iPad Air 2 Screen Replacement
Vložit
- čas přidán 2. 07. 2024
- A step by step Repair guide on how to repair and replace a broken/cracked/not working lcd touch screen display glass assembly on iPad Air 2.
Compatible Replacement parts - bit.ly/3EmbtUx (USA/AU/Global)
Tools
Heat Mat bit.ly/3WgsPcF
Portable Heat Gun|Stations bit.ly/44Y5NLp
Philips Screwdriver, Tweezer, Suction Cups, Pry Tool Plastic / Metal / Card bit.ly/3FB2r5a
Silicone Repair Mat bit.ly/3FKUc6K
Glue | Adhesive bit.ly/3Dw2X4C
Clamps & Essentials bit.ly/3Qvm3Qf
Guides you May Like
iPad Air 4 2020 LCD Screen Replacement • iPad Air 4 2020 LCD To...
Galaxy S10 Camera Lens Glass Replacement
• Samsung Galaxy S10 Ca...
Redmi Note 10 Pro Max Camera Replacement • Xiaomi Redmi Note 10 P...
Oneplus 7 Pro Battery Replacement • Oneplus 7 Pro | 7t Pro...
If our video was helpful, you can always support (for $1.99) us by becoming a member. A Joining Member will help us to create more variety of content for the community.
CZcams Join bit.ly/3O7X5SH
Our Partners
bit.ly/2FSFTPv ( Latest Smart Gadgets & Accessory Store )
bit.ly/2QRfYhP ( Mobile Phone Replacement Parts Store )
bit.ly/3afejcf ( Gadgets and Replacement Parts )
Timestamps
00:00 intro
00:10 Opening iPad Air 2
00:38 Removing Broken LCD Assembly
02:04 Removing home button Assembly & Bracket
02:57 Placing home button Assembly & Bracket on new screen
03:46 Installing new screen assembly
05:08 Testing and closing
Royalty free music - eoun.com
#ipadair2 #screen #ipadrepair - Jak na to + styl
Awesomeness
Thanks 🙏
Thanks Geardo for the explanation! After replacing mine, the display shows horizontal black lines right in the middle, Is there any repair possible without replacement of the part ?
No.
Why dont disconect the batery?
Bravissimo.
Thanks 🙏
I have followed the steps without disconnect the battery and some of components got damage 😒
What components you got damaged?
The clamps with the thumb screws - do you have a link to an ebay or amazon listing for those?
Your location?
@@DIYGeardo Norway. I usually get most of my stuff from china via ebay.
You do not show how to take digitiser from glass!
It is not possible in air 2. It is possible with many machines and tools. But it is worthless
hi, when I press the button it doesn't come back in relief, it could help me?
You mean the home button is stuck ?
@@DIYGeardo Yes right
@@alessiacantiani4394 Probably it got stuck, you need to remove the screen and need realigned the button. Probably an issue with metal piece too.
@@DIYGeardo do I need to put some glue between the front panel and the new home button? thanks soo much
So you don’t disconnect the power 🤣, and just use double side type would be better than glue
Thanks for your feedback. To disconnect the power needs to undo the screw on the battery connector and raise the logic board. The ideal method is to perform the repair with an anti-static pad or tablet/watch. That is the issue with most iPad devices and good pixel phones. Disconnecting the battery is not straightforward. Make sure the power is off, and i would say 99% it is fine. Some may not agree with what i am saying. If you can find an original adhesive, go for it, but using aftermarket non-genuine adhesive can create issues. So it is better to use b7000/t7000 glue. Again it comes to preference and availability.
He didn't solder back the small tab just beside to the left of the home button and he also didn't installed the camera bracket to center and prevent the camera from moving around 😐😐😐
Where to get the screen from??
Jstech.com.au