【RC DRIFT】S13 SILVIA 侍道 Rocket Bunny★解説★ how-to
Vložit
- čas přidán 14. 09. 2020
- MACKY WORKS★めっちゃ長い動画になってしもうた‼
シャーシは Yokomo YD2 SX2に ラップアップのVX-DOCK2
ボディはアディクションのパーフェクトボディシリーズ
NISSAN S13 シルビア Rocket Bunnyです。
塗装は主にShow up colorsを使用しています。
ご質問などありましたらコメント欄にどうぞ。
MACKY WORKS ★ It's been a very long video!
Chassis is Yokomo YD2 SX2 wrap up next VX-DOCK2
The body is the perfect body series of ADDICTION RC
This is NISSAN S13 SILVIA Rocket Bunny.
I mainly used "Show up colors" as the paint.
If you have any questions, please leave them in the comments.
#シルビア #ラジコン #ドリフト - Auta a dopravní prostředky
you guys are to good at this 👍
20年昔のリアル内装はロールバーを細い鉄を使うやら色々と重いイメージがありますが今の内装見る軽さを重視されていて納得しました
The red hand on the display made me laugh out loud:) it is a good hobby quality and a fun channel to watch
Thank you. My fingers are too big.(^_-)-☆
Perfect ! ... Abraço do Brasil
色んな車種に対応出来るシャーシは画期的ですね。👏👏👏
そうなんすよー😊VX DOCKいい感じっす😬👍
Very helpful walkthrough of components, I will definitely need some of these units in the future - planning a d5s new built.
Rooooo! Thank you always. Did you get the D5? That looks good. When Roooo creates the interior, it will surely be unique.(^_-)-☆
This is amazing work love the channel thanks for sharing 🙏🏾 happy drifting
Welcome to my channel. I hope it will be helpful to you.(^_-)-☆
WOW...... I´m speechless! Thanks for sharing your sectrets! Best Regards
Please refer to it and take on the challenge.(^_-)-☆
やはりマッキーさんは日本一
いや、世界一のヘムタイアーティストさんですね!!!
SAKAKI RACING WORKS 日本一とか恐縮の極みですよ。ちょっといきすぎのRC愛好家ですぅ😆
Hello ,crasy job of the body 👍,you very good
Bye next 👍🇨🇵
Thank you very much.(^_-)-☆
Found it, thank u
ロールバー自分ストローで作りました😂
そういったアイデアが楽しさですね😊
収縮チューブを曲げて作るのもオススメですょ👌
とてもためになる動画をたくさんあげて頂きありがとうございます。
いつも参考にさせて頂いてます。
質問なんですが、A-Oneのラベルシートを張った後は、さらにプライマーを吹くのでしょうか?
ベースにプライマーを吹いて食いつきをよくすることは理解できますが、フィルムへの
塗料の食いつきが気になりました。(はじかないですか?)
恐縮です。いいー質問ですねー(^^) シートの後は直接塗装です。例えば表貼りする通常のステッカーシートにもクリアやフラットクリアを吹く事がありますが問題ありません。
Show up、タミヤ缶ともテスト済です。僕はビビリなので吹いてすぐに乾く程度の希釈と吹き方しますが(^^;) 実はもうちょっと良さそうなシートをりーぽんが教えてくれたので、またテストして動画にしますね。(^_-)-☆
赤い指さし棒素敵です笑
恐縮です。指も動くようにしときます( *´艸`)
Badass😍🤙🏼
Badass ??? ('ω')ノ
Sugoi すごい😉👍🏼
赤いランボルギーニに新しいホイールを使うなら固定式ライトのディアボロが似合うと思います。
貴重なご意見ありがとうございます。昔HPIというメーカーから発売されていましたが、、、
ディアボロ、もはや入手困難ですぅ( ;∀;)
First off awesome video!! Did you build everything for the interior or did you outsource for the parts?
I made the interior myself.
would u be willing to customize bodies for people in other countries?
I love love love your work!! (and your little red hand) How do you make the 90-degree hose fittings for the silver box next to the nitrous? 16:23
Hahaha. Thank you. It's difficult to explain in words. Boil the plastic rod and bend it. Small parts such as hexagons were made from plastic boards.(^_-)-☆
@@MACKYWORKS perfect explanation!
I would like to how are you putting that design on your cars, from what I'm seeing that it looks like you're putting a translucent layer of color on first, then you paste the dragon on and next you put the dots, and after that you paint it silver on top of all that. Is that what you are doing? I really want to learn this technique so I can do this on my rc cars. It would be nice if you did a video of this process step by step on a square piece of Lexan, that would be perfect. I love your work, keep it up
watch the video bro he tells all!
Yes he does, but the English subs leave out all the important details.
I guess you need to have a bit of knowledge on building , printing, painting and kinda put 2 n 2 together between the videos and the subs , a bit of learning basic Japanese words helps, even with all the know hows, it is very difficult to pull off, especially as clean as he does !!!!!
いつも参考に見させて頂いております。YD-2だと思いますが、タミヤのTT-01で作ってもらえないでしょうか?ご検討お願い致します。
恐縮です。私のスタートはTT-01でした。しかし、誰かにあげちゃったんだよねーー(^^;) わざわざ購入するのもなーーー(^^;) そもそもドリフト向きじゃないいんだなーー(^^;)
と、いう訳で、あなたが作って私に見せてください。楽しみにしてますね(^_-)-☆
俺もタミヤのマーク2を持ってます。
このカラーリングいいなぁ
絶対自分じゃ作れないけどw
作ってもらいたいけど忙しいだろうし
シートだけあればなぁ
室内スペース空けるだけなら旧VXドックの方がコンパクトですよ~
値段も少し安いし
アッカーマン出しにくけどマッキーさんならすぐ出せると思う
大丈夫!作れますよ('ω')ノ トライ!
VXが一時期中々入手困難だったので2は発売時即買いしてました(^_-)-☆
@@MACKYWORKS 画像の拾い方分かればシート部分は何とかなりそうだけどマスキングして自分で描くのが苦手ですわ…w
ブラシはあるけど絵心ないのがネックですorz
VXドック、こっちだと大量にあるんですけどねw
ロールバーの曲げ方を動画にして欲しいです。
実車の彫刻塗装みたい‼️
マッキーさんはここまでできるのにどのくらいかかったんですか?
クールレーシングさんはスゴいGTRとヴェルファイアありますよね。CZcamsで観ました。
恐縮です。んーーーーっと、どのくらかは考えた事ない、、かな。しかもまだまだ技術向上の途中なのです。日々研究ですぅ。どのくらいか、あえて言うなら、、、、、、、300円くらい( *´艸`)
2駆ドリ欲しいなぁ
買いましょう!('ω')ノ それか、買ってもらいましょう( *´艸`)
凄い(^-^)/
質問
バンパーとか、艶消しブラックに、したい時は!
どうしたら良いですか?
宜しくお願いします。m(__)m
恐縮です。別パーツなら表側タミヤのフラットクリア。一体の形状なら艶消しの部分だけ表の保護フィルムを剥がしてフラットクリアー。です。
@@MACKYWORKS 有り難う御座います。
はぁあい