the lack of labels on EOL's and SLC devices is bothering me LOL but that's just me being a picky SOB. That ANNUN is really neat, I wish I could run into one like that. Love the video as always Nic!
Yeah it's a problem to school district has with not specifying labeled fire alarm in the new buildings as they don't listen to the electrical staff that ask for it as far as the annunciator in Canada we have them like that in tons of buildings with custom graphic annunciators
@@nics-systems-electric Dude, that would drive me mad. It's already a troubleshooting nightmare to figure out Area of Refuge wiring and SLC Devices in this hotel project we took over one time. Previous company labeled NOTHING. But wow, that's neat! I wish those ANNUN Maps were more common here in the US, I think they're so cool!
Ok,that’s 3 more Wheelocks all ready for the durability testing bin. Also interesting variant of the Notifier/Mircom pulls in the gym…never seen that design before where you have to remove that top piece to activate; must be so the balls etc don’t set them off. Those baby swallows are super cute. As always Nic I just love these testing videos…you learn lots and get to see/encounter many interesting things along the way. Hope your new home FA install is going well so far.
I’ve had that happen before where instructions say to disable a zone to bypass certain outputs and when you do the output that’s supposed to be bypassed isn’t. I find it easier to disable actual addresses as opposed to disabling zones.
Keep in mind engineers often make a percentage of the projects cost so if the engineer looking after the fire side of things designs a more expensive complex system they make more money from the job
Plus, i can see that this school has one of your most hated bells you heard, The Wheelock MB-G10-24-R. I respect that. To me, It sounds like that because the MB-G10-24-R is a Motor bell.
interesting to see bells on strobe plates and yet the strobes arent wired to the bell but rather to their own NAC outlet..over here in the UK you wouldnt see that..i mean tbh we dont even wire things to a sounder circuit as our addressable panels can support addressable sounders (that go on the same loop as our smokes etc) benefit is you can make the panel command the sounders to make various noises (EG emulate a bell for fire and slow woops for police) (or woops for fires and emulated bell for class change (in schools))
I think I will prefer vibrating bells on code 3 rather than motor bells. Obviously we know the first one which is lag delays its like the motor keeps spinning when the signals not on, vibrating bells don’t do that they stop instantly after the signal stops. And another one is that the solenoid drops and muffles the gong and it’s very annoying.
Vibrating bills are definitely better for a precise signal. I haven't ever seen motor bells drop hammer onto the gong usually it is spring loaded and holds in the middle
@@nics-systems-electric ive seen tons of motor bells just drop the solenoid onto the gong and muffle it and i think its because something has worn out or smth inside the motor piece
is there anything you would reccomend for a kid who has sensitive ears going to a school with spectro alert advances? i also have no idea if their are temp 3 or continuoue
They don't need to sync as the wheelock devices only need to sync because there are multiple ones viewable in certain spaces but the system sensor devices don't need to be synchronized with each other
“I disabled the doors”
Doors:” screw you I’m closing anyway”
Pretty much lol
the word of the day is sladder
the lack of labels on EOL's and SLC devices is bothering me LOL but that's just me being a picky SOB. That ANNUN is really neat, I wish I could run into one like that. Love the video as always Nic!
Yeah it's a problem to school district has with not specifying labeled fire alarm in the new buildings as they don't listen to the electrical staff that ask for it as far as the annunciator in Canada we have them like that in tons of buildings with custom graphic annunciators
@@nics-systems-electric Dude, that would drive me mad. It's already a troubleshooting nightmare to figure out Area of Refuge wiring and SLC Devices in this hotel project we took over one time. Previous company labeled NOTHING. But wow, that's neat! I wish those ANNUN Maps were more common here in the US, I think they're so cool!
Ok,that’s 3 more Wheelocks all ready for the durability testing bin. Also interesting variant of the Notifier/Mircom pulls in the gym…never seen that design before where you have to remove that top piece to activate; must be so the balls etc don’t set them off. Those baby swallows are super cute. As always Nic I just love these testing videos…you learn lots and get to see/encounter many interesting things along the way. Hope your new home FA install is going well so far.
I’ve had that happen before where instructions say to disable a zone to bypass certain outputs and when you do the output that’s supposed to be bypassed isn’t. I find it easier to disable actual addresses as opposed to disabling zones.
When the government gives you money to build a school, just spend it on way too many smoke alarms!
Keep in mind engineers often make a percentage of the projects cost so if the engineer looking after the fire side of things designs a more expensive complex system they make more money from the job
love the sign at 22:35
Plus, i can see that this school has one of your most hated bells you heard, The Wheelock MB-G10-24-R. I respect that. To me, It sounds like that because the MB-G10-24-R is a Motor bell.
interesting to see bells on strobe plates and yet the strobes arent wired to the bell but rather to their own NAC outlet..over here in the UK you wouldnt see that..i mean tbh we dont even wire things to a sounder circuit as our addressable panels can support addressable sounders (that go on the same loop as our smokes etc) benefit is you can make the panel command the sounders to make various noises (EG emulate a bell for fire and slow woops for police) (or woops for fires and emulated bell for class change (in schools))
I love these alarm testing videos keep them coming!
Sadly their gonna end soon
@@the_boywholived2110why?
@@ILVT_Plumbing nic graduated from school and will no longer be working on schools
That's Awesome that you get to do all this. Very cool! When will we see Part 2 Of your House system?
Same
That fire alarm has a cold
Awesome testing keep up the good video and work and the house system!
I think I will prefer vibrating bells on code 3 rather than motor bells. Obviously we know the first one which is lag delays its like the motor keeps spinning when the signals not on, vibrating bells don’t do that they stop instantly after the signal stops. And another one is that the solenoid drops and muffles the gong and it’s very annoying.
Vibrating bills are definitely better for a precise signal. I haven't ever seen motor bells drop hammer onto the gong usually it is spring loaded and holds in the middle
@@nics-systems-electric ive seen tons of motor bells just drop the solenoid onto the gong and muffle it and i think its because something has worn out or smth inside the motor piece
@@notifierfan6078 definitely different ones than any I've ever seen
@@nics-systems-electric yea but that one elementary school with those simplex bells with the 320c they do that well most of them do
At 8:00, I understand what you mean, the movie myths are so ridiculous
Aw the birds ❤❤❤!
Alarms:
Edwards and Wheelock Bells on Wheelock RSSP's
If you had left the bells on I bet those pigeons would've left the area but you still would've had to wipe the door handle
Yeah
Just wondering whats the code on making that fan automatic when the panel was done?
is there anything you would reccomend for a kid who has sensitive ears going to a school with spectro alert advances? i also have no idea if their are temp 3 or continuoue
Wow!!:)
Nice
Keep up the good work on here I hop we can be friends with u do a really good job on CZcams
Why do they have System Sensor remote strobes but Wheelock strobe plates? They can’t sync with each other.
They don't need to sync as the wheelock devices only need to sync because there are multiple ones viewable in certain spaces but the system sensor devices don't need to be synchronized with each other
Are the strobes in this school synced at all?
I'm not sure if this one is if it is it would only be the wheelock devices
I wish schools were this progressive and well-equipped in America.
I think a lot of them are a lot better just depends where you are I've seen worse too
HI :) Like your channel. :)
Enough smoke detectors?
Some engineers go a little crazy with them
More testing !!!!!!
If it is a new notifier system why does it have bells
I'm not sure what you mean. The brand of the system has nothing to do with bells or not.
@@nics-systems-electric well it is a new system did not think it would have bells
@@RobloxFireSecurityCorp.-st3cl it's 17 years old not brand new
@@nics-systems-electric the notifier panel is 17 years old
@@RobloxFireSecurityCorp.-st3cl yup
Sasuke SECU see who has a poo sake cooker CPAC you see poop hello hello