I took apart my machine to get thread unstuck and for the life of me couldn't remember how to get it back together being someone who rarely uses my machine. So thank you so much for this video!
You’re the third video I tried when attempting to figure out how to put this housing back together and yours is the ONLY one out of the three that explained everything in detail and put your camera at an appropriate angle!! Thank you!
thank you!!!!!! i’m in the middle of sewing masks for hospitals, friends and families during covid and my Singer jammed completely a few minutes ago.Devastation!!!! Can’t take the machine to a repair center as everything is still shut down here in new jersey - oh no!!! But i thought, “maybe some handy person put a tutorial on line to help some desperate stranger”. And i found you, randy, my absolute savior. Not only was the video easy to understand, your instructions worked!!!!!! Thank you for helping a complete stranger this morning.
Thank you Ray, I was in the middle of making masks and my bobbin casing fell out and I was ready to order a new machine. Your video was a great help and you explained the process very precisely.
Amazing! Had a piece of thread super stuck and my Singer was completely jammed. I'm new to sewing and I had no idea how to get the string unstuck. You saved me from returning this machine :)
You are such a sweetheart for showing us how to put that back together. I tried for 20 minutes to fix this before I looked on CZcams. Thank you so much!!
Thanks. I have the instructions but I think they are horribly written. I thought I had a choice between the bottom bobbin or the top. I thread it at the top, but it doesn’t sew, now, you’re saying both has to be threaded. Where do I put the thread through from the bottom? It’s hard for me to believe they go through the same needle…The hole is so small, I had to use high powered microscopes glasses to put the tread through…it looks impossible to put two threads in that tiny hole….thanks for your help.
@@brownr749 I laughed at your description of how you think the top and bottom threads go together. In case your wondering, find a Y T video How a sewing machine works. It is a short video that shows pictures of what goes on with both threads and how they meet in middle and form a stitch. I would also suggest to get self a manual. Google it, there are even free copies of manuals for most machines. Still laughing.
When you have thread on the bobbin and pulled out about 3 inches put it in the bobbin holder. make sure you have the thread on the top threaded through the needle. turn the wheel towards you slowly and the bobbin thread will come up through the hole by itself
Thank you so much for posting this! It is quick, clear and concise - something to refer back to if confusion sets in! I appreciate that you use the correct terms for the parts.
Thank you so much for this!! I bought my machine second-hand and have never seen one with this type of mechanism in any machines I've used before -- this video was a lifesaver!
I just picked up sewing with a machine this year. I used to do it by hand for patches and things like pocket repairs, but I needed to fix my husbands pants. It’s been about 6 months; and I don’t use my machine much. It’s a Singer M2100. Today I had a massive jam up, and I moved one of the clips by accident and the whole unit fell apart. I panicked. Then I found this video and now my machine works again! Yay! Thank you for this video. It’s amazingly helpful to newbies like me!
I was about to take my sewing machine to the thrift store and purchase a new one. I was so frustrated trying to put the bobbin case back together I have always used machines with drop in bobbins. After watching your video it was quite clear what I was doing wrong. Thank you so very much for a great video. I greatly appreciate it👍
This was just brilliant. Mum had been trying to put her machine back together for ages without success but once I found this I managed to get it all up and running within minutes. Thank you!
THANK YOU SO MUCH! I've looked at 10+ videos to try to figure out my problem and at first I thought it was a timing issue but after watching this one and dissembling the shuttle hook, I found out that I had teeny tiny threads stuck inside!! I was so afraid to dissemble the hook but your video made it so easy and simple. After I cleaned out everything, I could start to sew again!!!! Life saver!! I've only had the machine for 2 days and I'm a first time sewing machine user and I thought my journey was going to end before I could even start....so thank you so much!! This was super helpful!!!
Oh my word! The needle got stuck down in the bobbin mechanism thing. I had to take the machine apart to get it unstuck and then I couldn't remember how to get it back together. I found your video on CZcams and what a blessing that was. In no time at the bobbin mechanism holder thingy was all put back together and working just. Thank you thank you thank for your video. God bless you!
I spent half an hour trying to figure out how to put this back together. Yours was the first video that came up and I was able to fix it on the first try! I didn't have the needle to the highest point. Thank you so much!
Having seen more than ten videos this one was the only useful. I was at the point to give up everything when finally I found your video and I was able to 'repair' my sawing machine within some minutes. Thank you very much!
You are the man! I have been unable to use my machine for months! I had an alteration that I absolutely couldn’t avoid and hand stitching on this fabric, no matter how meticulous, would look awful. I gave up and decided I had to try to look for a CZcams video. I’ll still need to get some oil next time I’m in the city but for now my bobbin casing is in one piece again
When I put my shuttle back in place and with the shuttle race in place and the leavers in place, it is so loose! It falls apart. If I can get it to stay when I try to sew I get horrible thread bunching and then the assembly just falls apart. Whats wrong?
Thank you so much!!! Just the video I needed to "Solve the Puzzle". I loaned out my machine and when it came back they had "Solved the Puzzle" incorrectly. Great Video!!! Now I can do the Christmas sewing I had planned. You are a blessing to me at this Christmas season.
Thank you! My husband found a Japanese Class 15, all metal, probably from the 60s at a thrift store for $45 with cabinet. Although the machine looked pretty clean, the handwheel clutch was frozen and everything was tight. Cleaned and oiled the machine. The last thing was a thorough cleaning and oiling of the bobbin assembly. I really meant to keep it in order, but it just fell out. Your video was a lifesaver!
Mr. Randy you have saved me!! I’m using a friend’s machine and I was so worried I wouldn’t be able to put the bobbin back together! Thank you so much!!!
Another year later and I couldn't find this video because I was searching for " BOBBIN ASSEMBLY." A lot of us don't know what things are really called. Lol ❤ Thank you very much. Found another video called "Help my sewing machine hook fell out" by Sews-A-lot , CZcams channel. Appreciate you both so much !❤
Being a "sometime sewer" you gave me the confidence to open up my bobbin assembly. Thank You! Like a million other people I'm trying to sew face masks.
Wow, I'm so happy that if you were around I'd give you the biggest hug!! I have been trying for hours to get this thing assembled! The instruction booklet doesn't even come close to showing this! Thank you!
You are a life saver!! I have an old Dial and Sew cabinet sewing machine and I’ve never had the housing fall out before so when it did I had no idea how to put it back in until I watched your video.
What a champion! Thanks so much. My machine sat in the cupboard for 4 months because I was so frustrated with it. Your video helped me fix it in 10 minutes!!!
THANK YOU SO MUCH!!! I was sewing a shirt for my sister when my needle got jammed and I freaked out because I didn't know how to fix it so I took it apart and got the needle out but couldn't figure out how to fix it. YOU MADE MY DAY, THANK YOU!!!
Thank you, Randy. I have not sewn with a sewing machine since 8th grade Home Ec. - Lets just say the 70's sound good right about now. I truly appreciate this tutorial, you are a lifesaver!
This video was soooo helpful. I was making cushions after not using the machine for at least 10 years, the shuttle fell out and your video was so clear, I was able to fix it myself. Thank you so much!!!
My son actually pushed this silver button and that moved the mechanism so I could put that stupid ring back in haha All happened while I was watching your video! Thankyou!
Thank you very much for posting this! Before I saw this video, I couldn't figure out how to put the thingamajiggy back together, after taking it apart, to remove a piece of thread stuck in the machine. You are a lifesaver!
Thank you. I was really stuck in a bind this morning when I noticed my bobbin casing fell apart even after use last night. This saved me today. Thank you thank you thank you!!!
Thank you so much for posting this, I simply couldn’t get my Janome back together after a thread blow out. These instructions helped me in a matter of seconds 🙌
@@randyyoursewingmachineman9954 I'm able to make new born baby clothes into a shirts/sweaters for my Chihuahua. It's been years leaving the machine and you preformed the solution!
Thank you thank you. You are a star. When it fell apart I was aghast but I remembered watching videos when I purchased my Janome 423s. I will always turn to you in trouble.xxx
Only my word, thank you! I was cleaning this old machine I was gifted and took the bobbin out. The whole thing fell out! I’ve been fiddling with it for days now. It finally occurred to me to check CZcams. Watched several different videos that were no help at all. Then I found yours. You are an angel! It finally went in! Thank you, thank you, thank you.
What a nice video, excellent demo, thank you, Randy! I have a Viking Husqvarna 6030 vintage machine I took apart for cleaning. Reassembly is a challenge. More complex than putting together an airplane. We sorely need videos on the vintage Viking machines. Please consider it. This Kenmore is so cleverly designed, and far less work to clean out. Very nice.
I appreciate your kind comments. Unfortunately, I’ve never been much of a Viking fan. There’s too many reasons why, to enumerate here. I’m the biggest fan ever of classic Singers, Kenmores, and random Japanese made machines. Those machines keep me as busy as I can be. Sorry about that. 😎👍🏼
🙌🏽🙌🏽🙌🏽🙌🏽 Thankyou so much!!! I’m literally SWEATING over here because I’ve broken three needles trying to do this on my own!!! Your tutorial saved my sanity!!!!! I love you!!!!
I don't know how many times in my 60+yrs. of sewing I have taken this bobbin assembly out and every time I must think and think about how to get it all back together. Now I have your video and my manual, you explain so much better than the manual does. Thank you, thank you.
You’re welcome. That’s why I made the video. Many of my customers would call me and I would take them through the reassemble process as I drove to a service call. Now, they can just look it up and everything is good. Thanks for watching and commenting. 😎
You are a wonderful human being!! I got some thread stuck in my bobbin assembly and when I went to disassemble it, the whole thing fell apart before I could see how it went together in the first place. The manual was absolutely no help at all. Thank you again!
Thank you from the very bottom of my heart. I’m new to sewing. Yeah, my machine “locked up” like the hands of God were holding that bad boy together. Then it fell apart once I got the string out and I couldn’t figure out how to get all the lovely metal guts back together. You sir are a gentleman and a scholar. Thanks again.
Much gratitude to you sir. I have a Euro-Pro X sewing machine that was given to me as a wedding gift 16 years ago. There are occasions when glitches occur, and I simply need a straight-forward tutorial, instead of getting overly frustrated trying to problem solve on my own. THANK YOU for being concise, having a focused camera, and not obstructing anything.
Thank you so much for the video. I’m new to sewing and I couldn’t explain to anyone what was happening or what the parts were. You explained it and I fixed it.
Thanks so much for this video. Undone little black tabs, and whole lot fell out! Couldn’t for the life of me work out how to get it all back. You are a lifesaver! New subscriber Thanks, and greetings from UK
I'm new to sewing and accidentally disassembled the hook race unit. I was working on getting it back together for 30+ minutes and couldn't figure it out. This video was a LIFE SAVER. Thank you!!!!
Great video. I did it!!! Now I can finish my project. Instead of trying to figure it out on my own, I could have save an hour and just jumped to your video. And when you mentioned about the oil and black thread... you were spot, so I put a bit of oil in there while I was at it!
you are a lifesaver! this was exactly what I was looking for. it feels good knowing how my machine works so I won't feel stuck when something goes wrong. thank you
Brilliant, I bought a machine off ebay, after discovering I'd bought a machine without a presser foot.. Feeling cheese off, I thought I'd give it a defluff etc.. And yeh you guessed it.. Fiddled about for 2hrs ++ with the casing then found your vid, thanks a million you made that so easy 👍👍👍
Thank YOU so-much Sir. I’ve spent the last hour trying to figure this out on a Bernette 705. Thanks to you, my new thrift store find now works just fine!!! The ‘Sew must go on’!
Randy, Thanks so much for being here for us..I can't believe how much time I spent trying to puzzle together replacing my Domestic sewing machine bobbin which locked up then fell out. Only two parts but I could not put it back together! Now, I will work on tension problems, I hope that is as easy as you made this tutorial. Easy to follow calm and correct...
Thank you!! Knotted thread, I instinctively took it apart and couldn’t for the life of me figure out how to reassemble the bobbin casing! I had my machine running by the time the video was finished. No superfluous chat, just the info I needed. Thanks again, Carole
I decided to unbox my new sewing machine (new to sewing too!) and inadvertly lowered the arms not knowing how to remove the bobbin holder. I searched and found your video, which is a life saver! Thank you for your generosity in sharing this precious troubleshooting.
So glad I found you!!! Haven't tried this yet, but everything you did... I would've had the screwdriver out And it all would be a mess. You make perfect sense. Thank you and I will let you know how it goes.👍
I tried so many ways to put this back together. They all seemed logical. If I hadn't watched this video I was going to have to take my machine to a sewing machine shop and have them show me how to put it back together. You made it simple, i put it all back together and will never forget how to do it should it ever happen again THANK YOU THANK YOU THANK YOU Camille
Thanks you soooo much for this helpful video! I've owned a sewing machine for literally 33 years and today was the first time I had to put this part back together. You are a lifesaver :)
I took apart my machine to get thread unstuck and for the life of me couldn't remember how to get it back together being someone who rarely uses my machine. So thank you so much for this video!
Same I’m crying rn i just got my machine :(
Me too
Me three!
same
Me!! Thank you! Uhhhh!
You’re the third video I tried when attempting to figure out how to put this housing back together and yours is the ONLY one out of the three that explained everything in detail and put your camera at an appropriate angle!! Thank you!
thank you!!!!!! i’m in the middle of sewing masks for hospitals, friends and families during covid and my Singer jammed completely a few minutes ago.Devastation!!!! Can’t take the machine to a repair center as everything is still shut down here in new jersey - oh no!!! But i thought, “maybe some handy person put a tutorial on line to help some desperate stranger”. And i found you, randy, my absolute savior. Not only was the video easy to understand, your instructions worked!!!!!! Thank you for helping a complete stranger this morning.
Me too
You’re amazing for making this. It’s the little things like this that seem like insurmountable problems to newbie sewers like myself lol.
Lol, trust me. This is not a little thing.
Thank you Ray, I was in the middle of making masks and my bobbin casing fell out and I was ready to order a new machine. Your video was a great help and you explained the process very precisely.
Amazing! Had a piece of thread super stuck and my Singer was completely jammed. I'm new to sewing and I had no idea how to get the string unstuck. You saved me from returning this machine :)
You are such a sweetheart for showing us how to put that back together. I tried for 20 minutes to fix this before I looked on CZcams. Thank you so much!!
You are quite welcome. That’s why I make these videos. Just trying to help out whenever I can.
Thank you Randy. You're a lifesaver. After 50 years I've never had to deal with this issue but you made it fast and easy. Keep up the good work.
You’re welcome Becky.
It took me a while still but I did get it 😅 thank you so much! I super new to this and have no idea what I’m doing yet… but I will soon enough
Thanks. I have the instructions but I think they are horribly written. I thought I had a choice between the bottom bobbin or the top. I thread it at the top, but it doesn’t sew, now, you’re saying both has to be threaded. Where do I put the thread through from the bottom? It’s hard for me to believe they go through the same needle…The hole is so small, I had to use high powered microscopes glasses to put the tread through…it looks impossible to put two threads in that tiny hole….thanks for your help.
@@brownr749 I laughed at your description of how you think the top and bottom threads go together. In case your wondering, find a Y T video How a sewing machine works. It is a short video that shows pictures of what goes on with both threads and how they meet in middle and form a stitch. I would also suggest to get self a manual. Google it, there are even free copies of manuals for most machines. Still laughing.
When you have thread on the bobbin and pulled out about 3 inches put it in the bobbin holder. make sure you have the thread on the top threaded through the needle. turn the wheel towards you slowly and the bobbin thread will come up through the hole by itself
Thank you so much for posting this! It is quick, clear and concise - something to refer back to if confusion sets in! I appreciate that you use the correct terms for the parts.
Thank you so much for this!! I bought my machine second-hand and have never seen one with this type of mechanism in any machines I've used before -- this video was a lifesaver!
I just picked up sewing with a machine this year. I used to do it by hand for patches and things like pocket repairs, but I needed to fix my husbands pants.
It’s been about 6 months; and I don’t use my machine much. It’s a Singer M2100.
Today I had a massive jam up, and I moved one of the clips by accident and the whole unit fell apart. I panicked.
Then I found this video and now my machine works again! Yay!
Thank you for this video. It’s amazingly helpful to newbies like me!
You are welcome and that’s why I’m here.
I’m glad to help and thanks for watching. 😎👍🏼
I was about to take my sewing machine to the thrift store and purchase a new one. I was so frustrated trying to put the bobbin case back together I have always used machines with drop in bobbins. After watching your video it was quite clear what I was doing wrong. Thank you so very much for a great video. I greatly appreciate it👍
You’re welcome.
My hero! I was struggling to put this whole assembly back together. Turns out my needle wasn’t at its highest point! 🤦🏽♀️
Thanks for the help!
That was soooo important!
This was just brilliant. Mum had been trying to put her machine back together for ages without success but once I found this I managed to get it all up and running within minutes. Thank you!
You’re welcome.
You are a genius! I was expecting to have to take my machine to a repair shop until I found your video. Thank you soooooo much!
You’re welcome. 👍😎
Great instructions - took me less than 30 seconds to re-install the shuttle -thanks Randy!
You’re welcome and I’m glad to help. 😎👍🏼
Wow, wow wow
Thank you I was ready to throw this sewing machine out the window
yes!
THANK YOU SO MUCH! I've looked at 10+ videos to try to figure out my problem and at first I thought it was a timing issue but after watching this one and dissembling the shuttle hook, I found out that I had teeny tiny threads stuck inside!! I was so afraid to dissemble the hook but your video made it so easy and simple. After I cleaned out everything, I could start to sew again!!!! Life saver!! I've only had the machine for 2 days and I'm a first time sewing machine user and I thought my journey was going to end before I could even start....so thank you so much!! This was super helpful!!!
Oh my word! The needle got stuck down in the bobbin mechanism thing. I had to take the machine apart to get it unstuck and then I couldn't remember how to get it back together. I found your video on CZcams and what a blessing that was. In no time at the bobbin mechanism holder thingy was all put back together and working just. Thank you thank you thank for your video. God bless you!
You are welcome and Gods blessings to you as well. 😎👍🏼
I spent half an hour trying to figure out how to put this back together. Yours was the first video that came up and I was able to fix it on the first try! I didn't have the needle to the highest point. Thank you so much!
You are welcome
Thank you so much for this, you dont know how much you helped!!
Thank you so much
Amen!!
Eric - you took the words right out of my mouth! This video was EXACTLY what I was looking for!! Thank you Sewing Machine Man.
Seriously, I was in a panic.
Clear, concise, useful!
Thank you so much! This was so easy to follow, the instructions were so clear, much better than other videos I’ve tried today.
Having seen more than ten videos this one was the only useful. I was at the point to give up everything when finally I found your video and I was able to 'repair' my sawing machine within some minutes.
Thank you very much!
Excellent. Thanks for the positive feedback. 👍🏼😎
Spent half hour trying to put machine back together. Thank
You.
You’re welcome and thanks for watching. 😎😎
You are the man! I have been unable to use my machine for months! I had an alteration that I absolutely couldn’t avoid and hand stitching on this fabric, no matter how meticulous, would look awful. I gave up and decided I had to try to look for a CZcams video. I’ll still need to get some oil next time I’m in the city but for now my bobbin casing is in one piece again
When I put my shuttle back in place and with the shuttle race in place and the leavers in place, it is so loose! It falls apart. If I can get it to stay when I try to sew I get horrible thread bunching and then the assembly just falls apart. Whats wrong?
Thank you so much!!! Just the video I needed to "Solve the Puzzle". I loaned out my machine and when it came back they had "Solved the Puzzle" incorrectly. Great Video!!! Now I can do the Christmas sewing I had planned. You are a blessing to me at this Christmas season.
Had to step away from frustrating sewing attempt. Came back. Found and watched your video. Easy fix with your clear instructions. Thank you!
You’re welcome. Glad to help.
Thank you so much when you know it , it takes a second. I was spending 5 to 6 hours still didn't get it until I see your show. Thanks again.
44th century and t6
Thank you for posting this! Saved me this morning!
Thank you! My husband found a Japanese Class 15, all metal, probably from the 60s at a thrift store for $45 with cabinet. Although the machine looked pretty clean, the handwheel clutch was frozen and everything was tight. Cleaned and oiled the machine. The last thing was a thorough cleaning and oiling of the bobbin assembly. I really meant to keep it in order, but it just fell out. Your video was a lifesaver!
Good find. I know it will give you many years of service. Congratulations. Well done.
Mr. Randy you have saved me!! I’m using a friend’s machine and I was so worried I wouldn’t be able to put the bobbin back together! Thank you so much!!!
You’re welcome
Thank you , perfect information!!
That was perfect, thank-you!
It's been two years since I was sewing and I still need your videos, so thank you. 🙂❤️👍
I appreciate you. Thanks for watching.
Another year later and I couldn't find this video because I was searching for " BOBBIN ASSEMBLY."
A lot of us don't know what things are really called. Lol ❤ Thank you very much.
Found another video called "Help my sewing machine hook fell out" by Sews-A-lot , CZcams channel.
Appreciate you both so much !❤
exactly what I was looking for!
Being a "sometime sewer" you gave me the confidence to open up my bobbin assembly. Thank You! Like a million other people I'm trying to sew face masks.
Thank you for explaining the reassemble so well. It took a lot of frustration away from me, after watching quite a few other videos.
You’re welcome and thanks for watching.
I just was given my mother’s machine and it was all taken apart so this was a life saver for how to piece that back together. Thank you!
You’re welcome and I’m glad to help. 👍😎
Ditto, I was really flipping angry and now Im calm......sheesh
Wow, I'm so happy that if you were around I'd give you the biggest hug!! I have been trying for hours to get this thing assembled! The instruction booklet doesn't even come close to showing this! Thank you!
You’re welcome.
You are a life saver!! I have an old Dial and Sew cabinet sewing machine and I’ve never had the housing fall out before so when it did I had no idea how to put it back in until I watched your video.
Awesome. Glad to help.
I know it’s an older video, but it really helped me today. Thank you! My Kenmore is all back together!
It’s been my most popular video for five years now.
Thanks for watching. 😎👍🏼
I know this video is 5 years old, but this was very helpful today!!! Thank you! 😊
You’re welcome.
It’s my number one video by popularity, and it’s the first one I made out of necessity.
Thanks for watching. 😎👍🏼
What a champion! Thanks so much. My machine sat in the cupboard for 4 months because I was so frustrated with it. Your video helped me fix it in 10 minutes!!!
Excellent. Wonderful outcome. Glad to help. You’re welcome.
THANK YOU SO MUCH!!! I was sewing a shirt for my sister when my needle got jammed and I freaked out because I didn't know how to fix it so I took it apart and got the needle out but couldn't figure out how to fix it. YOU MADE MY DAY, THANK YOU!!!
Excellent. You’re welcome.
Thank you, Randy. I have not sewn with a sewing machine since 8th grade Home Ec. - Lets just say the 70's sound good right about now. I truly appreciate this tutorial, you are a lifesaver!
This video was soooo helpful. I was making cushions after not using the machine for at least 10 years, the shuttle fell out and your video was so clear, I was able to fix it myself. Thank you so much!!!
You’re welcome. Glad to help.
My son actually pushed this silver button and that moved the mechanism so I could put that stupid ring back in haha All happened while I was watching your video! Thankyou!
You’re welcome.
Thank you! Trying to get this back together for 30 min! Your video was great! Got it together in 30 sec!!! Appreciate you
You’re welcome and thanks for watching. 😎👍🏼
This is my second attempt at learning how to sew and the only video that helped me figure out how to put the bobbin in. Thank you so much!
You’re welcome
THANK YOU!!! I couldn't figure that out without your help, it's too late to call my sewing friends, I am glad I found you!
You’re welcome.
Thank you very much for posting this! Before I saw this video, I couldn't figure out how to put the thingamajiggy back together, after taking it apart, to remove a piece of thread stuck in the machine. You are a lifesaver!
You’re welcome
I have a Singer...but this video worked!!! Thank you soooo much! Got it working again. I told my Mom, I can do anything through CZcams!!!!
Thank you so much for posting this! I’m working with my moms sewing machine and couldn’t figure that part out for the life of me! Thank you again!!!!
You’re welcome.
So glad to find you. I was trying for a hour to put the thing back together! Gave up and decided to go on you tube later. Great video, thanks
You’re welcome and thanks for watching..😎👍
Thank you. I was really stuck in a bind this morning when I noticed my bobbin casing fell apart even after use last night. This saved me today. Thank you thank you thank you!!!
You’re welcome X 3.
Thank you so much for posting this, I simply couldn’t get my Janome back together after a thread blow out. These instructions helped me in a matter of seconds 🙌
You’re welcome. Glad to help.
It came apart so fast. I was scared of how to put it back together. You explanations worked wonders. My machine works!! THANK YOU!!
You’re welcome and I’m glad to help. 😎👍🏼
@@randyyoursewingmachineman9954 I'm able to make new born baby clothes into a shirts/sweaters for my Chihuahua. It's been years leaving the machine and you preformed the solution!
@@dogsareawomansbestfriend excellent. I’m glad to help you keep the chihuahua pups warm and dapper.👍😎
Thank you thank you. You are a star. When it fell apart I was aghast but I remembered watching videos when I purchased my Janome 423s. I will always turn to you in trouble.xxx
Thanks for your kind words. You’re welcome.
Only my word, thank you! I was cleaning this old machine I was gifted and took the bobbin out. The whole thing fell out! I’ve been fiddling with it for days now. It finally occurred to me to check CZcams. Watched several different videos that were no help at all. Then I found yours. You are an angel! It finally went in! Thank you, thank you, thank you.
You’re welcome. Glad to help.
What a nice video, excellent demo, thank you, Randy!
I have a Viking Husqvarna 6030 vintage machine I took apart for cleaning. Reassembly is a challenge. More complex than putting together an airplane. We sorely need videos on the vintage Viking machines. Please consider it.
This Kenmore is so cleverly designed, and far less work to clean out. Very nice.
I appreciate your kind comments.
Unfortunately, I’ve never been much of a Viking fan.
There’s too many reasons why, to enumerate here.
I’m the biggest fan ever of classic Singers, Kenmores, and random Japanese made machines.
Those machines keep me as busy as I can be.
Sorry about that. 😎👍🏼
🙌🏽🙌🏽🙌🏽🙌🏽
Thankyou so much!!!
I’m literally SWEATING over here because I’ve broken three needles trying to do this on my own!!! Your tutorial saved my sanity!!!!! I love you!!!!
I nearly gave up and paid to get it fixed! Thank you so much.God bless you !
Glad to help. May God bless you as well.
I don't know how many times in my 60+yrs. of sewing I have taken this bobbin assembly out and every time I must think and think about how to get it all back together. Now I have your video and my manual, you explain so much better than the manual does. Thank you, thank you.
You’re welcome. That’s why I made the video. Many of my customers would call me and I would take them through the reassemble process as I drove to a service call. Now, they can just look it up and everything is good. Thanks for watching and commenting. 😎
This video is a lifesaver for me.... my parts fell off and wasn't sure how to attach it back... but now I know .. THANKS
You’re welcome
This Video saved me from a night of frustration. Thank you so much for uploading this!!!
You’re welcome. 😎👍🏼
Thanks! My Aunt gifted me a sewing machine, came from Florida and had come apart.
You’re welcome and thanks for watching. 😎👍🏼
Thank goodness I've found your video I've been a sobbing mess because I've been so frustrated.. Thank you, you explain this so well 🙏
You’re welcome and I appreciate your comments. 😎👍🏼
Thank you! Thank you! Thank you! I thought I would have to replace the machine but this repair on my 20 year old Brother has me back and running!
Excellent. 😎👍🏼
You are a wonderful human being!! I got some thread stuck in my bobbin assembly and when I went to disassemble it, the whole thing fell apart before I could see how it went together in the first place. The manual was absolutely no help at all. Thank you again!
Thanks for your kind words. Glad to help.
I have done this a million times. Today I was literally having a brain fart! Thank you!!
👍
Thank you from the very bottom of my heart. I’m new to sewing. Yeah, my machine “locked up” like the hands of God were holding that bad boy together. Then it fell apart once I got the string out and I couldn’t figure out how to get all the lovely metal guts back together. You sir are a gentleman and a scholar. Thanks again.
I was struggling so badly until I came across this. Thank u so much!! 😄
Much gratitude to you sir. I have a Euro-Pro X sewing machine that was given to me as a wedding gift 16 years ago. There are occasions when glitches occur, and I simply need a straight-forward tutorial, instead of getting overly frustrated trying to problem solve on my own. THANK YOU for being concise, having a focused camera, and not obstructing anything.
You’re welcome and thanks for watching.
Thank you so much for the video. I’m new to sewing and I couldn’t explain to anyone what was happening or what the parts were. You explained it and I fixed it.
Excellent news. It always makes my day when another victory is won. Good job. 😎👍
THANK YOU THANK YOU THANK YOU!!! Saved me many hours of frustration on a machine with no manual!!!!
You’re welcome.
Thanks so much for this video. Undone little black tabs, and whole lot fell out!
Couldn’t for the life of me work out how to get it all back. You are a lifesaver! New subscriber
Thanks, and greetings from UK
You’re Welcome and thanks for subscribing. I appreciate your positive comments. Greetings to you from “across the pond”. 😎👍🏼
Thank YOU! Fixed this silly Kenmore in seconds watching this, after the bobbin assembly fell out in my hand. Appreciate it very much!
You’re welcome
I'm new to sewing and accidentally disassembled the hook race unit. I was working on getting it back together for 30+ minutes and couldn't figure it out. This video was a LIFE SAVER. Thank you!!!!
You’re welcome. Glad to help.
Thanks Randy for your video , is slow and clear.Thanks so much for making this video for people like us hardly sew.
You’re welcome and thanks for watching. 😎👍🏼
OMG, thank you for this! I'm learning to sew on my Mom's Montgomery Ward sewing machine and this video helped me put this part back together.
You’re welcome.
Great video. I did it!!! Now I can finish my project. Instead of trying to figure it out on my own, I could have save an hour and just jumped to your video. And when you mentioned about the oil and black thread... you were spot, so I put a bit of oil in there while I was at it!
Excellent. Thanks for watching. 😎👍🏼
Omg thank u... I’m a noob & i cried when my threads kept on getting stuck & these things came burst out literally 🤣🤣🤣 thank you for saving me 🥰🥰🥰🥰
You’re welcome.
you are a lifesaver! this was exactly what I was looking for. it feels good knowing how my machine works so I won't feel stuck when something goes wrong. thank you
Excellent. You’re welcome. I’m glad to help. 😎👍🏼
Thank you Randy, I've spent all morning trying to fix this problem. Thanks again 😊
You’re welcome. Glad to help.
Brilliant, I bought a machine off ebay, after discovering I'd bought a machine without a presser foot.. Feeling cheese off, I thought I'd give it a defluff etc.. And yeh you guessed it.. Fiddled about for 2hrs ++ with the casing then found your vid, thanks a million you made that so easy 👍👍👍
You’re welcome
Thank YOU so-much Sir. I’ve spent the last hour trying to figure this out on a Bernette 705. Thanks to you, my new thrift store find now works just fine!!! The ‘Sew must go on’!
Randy, Thanks so much for being here for us..I can't believe how much time I spent trying to puzzle together replacing my Domestic sewing machine bobbin which locked up then fell out. Only two parts but I could not put it back together! Now, I will work on tension problems, I hope that is as easy as you made this tutorial. Easy to follow calm and correct...
Thank you!! Knotted thread, I instinctively took it apart and couldn’t for the life of me figure out how to reassemble the bobbin casing! I had my machine running by the time the video was finished. No superfluous chat, just the info I needed. Thanks again, Carole
Excellent. That’s what I like to do. Cut out the nonsense blah blah and get to the point, right? Thanks for watching.
Thanks for this. My 38 year old trusty kenmore 1345 assembly came apart for the first time. You saved me.
You’re welcome
I decided to unbox my new sewing machine (new to sewing too!) and inadvertly lowered the arms not knowing how to remove the bobbin holder. I searched and found your video, which is a life saver! Thank you for your generosity in sharing this precious troubleshooting.
So glad I found you!!! Haven't tried this yet, but everything you did... I would've had the screwdriver out And it all would be a mess.
You make perfect sense.
Thank you and I will let you know how it goes.👍
Go for it, good luck and much skill. (The combo of success) 😎👍
Now I can sew again thanks to your clear and simple instructions! It brightens up this glum coronavirus day. Thank you Randy.
Bro u just saved me like an 2 hours of my life 1 listening to my wife be made and another for trying to figure this thing out!!!!
Glad to help. 👍🏼😎
Thank you! I just got a machine for my birthday and I'm already making things difficult for myself, you're a lifesaver haha!
You’re welcome. Happy Birthday!
I tried so many ways to put this back together.
They all seemed logical.
If I hadn't watched this video I was going to have to
take my machine to a sewing machine shop and have them show me how to put it back together.
You made it simple, i put it all back together and will never forget how to do it should it ever happen again
THANK YOU THANK YOU THANK YOU
Camille
This is why I love CZcams. I needed help with this exact issue and it was so easy. Thank you!
I’m a fan of CZcams for the same reason. Thanks for watching.
I LOVE YOU!!!!!
I just about had a STROKE when my machine just now fell apart while sewing. Aaaaah!😫
Now I'm back up & running.
Thank you!
Excellent. You’re welcome.
Thanks you soooo much for this helpful video! I've owned a sewing machine for literally 33 years and today was the first time I had to put this part back together. You are a lifesaver :)
You’re welcome. Now your knowledge and understanding of your machine will help you keep it in top shape.👍😎