'm in the UK so I can't
Give Norfolk UK a shout out in your next video Orion 😉
52s look awesome!
Haggard should pump out 30min vids, these aren't long enough for me lol
What will chow be doing with the 240 when he gets it back?
J T he already has it back.
if i were him I'd tube chassy it or atleast the front and the trunk and daily the lex.
ewok and kb he could tube front end and rear end and fd spec cage that shat
J T should part out the suspension because that's the only thing worth a Damn and then scrap it. It's gone totalled fuck tube framing
If you do a drift VIP build, I will drive all the way up there, and I will help build it
I don't think I'll ever get over the faces Chow makes xD
That 6.0 bark sounds great, too bad it's going to blow up at any moment
The Lexus has to be a VIP daily that thing would be so MINT!
The Lexus would look dope all one color
3:55 Biggie in the Lex! ''Bulletproof glass, tints if i want some ass''
5:56 K. Dot in da house
Bring back the hockey puck suspension for this Lexus!
You said "Light highway mileage". I flipped my table.
Didn't you say the truck had new axles when you bought it?
Kyle Stevens nope they screwed him
Loving the logic bumpin
The Miata is beautiful !
chow should bag his Lexus that way you can always have an option for daily driving and stances...cool
That impact bubble on the 52 wheels lol
yeah!!! i'm happy for chow, nice car Bro!!👌
Ayyy bumping that new Kendrik ,
jimmy is the coolest guy ever haha
tell Cam Korea to get back in the game and Dylan needs to get back in the game too and do something with that 6-5
so happy for chow!
chai is so funny dude he is the comedy relief.
Where is Cam?
JWJ no... where is this vide
he is fucking around.
he's with this family back in torrington
Canada
Want to see more of that alignment
13:08 jackstand totally crushes in the rocker panel seam LMFAO they don't call it haggard for nothing hahahaha
He need some nice looking wheels and lexsus will be lit
360p life..
Hopefully you make a video of the oil change and cold air intake. keep up the work
Chow is savage. 😆
Gotta love a bit of logic and Kendrick
Chao should but some killer rims on his new whip
gotta hit that YEET
Finally tone bone actually got a truck
Orion & Chow are best friends now
Just a heads up there's an o ring, a dust/vacuum seal, and an axle seal you've got to replace when you replace those axles.
52's on the lex!
Y'all should make a white Mint. Tank 👌🏻
Axles and front breaks? Save the headache and do the front bearings, would make a good video!!
Im running ls400 calipers on my 99 gs400.. those rotors not cheap. i currently have drilled and slotted . def looking into some stock rotors. Cant want to see the hoonin !!
Where Cam and Dylan?
man having to go thru all that emission shit must suck, I dont think any of my cars would ever pass if I lived in an emissions state