A lot more to do than that. Enter and exit with 3 points. Check parking brakes are applied, check range selector is down. Close door. All failable here in MA
Much better than the school bus instructors. This test is the same as a Parking brake test, Service brake test, and a L.A.B test. You have several different videos for each of the P.S. and L.A.B. test. I see your App has a trailer as well. Had some difficult time searching all the different video wish it was all in one video.
Love the video, only thing that I was always told different is to release the brake and ensure the system is at full pressure in the simulator it stated turn the engine off then release the brakes so I am testing at 100ish psi for air loss on a system that usually runs around 120-125 psig. Is this simulator available via a website or pay for software kind of thing.
Great video Please correct the following. Show test for air loss in 1 min. without brake Pedal applied 2psi with tractor only, 3 psi with Trailer. Show test for air loos in 1 min. with brake pedal applied loss is 3psi tractor only, 4 psi with trailer. I would also suggest start truck build air pressure to Gov cut off then release brakes and wait for initial air loss and pressure to stabilize then turn off ignition key.
Missing 4 critical components of the in cab air brakes test. NO cut in test, parking brake & service brake tests . that's an automatic fail forgetting any of these skills. They also fail to mention you must wait for air pressure to settle before engaging in the applied brake test. If you are a new student driver in a truck driving school DONT watch this video. Listen to your Instructors instead. There is a very good video for the airbrakes test by Grtruckingdemolition
I have a question regarding the air brakes test. Do I have to push in the tractor and trailer brakes (yellow and red) before doing the air leak and early warning system tests? I recently started taking lessons at a school in the Bronx, New York, where the trainer told me not to push in the brakes for those tests, only do it for the spring brakes test (pop out test). Is that true? The manual says different? I don't want to fail because of bad advise.
Omg not gonna lie this is easier to learn this than most instructors
Get saved Jesus christ is the only way please check out a pastor named Paul washer look up a sermon called the gospel
That part
I like the simulator set up and the instruction. Was searching online for one so I could practice air loss rate test and slow pressure build up rate.
Great tutorial however, before safe start check, you MUST chock the wheels! then proceed with the test
Your suppose to imagine your wheels are chocked this is just for air brakes 😂
Only chock wheels on an automatic right?
@@slickrick7148 LOL
Nah man just put it in first gear and turn off . Then do everything in accessory. Key to the left
A lot more to do than that. Enter and exit with 3 points. Check parking brakes are applied, check range selector is down. Close door. All failable here in MA
Thank you, guys, for the amazing video... I pass on my first try ....
Much better than the school bus instructors. This test is the same as a Parking brake test, Service brake test, and a L.A.B test. You have several different videos for each of the P.S. and L.A.B. test. I see your App has a trailer as well. Had some difficult time searching all the different video wish it was all in one video.
Thanks, it’s very helpful!
Thanks I learn more for this video .clearly and very well explain.
Passed my pre trip
Thanks I see I'm going to be driving faster than what then I was planning too.
This video make it so much easy .
like tutorial very easy to understand
Question where can I find this program? It's extremely helpful for studying for the test. Is it available for the play store.
You should make this a app 🏆
Is this still good to learn from ?
My book instructions is different and its automatic transmission too
LOL totally understood much better this way. Thank you. in December 2022.
So we don’t have to be in low gear ? Before the allied air leakage test?
Very helpful
Love the video, only thing that I was always told different is to release the brake and ensure the system is at full pressure in the simulator it stated turn the engine off then release the brakes so I am testing at 100ish psi for air loss on a system that usually runs around 120-125 psig. Is this simulator available via a website or pay for software kind of thing.
Do you have a simulation for a class b automatic dump truck?? Could really use it.
cool
Great video thankss 🤘 easy way to understand
❤️
Mr. George 😢
❤❤❤❤❤❤❤❤
Guys, thanks for great effort 👍👏
tircimisin baskan
Great videos, I have a question , where can i find the simulation software like this? Thanks
Tudo Posso em Cristo it’s for sale on their website
👍
Very good thanks.
How truck drivers do
very good video
Ummmmm, Level ground, Wheel blocks?
this is only half the test
If the truck turn on just go.
Great video Please correct the following.
Show test for air loss in 1 min. without brake Pedal applied 2psi with tractor only, 3 psi with Trailer.
Show test for air loos in 1 min. with brake pedal applied loss is 3psi tractor only, 4 psi with trailer.
I would also suggest start truck build air pressure to Gov cut off then release brakes and wait for initial air loss and pressure to stabilize then turn off ignition key.
Thanks
Missing 4 critical components of the in cab air brakes test. NO cut in test, parking brake & service brake tests . that's an automatic fail forgetting any of these skills. They also fail to mention you must wait for air pressure to settle before engaging in the applied brake test. If you are a new student driver in a truck driving school DONT watch this video. Listen to your Instructors instead. There is a very good video for the airbrakes test by Grtruckingdemolition
I have a question regarding the air brakes test. Do I have to push in the tractor and trailer brakes (yellow and red) before doing the air leak and early warning system tests?
I recently started taking lessons at a school in the Bronx, New York, where the trainer told me not to push in the brakes for those tests, only do it for the spring brakes test (pop out test). Is that true? The manual says different? I don't want to fail because of bad advise.
Forgot cut in test