Install Kufatec Sound Booster 2016 Audi SQ5 Plus Integrated Solutions

Sdílet
Vložit
  • čas přidán 9. 05. 2016
  • Not that you’re finished installing your Kufatec Sound Booster Pro you can go from this…
    Standard tone - 00:04
    To this…
    Custom tone - 00:11
    With the touch of a button.
    Welcome to the integrated solutions video series brought to you by Autofidelity and hosted by Terence Toh.
    Hi, I’m Terence Toh, and welcome to this episode of Integrated Solutions.
    We have already done a few videos for the Kufatec Sound Booster where we demonstrate the product and do some sound comparisons. If you haven’t seen those videos already, it might be a good idea to check them out to find out more about this great product.
    In this video we will give you a quick guide to install The Sound Booster Pro into a 2016 Audi SQ5 plus. We will be using Kufatec item number 40180, which is also Compatible with A6 and A7 4G models fitted with 3.0 litre TDI Bi-Turbo diesel engines. For more information, you can check out kufatec.com.au or on our website at autofidelity.com.au.
    The Kufatec Sound Booster module will mount in the boot, and connections for this product are plug and play.
    So to give you a step by step guide to remove the paneling, mount and install the module and then put everything back together.
    Removing the paneling - 01:28
    Tools for the installation - 01:49
    Disassembly Process - 02:22
    Installation Process - 04:44
    Reassembly Process - 9:38
    As we said we are not technically installing a button to this particular car but this is just an example of exactly where it would go. Here’s one we prepared earlier and this is how we would normally put if we are putting a button here. And that’s what it would look like.
    Not that you’re finished installing your Kufatec Sound Booster Pro you can go from this…
    Standard tone - 10:30
    To this…
    Custom tone - 10:37
    With the touch of a button.
    If you’ve enjoyed this video and you like us to do more of them, track us down on facebook and give us a like there or subscribe to our youtube channel, or otherwise just get a contact with us.
    Thanks for watching and have a great day.
    Bloopers - 11:04
    MORE INFORMATION:
    For enquiries and bookings, please visit our contact page at: autofidelity.com.au/contact-us/
    Also check out our:
    FACEBOOK PAGE: - autofidelity...
    SOLUTIONS PAGE: - autofidelity.com.au/solutions/
    NEWS PAGE: - autofidelity.com.au/news/
    CZcams VIDEOS: - / @autofidelityau
    Autofidelity is located at 26-28 Kilpa Road Moorabbin, Victoria Australia 3189, please click this link to access directions: www.google.com.ph/maps/place/...
  • Auta a dopravní prostředky

Komentáře • 20

  • @thehevo3978
    @thehevo3978 Před 7 lety

    hey,
    do you have a perfect setting for the SQ5 in the kufutec software ?
    It would be nice if you could send e a picture.
    Thanks

  • @rossungar3504
    @rossungar3504 Před 6 lety +1

    Hi, I noticed you had an interesting cargo net attached to the trunk cover. Where is that from?

  • @adrianlumina22a84
    @adrianlumina22a84 Před 2 lety

    Good evening, can you please tell me what is the colour for can bus low and can bus high for Audi a6 c7 2012 3.0 TDI 204 hp, 150kw. I need this for tapping in the can bus for a sound booster in the trunk. Kind regards

  • @MiistarAddil
    @MiistarAddil Před 3 lety

    What do you suggest for an Audi A6 C7 MMI is 3G

  • @davidm9317
    @davidm9317 Před 11 měsíci

    Is this same process for the 2018 Q7

  • @chris8880
    @chris8880 Před 7 lety +1

    Hey there
    Have you been able to do that with a 2011 Q7 4.2 TDI? How does the muffler change the sound?

    • @autofidelityau
      @autofidelityau  Před 7 lety

      Hi Chris,
      For enquiries please email us at solutions@autofidelity.com so that we can attend you better.
      Thank you.
      Regards,
      Team Autofidelity

    • @martinlang9615
      @martinlang9615 Před 6 lety

      Chris, I have owned a 2008 Audi Q7 V8 4.2 TDi for 5 years. I replaced the huge "boat anchor" east/west combined muffler which has two pipes in and two pipes out. The muffler mechanic/owner was able to squeeze in two stainless steel resonators and associated stainless steel mandrel bends. He showed me the completed job on the hoist...it was tight, but it worked, worked very well with a burble that would not quite compete with the Harley Davidson! When I want loud, I just flex my toe, certainly a nice sound when towing the caravan. It has increased my acceleration, up to 1 litre per hundred improvement in fuel economy. I think it cost about $600 cash...I must be close to having saved this.
      Hope this helps.

  • @darrenhaigh4613
    @darrenhaigh4613 Před 2 lety

    It will blow the speaker in the exhaust

  • @MegaArchiebald
    @MegaArchiebald Před 6 lety +3

    Disconnected mine after 4 days. Got a bit annoying. Can’t beat the original Audi sound with any of the settings. Bit disappointed. Anyone want to buy a cheap sound booster?

    • @pacman4061
      @pacman4061 Před 6 lety +1

      Yes do you still have it?

    • @MegaArchiebald
      @MegaArchiebald Před 6 lety

      Mohammad Uddin still do. Willing to get rid of it.

    • @dotyves5769
      @dotyves5769 Před 6 lety

      What do you mean with annoying? Just thought about getting a sound booster to make it a bit louder

    • @MegaArchiebald
      @MegaArchiebald Před 6 lety +1

      Yves Luethi sounds louder. But makes this stupid fake revving noise when you start the car. The original sound is much better than any of the settings. Settings 5 and 6 are louder, but sound really fake.

    • @dotyves5769
      @dotyves5769 Před 6 lety

      Mega Archiebald Cheers mate!