Video není dostupné.
Omlouváme se.

Washer/Dryer Stacking Kit Installation W10869845

Sdílet
Vložit
  • čas přidán 7. 06. 2017
  • Buy part W10869845 now: www.repairclin...
    Tools used: 9/16" wrench, adjustable wrench, slip-joint pliers, flat head screwdriver, Phillips head screwdriver
    Buy part 426 now: www.repairclin...
    Buy part 181CB now: www.repairclin...
    This video provides step-by-step instructions for installing a stacking kit, which can be used to vertically stack a washer and dryer. Please note that you will need an assistant to lift the dryer.
    Additional dryer repair, troubleshooting tips, help with finding your model number, and part replacement videos: www.repairclin...
    All of the information in this stacking kit installation video is applicable to the following brands: Amana, Maytag, Whirlpool
    Connect With Us!
    plus.google.co...
    / repairclinic
    / repairclinic
    / repairclinic
    Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
    Check out our blog: www.DIY.RepairC...
    Don't forget to like and comment on this video, and subscribe to our channel!

Komentáře • 67

  • @AriannaAyers
    @AriannaAyers Před 4 dny

    This is my favourite channel on CZcams. My children think the channel is fascinating, and lovely as well.

  • @OwnYourOwnBus101
    @OwnYourOwnBus101 Před 4 lety +61

    Repair clinic, I get the feeling we all came to this video for the same explanation: How to hook up the washer dryer connections behind the two units in such a confined space? Could you please do a video on that? If you have one can you post it in the comments?

    • @rickf659
      @rickf659 Před 6 měsíci

      I was about to say the same thing.

  • @blessedarmadillo8257
    @blessedarmadillo8257 Před 2 lety +11

    That you, Mr Robot. Your warm, sonorous intonations have reassured me and will propel me to complete my project with great alacrity.

  • @hannagoodbar6596
    @hannagoodbar6596 Před 5 lety +33

    Missing: how to attach the dryer exhaust. You can see round flexible exhaust in the first open closet shot. Glossed right over that step.

    • @Ereaes
      @Ereaes Před 3 lety +4

      Install "according to the instruction manuals."

    • @ericwhitedude
      @ericwhitedude Před 2 lety +1

      @@Ereaes - Bwahhh hhhahh!!!

  • @salvadorhpo2030
    @salvadorhpo2030 Před 5 lety +33

    I always get hungry while doing the laundry. Please explain how to install a microwave between washer and dryer.

  • @louislaplante4838
    @louislaplante4838 Před 3 měsíci +1

    You guys make it look easy. Great job

    • @repairclinic
      @repairclinic  Před 2 měsíci

      You're welcome!
      We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
      We hope that you have a great day!

  • @jonnychingas5757
    @jonnychingas5757 Před 5 lety +8

    What about the washers water hookup and dryer exhaust and electric connections??? These appliances don't have any???

  • @leuchtag1
    @leuchtag1 Před 5 lety +43

    You should include how the exhaust vent will be SAFELY installed in your stackable inside a cabinet!!!

    • @ZeitGeist_TV
      @ZeitGeist_TV Před 5 lety

      Clyde Leuchtag Electric dryers don't need as much space as a gas dryer would. Also the most you would deal with is condensation depending on the setting you use it on.

    • @multi-wreckz712
      @multi-wreckz712 Před 5 lety +6

      Yes they do! All dryers need to have a good vent installation. Or else you will have a restriction. And a small cabinet means you won’t be able to go back there and shortened the vent.

    • @jeffcostanza6802
      @jeffcostanza6802 Před 3 lety

      When was the 1st front end motor stackable made

  • @mrsatire9475
    @mrsatire9475 Před 4 lety +11

    How did you hook up the dryer vent hose?

  • @skysoul2022
    @skysoul2022 Před 6 lety +8

    How do you remove the screws that connect the washer to the dryer if there's no space to squeeze around behind the appliances to unscrew them? That's our issue ... we can't pull the appliances out because they need to go over a piece of hardwood to come out (thus we need to pull out one appliance at a time), & we can't reach the screws to unscrew the dryer from the washer. Thank you!

    • @fan3002
      @fan3002 Před 3 lety

      Did you figure this out?

    • @skysoul2022
      @skysoul2022 Před 3 lety +4

      fan3002 We hired someone who very carefully pulled both out at once using with what little wiggle room we had to work with. He wrapped some sort of strong belt around the one on top to help pull them out. It was super challenging though.

    • @fan3002
      @fan3002 Před 3 lety +2

      @@skysoul2022 Understandable. Mine is upstairs and it has a drain pan underneath it that is plastic and I can just picture this getting broke. I knew when I bought the home it was in a bad place but I had to go with it.

  • @kellismith4329
    @kellismith4329 Před 3 lety +1

    The vent installation will be unique to it’s surrounding/positioning, youcan also reverse the swing of the dryer afterwards so they both open and close the same direction as it is inconvenient to use them that way.

  • @sethmiller6201
    @sethmiller6201 Před 2 lety +3

    Is there a video for the dryervent yet?

  • @angelsolares8801
    @angelsolares8801 Před 2 lety

    this kit can be used for a frigidaire washer and dryer, and another question this is similar to a rack to place the dryer over the washing machine

  • @ivancurtis
    @ivancurtis Před 2 lety

    Two absolute studs

  • @LilGrimey5Star
    @LilGrimey5Star Před rokem

    Where does the heat from the dryer go when it’s in use though?

  • @mattalbrecht7471
    @mattalbrecht7471 Před 6 lety +2

    But ow do you make the dryer vent, water, and discharge hose connections? i am building an enclosed washer & dryer "closet" and space will be tight, but it will meet the requirements you set for venting and stuff. how do you connect the hose and dryer vent and stuff, then scooch it back into the closet?

  • @francoisj.interiors2090
    @francoisj.interiors2090 Před 6 lety +6

    I have problems with all BOSCH products?? Unhappy with the quality at all.

  • @CMARTINEE123
    @CMARTINEE123 Před 5 lety +3

    is this for any 27" washer dryer say if you have mixed brand units?

  • @user-ql8dx2rl7x
    @user-ql8dx2rl7x Před rokem

    STEFAB STACK WASHER DRYER MODEL-STX 10
    Drum motor not running motor perfectly ok

  • @crewkittylove
    @crewkittylove Před 5 lety +4

    Would this work for a kenmore elite?

  • @justchillins1c3l46
    @justchillins1c3l46 Před 3 lety +1

    Where do you get this bracket from? I asked lowes and home depot and they dont have stacket kits like this? Id like to buy please.

  • @josebenedico7379
    @josebenedico7379 Před 6 lety +3

    How do I clean the dryer conduct? It's hard to pull out both machines at the same time out of that hole

    • @punker4Real
      @punker4Real Před 6 lety +3

      get two strong dudes from homedepo

    • @user-kf2vv4dt2k
      @user-kf2vv4dt2k Před 5 lety +1

      Wet the floor. Once the feet become wet. The whole unit will skate out

    • @NoName-zz8nl
      @NoName-zz8nl Před 3 lety

      @@user-kf2vv4dt2k 😆😂

  • @minnesotadryerventguys

    So home owners doing this.... We need access to the back of the dryer & Remember you do not want to use flex ducting on a gas dryer. Why? because it traps the lint in the crevasses, also messes with the air flow, which will cause a back up in the line and then carbon monoxide comes into the house from the air holes in the dryer, please install a CO detector in the laundry room!! Don't rely on a smoke detector in the center of the house. you need time to get out before the gases get to the center of the house. Most of us dryer cleaners see this one a week. looks pretty but really makes it difficult because doing this causes safety issues. as great as it looks... it's not safe.. your dyer has to breath as well.

  • @anthonygilmore5969
    @anthonygilmore5969 Před 2 lety

    Thank you so much for this.
    It helped me a great deal.
    Have a great day.

  • @antoniomelendez3919
    @antoniomelendez3919 Před 6 lety +2

    That was a great and simply put diy video thank you 🙏🏻👍😀

  • @sethhorst6158
    @sethhorst6158 Před 5 lety

    How do you remove it? The house I'm moving to with my family has a stacked unit installed blocking the stairways to go up and down leaving the wooden stairs outside as the only way to go upstairs an downstairs.

    • @lpsmlp4570
      @lpsmlp4570 Před 5 lety

      It's should never block the stair ways that's stupid

  • @hansenland
    @hansenland Před 6 lety +2

    Very very helpful. Thanks!

  • @LilianaMartinez-jt5mk
    @LilianaMartinez-jt5mk Před 3 lety

    just to disconnect a washing machine this place called Toronto decorating charged us $850

  • @skybuck2000
    @skybuck2000 Před 4 lety

    Always handy when there is no de-install video and manual lol.

  • @adoptedchineseboy
    @adoptedchineseboy Před 6 lety +1

    Is it possible to stack 2 washers instead of 1 washer and 1 dryer?

  • @TheCuringa123
    @TheCuringa123 Před 6 lety +1

    How do I get the stuff to put together? The ones on the video?

    • @puddgyballerina1
      @puddgyballerina1 Před 5 lety

      Contact your dryer's manufacturer if it's not in the bag you should have received when it was delivered--it should also contain the drum locking pegs

    • @erinkstaton1118
      @erinkstaton1118 Před 4 lety

      Stackable kits can be purchased separately at home improvement stores.

    • @NoName-zz8nl
      @NoName-zz8nl Před 3 lety

      In general all it is, is a mending plate

  • @jeffhardman73jh
    @jeffhardman73jh Před 4 lety

    I did not hook shit up they just put it in place

  • @Cookmozter01
    @Cookmozter01 Před 3 lety

    I need the correct measurements on everything

  • @erickmatamoros7281
    @erickmatamoros7281 Před 11 měsíci

    2:47

  • @bentcn8511
    @bentcn8511 Před 3 lety

    heavy

  • @hoperules8874
    @hoperules8874 Před 3 lety

    mmkay...no instructions on how to lift the very heavy full size without summo-wrestlers around...

  • @vdarr1
    @vdarr1 Před rokem

    Seeking stack kit for Mid # wfw93hepwo