IMZZ ELITE | De Pin Common Harley Davidson Wiring Connectors Easily!
Vložit
- čas přidán 13. 04. 2023
- Imzz Elite | How to properly de-pin your Harley wiring connectors easily.
Follow along as Joey shows you how to properly de-pin your handlebar wiring connections. - Auta a dopravní prostředky
Very well done video, covered a very wide variety which is also very helpful! Thank you for taking the time it took putting this tutorial together, sharing it with nephews, friends who work on their own scooters. Stay safe brother!
Thanks so much for the positive feedback Rusty! Really happy we could help you out with this.
GREAT VIDEO! On the last connector you showed, with that white colored locking block, you don’t actually have to remove it all the way I found out. You just pop it up the same direction as if you were taking it out like 1/4”-3/8” and it will stop. Then you take a very small pick (I used a leather saddle stitching needle in a pin vise as a tool) and you just insert it into those little holes in the white locking block next to each pin and pull the wire right out. It’s super satisfying to do once you figure them out haha.
Great video brother I wish everybody knew how to do that anstead of cut wires and taping thanks for sharing that with us
Anytime bro
Excellent. I sure hope people see this video first and not those others that have you using a needle and going into the front of the CanBus connector. While that other method works - it is much more cumbersome. Your process works perfectly!!
Great video man. Bought some factory Harley front blinkers for my 2021 Road glide, and the damn cables from the light don’t come from the factory with the connector attached. Harley makes you buy it, and additional pins separately. Fuggin shit practice. This will help with my installation. Thanks a million! 🙋🏻♂️
Many thanks, I could have stayed a year to figure out how these connectors disassembled.
WoW!! Too bad the dealership techs don’t do this Yes I know they have to complete a job But a few minutes longer for a neater job You have instead a bunch taped wires!!
Thanks for the information
No problem bro.Glad to help 🤙🏽
Well done sir. Thank you for this vid, changing out my wife's 09 Rocker handlebars from Bitchin Rich (BSC) proved to be a little harder than I thought it would be. The connection that had a little trouble with was the last one. Thank you for saving me from having a giant wad of butt conns.
I’m glad you were able to get some real world use out of the video. 🙏🏽🤙🏽
THANK YOU SOO MUCH!! I've been trying to "un-f**K" my 07 FLHX handle bar replacement that happened before I bought the bike. You made the job insanely easy!
Happy to help man. 🤙🏽🤘🏽
OMG thank you for this video, i was about ready to start cutting wires
No problem! Glad we could help
Aren’t some of those AMP Multi-Lock I had trouble finding the 4 wire connectors. Seems HD went away from them I need to figure out the 4 wire connector that has the blue seal and used for 22FXLRST Speedo to a 22 FXLRS
Thanks brother. I am going to replace the Nacelle on my bike, and was wondering how to get the wires out of the headlight assy without cutting.
Good stuff very helpful I appreciate the info!!!
Thanks for the feedback! Glad we could help you.
Any tips on getting the pins out of the throttle wire connector? You did an awesome job explaining the heated grip ones but I can’t seem to get the throttle wire connector off
Great Video!!!! Very detailed. Thanks much.
Thanks so much for watching!
Wow! Been fng around for a year trying to unpin those JAE (CAN-Bus) connectors. All other videos show using a safety pin from the opposite side. It does eventually work but is a PITA at best. The method you show here is essentially foolproof. Thank you.
Quick question: did you make/modify that tool or buy it? I got a different tool to work but yours looks better.
That 4-pin connector @6:49, all other videos show the tool going in to the other end. Your way might be alot easier.
Awesome video thx brother
Glad you found it helpful!
Great video. Looking around for the 4pin headlight connector...👀👀👀
Bro tell me if you find em I can't find em anywhere
@joshuamullins9971 I didn't find a video but I figured it out myself
I wonder where to buy that pin removal tool showing in the video
Me too dude. Come on share bro!
Why did you skip the twist sensor plug?
10:45 Thanks!
Anytime bro
thanks great vid. Cut wires is total fail
Get rid of the cigarette ,it would be a whole lot easier
LOL thanks for the tip!
Beat it nerd!