Paano gumawa ng PVC Rodela pang Palitada
Vložit
- čas přidán 4. 01. 2021
- DIY Paano Gumawa ng Rodela gamit ang mga recycle materials
#diy #construction #skills #builder #rodela #palitada
If you're a DIY enthusiast, you know that having the right tools is essential to getting the job done right. One tool that is often used in home improvement projects is a plastering trowel. However, if you don't want to spend money on a new one or have difficulty finding one that meets your needs, you can make your own using scrap PVC.
Why Use PVC to Make a Plastering Trowel Tool?
PVC, or polyvinyl chloride, is a type of plastic that is lightweight, durable, and easy to work with. It's also readily available in many hardware and home improvement stores, as well as from construction sites as scrap material. By using scrap PVC to make your plastering trowel tool, you can save money and reduce waste.
Materials Needed
To make a plastering trowel tool from scrap PVC, you'll need the following materials:
Scrap PVC pipe or sheet
Heat gun or stove
Scissors or a saw
Sandpaper
Ruler or measuring tape
Steps to Make a DIY Plastering Trowel Tool
Follow these steps to make your own plastering trowel tool from scrap PVC:
Cut the PVC: Use scissors or a saw to cut a piece of scrap PVC to the size and shape you want for your trowel. The size will depend on the job you are doing, but a good starting point is around 12 inches long and 4 inches wide.
Heat the PVC: Heat the PVC with a heat gun or by holding it over a stove flame. Be careful not to overheat it, as this can cause it to melt or become brittle.
Shape the PVC: While the PVC is still warm and pliable, use your hands to bend and shape it into the desired trowel shape. Use a ruler or measuring tape to make sure the edges are straight and even.
Smooth the Edges: Use sandpaper to smooth the edges of the PVC trowel. This will ensure that it won't scratch or damage the surface you are plastering.
Test the Trowel: Test the trowel by using it to apply plaster to a small area. Make sure it feels comfortable in your hand and that it's the right size for the job.
Conclusion
In conclusion, making a plastering trowel tool from scrap PVC is a simple and cost-effective solution for DIY enthusiasts. With just a few basic tools and some scrap material, you can create a trowel that is the perfect size and shape for your project. Plus, by using PVC, you are reducing waste and helping the environment. So, next time you need a plastering trowel tool, consider making one yourself from scrap PVC.
Step by step kung paano gumawa ng rodela na may rubber pang palitada o plastering trowel rodela rubber. Ang rodela na may rubber ay pangunahing gamit ng mga mason sa pag papalitada ng pader at pagpapakinis nito or pagbubully. Ang mga pangunahing materyales ay ang mga sumusunod: scrap na pvc pipe (3" or 4" size), scrap na rubber float, contact cement (rugby), screws, stripping knife, lagaring bakal, screw driver, hand drill at fire. Makikita ang sa video ang proseso sa paggamit ng apoy upang palambutin ang pvc pipe para gawaing flat ito. Makikita din sa video ang ibat ibang technique o pamamaraan sa paggawa ng rodela na may rubber upang mas maging matibay at tumagal habang ginagamit ito sa pag papalitada. At sana ay nakatulong itong kaalaman na ito upang makagawa ng sariling gamit pang palitada at makatipid sa pag bili ng mga gamit sa pagmamason o pag sesemento. Please like, share, subscribe and ring the bell for upcoming video update! Maraming salamat mga KaDesign!
#palitada #diyconstruction #HomeDIY
Handmade DIY Tools - • DIY Tools: Tile Settin...
Paano Gumawa ng Rodela with Rubber - • Paano gumawa ng PVC Ro...
Paano Gumawa ng Concrete Hamba Moldura Pattern - • Paano Gumawa Concrete ...
Paano Magbato ng Halo ng Palitada (Techniques) - • How to Plaster Walls w...
Mga Gamit sa Palitada - • Palitada Tools: Iba't ...
Paano Magkabit ng Moldura ng Bintana - • Moldura Cement Precast...
Paano Gumawa ng Pattern ng Moldura (Yero) - • DIY Making Cement Moul...
Paano Mag Kanto ng Palitada sa Pader at Bintana - • Plastering Window Corn...
Paano Mag Palitada (Step by Step Tutorial) - • Paano mag PALITADA ng ...
Paano Gumawa ng Window Grills (Tubular) - • Welding Tutorial Windo...
Paano Gawin ang Moldura (Bintana) ng Mano Mano - • Paano Gumawa ng Moldur...
Paano Magpahid ng Skimcoat - • How to Apply Skim Coat...
Paano Magkabit ng Precast na Moldura (Step by Step) - • How to Make a Beautifu...
Paano Magkabit ng Tiles (Tiles Setting) - • How to Tile Settings D...
Paano Gumawa ng Precast na Moldura - • DIY Concrete Project |... - Jak na to + styl
Masonry Work, Cement and Sand, Plastering Job Playlists 👇👇👇
bit.ly/CementWorksDIY
Order aku sir
Good job
salamat po!
Magandang diskarte bro
Ayos yan ser makatulong sa mga mason ntin
Salamat sir sa pagbahagi mo at sa mga tips malaking tulong Yan at kapakipakinabang👌👍
Diy maganda na nakatipid ka pa ok na diskarte boss
Woow I'd galing nyo po
galing wow✌️✌️✌️
Ang galing mo Boss may maganda na akong halimbawa na galing sa yo. Nakadetalye lahat na ginawa mo. Maraming salamat Boss.
Ayos na ayos boss
Galing...may natutunan nanaman ako..salamat bossing...😊🥰
Ayos tol good idea salamat po
Galing nman idol
Galing naman gumawa idol
talentado talaga tayung mga pinoy
salamat boss 👍
Salamat sa idea boss, pwdeng pagkakitaan yan
salamat sa support sa channel
very helpful in the world of carpentry. enthusiasm and success
salamat boss nakita ko rin kung paanu
salamat sa idea tol
salamat sa panonood pls subs
Galing..mahusay..no comments..
Ang galing naman lodi gagawa rin ako niyan bagong kaibigan nga pala lodi sending support idol alam na.
salamat sa panonood. lam ko na this
Ang galing mo idol parang gusto ko naring gumawa
Salamat po sa panonood. Happy New year po!
Idol tipid moment,,, gud job, ty, 👍🏻👍🏻👍🏻🙏🙏🙏😅
salamat sa panonood pls subscribe po thanks!
Galing mo boss..
Galing
bro. Anong chapter mo? Ako so Bobby taga Alpha Chapter.
Pa shout out Naman dyan idol
Thank you lods sa diskarti galing mo..
Wow 😮 galing naman ng idea mo boss,laking tipid mo nyan Sa badget na gamit Mo Sa masonry tool.good job boss..
salamat po sa pnonood
New friend Full support and GODBLESS.
Simpleng paliwanag madaling maunawaan thank you very much.
Salamat KaDesign @pedro silvestre sa panonood!
Very creative... DIY👍👌
Salamat po marami po akung natutunan
Salamat po KaDesign sa panonood! Happy new year po!
Brod ok na idea yan...
Kuya ok ka nai share mo sa Amin Ang pag gawa ng rodela God bless you
Galing mo boss sana maka bili ako ng mga gawa mo na yan
Daghan salamat meg sa imo pag tudlo sa pagubra ng redela na rubber god 🙏 bless meg
Thank you so much kadesign! Pls subscribe!
Nice one bossing angaling ganun pla yun salamat poh may Ntutunan ako sa video nio poh tuloy nio lng yan bossing
thank you sir good idea
.watching from Alaminos City Pangasinan God bless po.
Tol ayos Yan may natutuhan kami LFS SARABAKABA AA
CABABATUAN CITY
GAMMA ETA
Salamat Tol! Muntinlupa omicron! Viva SARABA!
@@AmazingHomeDIY viva saraba
Ayos ka design basta pinoy madiskarte dahil jan tamsak na ako at bago mo na rin katropa antayin kita God bless 😊
Wow ganda naman ng kichen L type
Thanks sa pag share ng knowledge mo.
salamat sir na e share mo ang kaalaman mo god bless you
Salamat po sa panood pls subscribe
I shout out mu nmn ako idol ... Saka ... Poh ... Marami napoh akung Alam ... Nasama naren at nakipagtapos sa ibat ibang contracts ... Kaya kunareng humawak ng mga tao ... Ka design papanu ko kokontrata ng sarili ko Kung mahiyain ako ...
Idol gusto Kung Makita Kung papaano mag overhead tiles ... I babase kulang Kung Tama ba Yung ginagawa koh ... Baka kase kumapak Yung gawa koh ka design
Bro...labis ako natutuwa sa share mo...malaking tulong para sa amin ito....tnx...bro...
Salamat kasi mayron ako'ng natutunan kung paano gumawa ng rodela...
salamat sa Dios ka design ingatan ka sana palagi ng Dios at ng buong pamilya mo interesting
salamat po kadesign...
Mantap...👍
Grats sir. Pinoy na pinoy ang dating sa pag gawa mo sir. Grats. Ulit
Ayos ka design. Hindi naku bibili gagawa nalang ako salamat sa idea idol. 👍 pa shout at sa next video mo ka design
Noted KaDesign!
Nice
Thanks!
kadesign ok yan gawa mo very good idea para sa ating kapwa worker talagang napagaan ng arive mo salamat
malaking tulong ito sa mga nagtatrabaho sa construction Kapatid,, maraming salamat sa pag share ng iyong kaalaman
Maraming salamat din kapatid!
Salamat sa Tutorial mo Brother may natutunanan ako.
Your welcome kadesign! salamat po sa pagsubaybay. God bless pls. subscribe po 🙂
salamat bossing, may natutunan ako
Thank you for sharing your good works and idea Sir, mabuhay ka and God bless...
thank you for watching
galing mo boss gumawa ng rodela.
salamat ser
Thank you sir sa natutunan ko sa iyo. Malaking bagay po ito para sa akin. 🎉❤🎉
salamat sa panonood
Maraming salamat sayo ginoo, may natutunan nananaman ako. Isa po akong senior citizen mahilig po akong maggawa- gawa ng mga bagay bagay na taliwas sa dapat kong kahumalingan gagawa po ako niyan kasi ako ang mason sa amin. Babae po ako 67 year old na po ako.
maraming salamat po. God bless you!
Hanga ako sa iyo Mam!
Nice info...makakatipid ang Mason sa product mo good idea
Great 👍
Thanks for the visit
ang galing mo naman...
salamat kaibigan
Ok nice idea!
Basta membro ng Samahang Regal Babies ay ma diskarte at maparaan sa buhay!,.No 3 of the 12 jewels of the Scout law!,....keep up the good work bro!,.mwab!,..👍👍👍
lfs tol 💪
Amazing! Good job.....👍🤗
Nice po
Puro mga pang bintana nmn na gamit idol salamat
Noted po KaDesign!
Good idea. Thanks for sharing ..
Ok, magaling po step by step na pagpapaliwanag ninyo. Salamat at more power.
salamat kaibigan
Okay bro maganda
Bagong kaalaman..salamat sa pagshare. Happy new year po😊
Salamat din po boss!
OK NICE work.
Nice tol lfs
Galling nmn.. Bagong taga subaybay idol
Galing mo po kuya
salamat sa pag appreciate sa video, pls subscribe po salamat 👍
Full support idol
ok sir no problem dalaw ako sa mansion mo
Maraming salamat po sa pagshare katisay..sending full support at pa shout out naman po nextvlog..
Nice work galing talaga ng mga pinoy very creative sa lahat ng bagay.. keep up the good work👍👍👍
Salamat po, pls subscribe po
galing
Very good
Good job brod, LFS...
Andali nating ma22 s actuwal na paraan dito!
Ayos idol
salamat sir
Galing bro slmat sa idea
Galing po boss
Salamat din po boss!
Very helpful po lectures 😊
salamat mam 👍
Ayos ah,,
Ok bro
Ang galing mo idol
Salamat Kadesign! Pls subscribe!
Bro pede ba mag order sayo ng pang moldura yung PVC
Que fie lo que iso una plancha de.plastico para que sirve gracias Dios Los bendiga
gagayahin ko yan idol
salamat lodi sa panonood!!!
The best
salamat ser
Ok yan idol.
Maka gawa nga din thanks sa video idol!godbless
💖
Ano pong clasing rubber at Saan bibilhin
Galing broder lfs from sigma iota chapter pagadian city
LFS BRO, VIVA SARABA!
Ok ang gawa mo na rodela matibay yan bro, dinalaw kona video mo full support for you stay connected Godbless you always
Magkano po yan
Good job brod ⚜️⚜️⚜️