I wouldn't worry too much about battery vs mains power. Either way the amp is still receiving 9 volts DC. You should use the last set of pins for negative (ground) and leave the middle set unused. That way if you ever connected a speaker using a stereo cable (unlikely) the negative wire would still be in the right place, the sleeve.
This worked like a charm, thank you! Used my Katana Mini + Harvey Benton G112 Vintage. I did follow Angus Black's tip of using the last set of pins for black, which works well and makes the hack more universally compatible. Cheers!
@@heavyfeitus870 you should be able to find it in the comments under the video. He advised using the last set of pins for the ground (negative) and leaving the middle set of pins unused. That makes the build compatible with stereo jack cables, in case you ever use one to plug your guitar in. Hope that helps!
Just for kicks I'd love to hear the Katana Mini go through the Artists speaker for an interesting comparison. No soldering required just connect up to the spade terminals with a jack socket the other end. Really interesting mod. I've been thinking about buying a Katana mini for the bench for testing (and time passing when I've had enough of fret polishing for a while) but this would be a cracking upgrade if I could buy a smallish cab for the corner of the room. Cheers!
pretty cool man, should be a factory feature, but that being said there should be no reason why you could not use the power supply with this mod as nothing else was disturbed
TheGuitarGeek +this is true...in the modern age of lawsuits and personal injury lawyers you must have a disclaimer for almost everything. Maybe just adopt a general disclaimer at the start of every video to save some hassle.
it's because the receive end of the speaker have a capacitor prevent overload input, or else you need to put additional capacitor at signals cable series to the jack.
Hi, great videos! :-) I have a MkI 100 212, and I was hoping that you could do a video where you could show how to do a mod so that one could both use the amp as a head with an external cab, as well as using the the internal cab with an external head, preferably by adding jacks to the real panel beside the existing ones. In my opinion the MkI's sound better than the MkII's. I also have the MkI 50, and if there is a way to add a FX-loop to the rear panel in a similar way with jacks, that'd be a world of help. The MkI 50 - given that one tweak it so that it sounds right because right out of the box it really does not - might be the best amp of all time, considering versatility, sound, portability, and plain powerful headroom. Cheers! :-)
This is an excellent mod. I did the same to my little practice amp, the Fender Mustang Mini. Now I get USB audio and software controlled patches, but with an optional 1x12 when I want to upset the neighbours.Nicely explained, thanks!
TheGuitarGeek I guess at worst it might drain the batteries slightly faster when it's driving an external cab, but there's a lot of untapped power in the circuits of some smaller amps, just waiting to get out!
that is asbolutely amazing man! I got this amp as a present and this amp is amazing and I will do the upgrade for the external cab!!! Thanx for the video!! you are great!
works great ,can do it with 2 2way switches too if you cant find switching jack ,, just put a 2 way switch on both speakers power wires (red) coming from the computer(power),(if using 2 seperate switches make sure 1 switch doesnt cut power to the other ) wanted the nice delay louder and cheaper ) will work exactly the same on batteries or powered from the wall , i see why he said that but its a non issue ,have fun my friends and thanks guitar geek dude )
Great idea and demonstration mate was thinking of getting one of these but already have a blackstar fly so I bought the 100 watt katana head instead and it is awesome, in fact I loved it so much I bought the 100 2x12 combo as well they are outstanding amps can't see me ever needing any other amps , (though I do love me peavy bandit red stripe for clean strat tones)need bigger house help.
Thanks guitar geek yes definitely going to try it when I get the opportunity but I have to say that I really love the speakers in the katana's I have and have to wonder if it's worth nearly £200 and some odd pounds extra for a different speaker and change of styling but I'll give it go ,cheers for the reply and great content.
Yeah! I love them 2! I use Celestion V-types live for a bit more High end. They sound a lot like greenbacks, but they cut just a little bit more frequency wise. With my torpedo 2 notes stuff I always use a regular greenback cab! And also cool to look at is the Neolight Creamback Celestions if you're gigging! They sound like greenbacks (if not slightly better), they can handle 65 or more watts (I think), but the best thing is that they only weigh 1,5 KG!
For some reason I don't like V30 speakers (with my amp). But I love them for some other amps! And yes the NEOcreambacks look awesome... I want them for a lighter/louder greenback sounding 212 :) BTW I love that P90 guitar you're playing! P90s and Greenbacks are tone heaven...
Hello! I really enjoyed this video. I am wondering if I'd plug this into the 16ohm jack on my amp? Is there a way to tell how many ohms the output is? Also, you used a speaker cable I assume?
What specs on external speaker/cab do you recommend ...(I tried a fender pa speaker...which didn't work...but I'm sure there is a good reason...thanks for your insight on this question and kudos on this instructional video!
Thanks, just did it but a silly, very silly question ! You plug the guitare in the input of the Katana mini. You plug another jack on the "new" jack socket we add, but in which input do you plug it on the "other" cab ? If i plug on the "input" of my Blackstar HT 20 ( combo) it will pass through the amplifier.... on the rear i have Emulated output, the send/return and the ouput for other speaker.... Thanks a lot
Wait! What's the recommended resistance number ( 2 4 8 ohms) for this. Excuse me if im not making too much sense. EDIT: never mind, ive just scrolled thru the comments, so its 8 ohms. ALSO. I Cant bloody believe boss doesnt do this stock
hey! would this work to wire a speaker IN jack as well? since the ac10 already has a speaker out that mutes the original speaker, making one more like this for a speaker in would give the ability to use an attenuator between the two i think? does that sound about right?
Just bought one of the Boss Minis amps and am thinking of doing this to it. I'm not an electronics expert but what difference can it make to use the 9 volt power adapter after doing this mod? The power supplied is still 9 volts...
Is it possible to a do this mod to a stereo micro amp, such as the Laney mini-st? I'm thinking to add the jack to just one of the channels (let's say the left one), but what about the other one? disconnect it or leave the internal speaker?
the “rec out” port is not connected to the speaker, it acts as a headphone output/recording output to a mixer or interface. it’s also a 3.5mm jack, so you could not connect a speaker cable to it even if you wanted to.
Killer man, very, very cool, here is a question for the ages, a friend says he thinks you can plug 2 Mini Katana amps together.... what are your thoughts on this goofy question,if you don't mind sir
There is no reason not to run this off mains, your switching power supply is going to be supplying the same DC voltages to the amp as the batteries and there are no mains voltages going on in the katana, and by the time you get to the audio output you are not going to be seeing DC either just the audio signal. This is a safe mod.
Good day, my VOX AIR GT will have two speakers, how can I connect one speaker in the same way, but more? FANKS.(two speakers at 8 om each and 25w power,The speaker you want to connect 80w 8om Celestion seventy)
Hello, great video! I am thinking of drilling my katana mini to use the 12inch speaker of my old line 6 spider iii 30watt combo, by plugging the cable in the aux input so to only use the speaker. Is this feasible? Or will I have a damage regarding the impedance of the line 6 speaker?
Did not work with my Harley Benton 212 V30 Vintage. Box is ok, internal speaker as well, but no sound when the box is connected. Already tried different cables. 😥
That can't drive a speaker coil, only a headphone driver. I have a Tech 21 Deuce Deluxe powered cab -- so it can take any signal, like a headphone out and amplify it with its own power. I'm sure it would work great with the Katana mini --- and no mod needed. But I can get such great sounds out of the Joyo American Sound or AC Tone pedal ($25 each) through the Deuce Deluxe, that I don't need the Katana. . . .
You know it occurred to me well after asking this that it would likely be a massive overkill waste to put the same speaker as the head given the ratings it can handle
ARe there any clear pics of the PCB? I was wondering if the delay, if it was using a generic digital unit, might have an input that controls the feedback/repeats. Increasing it abit would make it far more useful for me.
TheGuitarGeek I like it. It’s almost exactly like the guitar I invented on this weeks podcast, more of a tele shape but made like a les Paul. It looks amazing sounds good from what I can tell from that set up too.
Just something to think think about and would love to hear a lawyer's professional opinion. The mod if done carefully and correctly is protected by the Magnuson Moss Act in the US. The manufacturer has to prove your mod caused the problem. It's used all the time with vehicle modifications
Now the katana air can be got for 250 pound I'm going to get one as I love the Bluetooth control of amp and sleep to on wireless I'm going to mod it to take a single 10 inch speaker when I want it loud will just buy a cabinet and connect it up was going to keep it stereo but to me amps in the room should be mono Just going to interrupt the 2 air stereo speaker outputs and mono them into jack plug into a cab was going to use my 12 inch Hughes and Kettnercombo as a cabinet but 12 inch may be too much loudness to get speaker vibrating properly 8 or 10 inch may be better as I think that katana air sound isn't as good as vox or thr but I think it's the little plastic box and poor speakers although handy to keep for low volume There is enough control in airs app to get frequency balance good I think through a single good speaker I would retain all of the airs brilliant wireless and Bluetooth use along with all the effects but in a bigger bassier sound poss a celeston something rich sounding May be my perfect amp
I wouldn't worry too much about battery vs mains power. Either way the amp is still receiving 9 volts DC.
You should use the last set of pins for negative (ground) and leave the middle set unused. That way if you ever connected a speaker using a stereo cable (unlikely) the negative wire would still be in the right place, the sleeve.
Give this man a medal!
Thank you. I accept cash, PayPal or pirate gold
This worked like a charm, thank you! Used my Katana Mini + Harvey Benton G112 Vintage. I did follow Angus Black's tip of using the last set of pins for black, which works well and makes the hack more universally compatible. Cheers!
hy Nicolas, excuse me, what "angus Black´s tip" do you mean? thanks
@@heavyfeitus870 you should be able to find it in the comments under the video. He advised using the last set of pins for the ground (negative) and leaving the middle set of pins unused. That makes the build compatible with stereo jack cables, in case you ever use one to plug your guitar in. Hope that helps!
@@MrMidnightSon Of course it helped thank You
Just for kicks I'd love to hear the Katana Mini go through the Artists speaker for an interesting comparison. No soldering required just connect up to the spade terminals with a jack socket the other end.
Really interesting mod. I've been thinking about buying a Katana mini for the bench for testing (and time passing when I've had enough of fret polishing for a while) but this would be a cracking upgrade if I could buy a smallish cab for the corner of the room. Cheers!
You're welcome! I'm one step ahead of you...stay tuned
That was pretty much the plan mate... ;o)
pretty cool man, should be a factory feature, but that being said there should be no reason why you could not use the power supply with this mod as nothing else was disturbed
I agree but I can't advise someone to play with electricity once they've fiddled round inside. Gotta stay safe!
TheGuitarGeek +this is true...in the modern age of lawsuits and personal injury lawyers you must have a disclaimer for almost everything. Maybe just adopt a general disclaimer at the start of every video to save some hassle.
That's a good idea! I'll get that done
Great! So i can use the power supply?!?! Neat. That way i can also spare spending money burning thru batteries
Awesome mod! I might just try that some day! :) thanks great video !
You're welcome man. Easy peasy too
I did that with old Vox AC1 9v toy... hooked to friends JBL PA speakers... amazed it drove them....
It feels like it shouldn’t work but it really does
Just did this mod: brilliant! Thanks 😀
it's because the receive end of the speaker have a capacitor prevent overload input, or else you need to put additional capacitor at signals cable series to the jack.
great video, as usual. glad you are back "solo"!
thank you.
Hi, great videos! :-) I have a MkI 100 212, and I was hoping that you could do a video where you could show how to do a mod so that one could both use the amp as a head with an external cab, as well as using the the internal cab with an external head, preferably by adding jacks to the real panel beside the existing ones. In my opinion the MkI's sound better than the MkII's. I also have the MkI 50, and if there is a way to add a FX-loop to the rear panel in a similar way with jacks, that'd be a world of help. The MkI 50 - given that one tweak it so that it sounds right because right out of the box it really does not - might be the best amp of all time, considering versatility, sound, portability, and plain powerful headroom. Cheers! :-)
Great simple mod that could possibly be done on other mini amps too.
This is an excellent mod. I did the same to my little practice amp, the Fender Mustang Mini. Now I get USB audio and software controlled patches, but with an optional 1x12 when I want to upset the neighbours.Nicely explained, thanks!
Great fun isn't it. I was genuinely surprised how well it held up
TheGuitarGeek I guess at worst it might drain the batteries slightly faster when it's driving an external cab, but there's a lot of untapped power in the circuits of some smaller amps, just waiting to get out!
I am still on my first set of batteries so we will see
TheGuitarGeek actually, I've never had to swap the batteries on mine either come to think of it and it's been in use for 6 months now. Hmm.
We must have magic batteries
that is asbolutely amazing man! I got this amp as a present and this amp is amazing and I will do the upgrade for the external cab!!! Thanx for the video!! you are great!
Hey brother. You are welcome ;-)
Thanks bud, I'm going to do the same so really appreciate your detailed description 👍
You’re welcome! I Hope it works out
Great mod: through jack just ordered :)
Brilliant Andy, loved it. Simple yet genius 👍
Cheers Tom. Do you have a katana mini?
No Andy but I plan to do the same thing to my Kat 100 😊
Then wait a few days... ;)
Excellent!!
That's a really cool mod! I'm getting a boss katana 100 1 by 12 combo tomorrow! I'm excited 😄
Enjoy your new gear
TheGuitarGeek thanks! I got it today and I love it! Great first amp!
First amp? Wow you are really lucky
works great ,can do it with 2 2way switches too if you cant find switching jack ,, just put a 2 way switch on both speakers power wires (red) coming from the computer(power),(if using 2 seperate switches make sure 1 switch doesnt cut power to the other ) wanted the nice delay louder and cheaper ) will work exactly the same on batteries or powered from the wall , i see why he said that but its a non issue ,have fun my friends and thanks guitar geek dude )
Great idea and demonstration mate was thinking of getting one of these but already have a blackstar fly so I bought the 100 watt katana head instead and it is awesome, in fact I loved it so much I bought the 100 2x12 combo as well they are outstanding amps can't see me ever needing any other amps , (though I do love me peavy bandit red stripe for clean strat tones)need bigger house help.
That's a nice collection. You should try the artist. Get a bigger house first though
Thanks guitar geek yes definitely going to try it when I get the opportunity but I have to say that I really love the speakers in the katana's I have and have to wonder if it's worth nearly £200 and some odd pounds extra for a different speaker and change of styling but I'll give it go ,cheers for the reply and great content.
Thanks man. As always,enjoy what you have first
Great video Andy! I love greenbacks! I use a Palmer 212 that I love with my Plexi... So funny how much of the tone comes from a cabinet! Cheers man
It's often overlooked. Greenbacks are my favourite
Yeah! I love them 2! I use Celestion V-types live for a bit more High end. They sound a lot like greenbacks, but they cut just a little bit more frequency wise. With my torpedo 2 notes stuff I always use a regular greenback cab! And also cool to look at is the Neolight Creamback Celestions if you're gigging! They sound like greenbacks (if not slightly better), they can handle 65 or more watts (I think), but the best thing is that they only weigh 1,5 KG!
My favourite mix is a v30 with a greenback. I'll have to take a lok at that creamback, sounds great so far!
For some reason I don't like V30 speakers (with my amp). But I love them for some other amps! And yes the NEOcreambacks look awesome... I want them for a lighter/louder greenback sounding 212 :) BTW I love that P90 guitar you're playing! P90s and Greenbacks are tone heaven...
I'm going to have to go on a speaker safari at some point! Thanks max. It's the line6 jtv59p. Absolutely lovely guitar
What a great mod and that Guitar. Oooft
Ooooft indeed. Nice fat neck and the p90s are cracking
I'm sure my Katana Mini has Phones/Rec Out port on the back.. so that is not usable?
Hello! I really enjoyed this video. I am wondering if I'd plug this into the 16ohm jack on my amp? Is there a way to tell how many ohms the output is? Also, you used a speaker cable I assume?
Thanks man, i'm gonna try this.
Great mod ! Do you now a way to modify the channel handswitch to implement a footswitch between clear channel and first saturated channel ? Regards.
I use 1/8 aux cable from the emulated cab out and plug it into my P.A.
What specs on external speaker/cab do you recommend ...(I tried a fender pa speaker...which didn't work...but I'm sure there is a good reason...thanks for your insight on this question and kudos on this instructional video!
Great video! Thanks!
Thanks, just did it but a silly, very silly question ! You plug the guitare in the input of the Katana mini. You plug another jack on the "new" jack socket we add, but in which input do you plug it on the "other" cab ? If i plug on the "input" of my Blackstar HT 20 ( combo) it will pass through the amplifier.... on the rear i have Emulated output, the send/return and the ouput for other speaker.... Thanks a lot
Great video, I am going to do this next weekend! Please can you tell me what wire I should use? Thank you 👍
I have been doing this adding a switch to it. Are both speakers live on your mod when you plug to the cabinet?
Nice and easy! Great video!
Cheers. Yes, it's very simple but very cool
hey do you think that this mini boss katana mod can keep it up with a drummer?
Wait! What's the recommended resistance number ( 2 4 8 ohms) for this. Excuse me if im not making too much sense. EDIT: never mind, ive just scrolled thru the comments, so its 8 ohms. ALSO. I Cant bloody believe boss doesnt do this stock
I measured mine, it is 4 ohm.
it said 4 ohms on the back of the speaker in the video.
What speaker should I put in to sound better than stock? Please help
hey! would this work to wire a speaker IN jack as well? since the ac10 already has a speaker out that mutes the original speaker, making one more like this for a speaker in would give the ability to use an attenuator between the two i think? does that sound about right?
Ive got one being delivered in a week or close too a week whats it like for bedroom practise where you need distortion in a singular room only
maybe you mentioned it - what impedence is the amp looking for? 8ohm?
i didnt. i had to guess at 8ohms. Seems fine to me and 8ohms is a safe bet.
I've just checked. it's 8 ohms
TheGuitarGeek On Jay Parmar's video on the same topic, he said the impedance is 4 Ohms.
Which is it exactly? 8 or 4
The speaker inside is marked at 8 ohms.
@@TheGuitarGeek If you pause at 6:50 with the speaker in view, doesn't it say 4ohm?
Just bought one of the Boss Minis amps and am thinking of doing this to it. I'm not an electronics expert but what difference can it make to use the 9 volt power adapter after doing this mod? The power supplied is still 9 volts...
Is it possible to a do this mod to a stereo micro amp, such as the Laney mini-st? I'm thinking to add the jack to just one of the channels (let's say the left one), but what about the other one? disconnect it or leave the internal speaker?
I did that on my roland cube mini, and the result is UNBELIEVABLE when it comes out of my 4x12". It's quick, inexpensive and fun to do, too.
Damn right!
I agree! The micro cube is a lot thicker to drill through but it's well worth it!
The Roland MicroCube GX is 4 ohms. Did you have any trouble plugging it into an 8 ohm cab?
i know it’s been a few years, but would you happen to have a link for the jack for a US buyer?
why cant you just come out of headphone speaker output..into external speaker?
whats the difference between this and using the "rec out" port...? 🤔 🤔 🤔
yes same question
the “rec out” port is not connected to the speaker, it acts as a headphone output/recording output to a mixer or interface. it’s also a 3.5mm jack, so you could not connect a speaker cable to it even if you wanted to.
Brilliant!
Sick mod .👍👍👍👍👍👍🔥🎸🎸🔥🔥🔥🔥🔥🎸
What guage wire did you use on the speaker! Thanks nick
Killer man, very, very cool, here is a question for the ages, a friend says he thinks you can plug 2 Mini Katana amps together.... what are your thoughts on this goofy question,if you don't mind sir
Hey Greg, in which way would you plug them together?
Excellent video.🖒
Thanks
can you use any cab with any impedance?
Hi Guitar Geek! Great video, cheers. Is it possible to incorporate an effects loop?
Unfortunately not without a LOT of research.
There is no reason not to run this off mains, your switching power supply is going to be supplying the same DC voltages to the amp as the batteries and there are no mains voltages going on in the katana, and by the time you get to the audio output you are not going to be seeing DC either just the audio signal. This is a safe mod.
Cheers Anthony!
Awesome, I'll do that too asap!
Sounds pretty good doesn't it!
Yeah, really does! Thanks for the Vid, I'm a real idiot when it comes to electrics...^^
It's not my strongest point but I figured it out. If you need any help, just give me a shout
This is awesome! What sort of wire gauge is suitable for wiring up a switch like this?
Thanks! Just match the wire that Boss use and you'll be fine.
would it be possible to make a small 2x8 cab that the Katana Mini could safely power so long as the two 8" speakers are 4ohm each?
The resistance depends on how you wire the speakers but as long as the sum is 8 oohms you will be ok. I powered the 212 rather nicely!
You nailed it Buddy Hollie...
Good day, my VOX AIR GT will have two speakers, how can I connect one speaker in the same way, but more? FANKS.(two speakers at 8 om each and 25w power,The speaker you want to connect 80w 8om Celestion seventy)
Hello, great video!
I am thinking of drilling my katana mini to use the 12inch speaker of my old line 6 spider iii 30watt combo, by plugging the cable in the aux input so to only use the speaker. Is this feasible? Or will I have a damage regarding the impedance of the line 6 speaker?
Don’t do that! Speaker out to speaker only
What about the transformer?
What the use big speaker don't damage of the amply, because that's different power to support of the speaker?
Done the way I have done it, you won’t damage the amp or the speaker
Okey thanks for information.
I did it today :) it sound really good through harley benton 2x12 V30 :D (however Joyo Zombie still sounds better :D
Has the modification been done with the Katana Air? It has two speakers I believe. Would this mod be possible or recommended?
czcams.com/video/QhFI1VkWbFo/video.html
Bugger, just sold mine. anything on the Katana air ?
Give me a few weeks. It's coming
why not use the rec out terminal for the same via some adaptors.. /? just asking will it change the sound or output ??
i was think the same just using the earphone output? haha. i've not expert in these matters :)
Do an effects loop mod
Great vid, thanks. A link for the switcher would be good and handy.
Good idea. I wouldn't be able to cater for everyone though. Just search Google for "1/4 Inch Stereo Switched Jack socket"
Great tutorial! Would a mono switch jack work as well?
have you already tried to play it with some effects?
Future video!
Great video Andy
Thank you!
Does this mods work for yamaha thrs?
How's it sound compared to the other Katana models when out of a bigger cab like that?
It's difficult to get it stay clean but it sounds good. It doesn't sound like a mini amp
Can I do this trick , ill buy a Katana Mini and buy a 2x12 Cabinet ? Is that alright ?
That’ll work!
Stupid question but does the stock speaker still work when not hooked to external?
Yes it does
Does the small speaker shut off when plugged into the cab? Or is it on as well?
Yes,that's very important. The switched socket disconnects the internal speaker when the cable is inserted
What a gas!
Cheers lou
Did not work with my Harley Benton 212 V30 Vintage. Box is ok, internal speaker as well, but no sound when the box is connected. Already tried different cables. 😥
This mod is not cabinet specific. You’ve made a mistake somewhere
@@TheGuitarGeek I'll try to hardwire the cable. Maybe the jack is broken. Thank you.
@@TheGuitarGeek It's working now. Mostly the problem is the dumb human not knowing what he is doing (me). 😂
I hate to agree but I do 😂
Hi i was not able to find that jack anywhere, would you be able to tell me the exact name? Or maybe a link? Thanks a lot :D
It’s a mono jack socket
@@TheGuitarGeek first of all thanks for the reply found some !
Brilliant news! Good luck with the mod
should I use speaker cable or just a guitar cable? thanks!
Speaker cable for speakers, guitar cables for guitars
What impedance is the original speaker?
Looks like 8ohms
My Katana mini has headphones output. Doesn't it work the same as the mod?
That can't drive a speaker coil, only a headphone driver. I have a Tech 21 Deuce Deluxe powered cab -- so it can take any signal, like a headphone out and amplify it with its own power. I'm sure it would work great with the Katana mini --- and no mod needed.
But I can get such great sounds out of the Joyo American Sound or AC Tone pedal ($25 each) through the Deuce Deluxe, that I don't need the Katana. . . .
Got a link for the output jack used for the mod?
Without knowing where you are from.. no sorry. Seems you forgot the magic word too
How can small batteries power such big speaker?
Must be magic
TheGuitarGeek give serious reply im not understanding setup
I don't know the physics behind it. Try Google
TheGuitarGeek the speaker does not have it's own power?
It does not
Does anyone know, if I could replace the speaker with a bigger one? Like 5 inch?
Obviously I'd need a bigger box. But would it be powerful enough?
As long as you match the impedance, you are good to go!
do we know if the speaker is the same as the speaker included in the 100w head?
i believe the one in the head is 8 inches, while the one in the mini is 4 inches, other than size i think its the same.
You know it occurred to me well after asking this that it would likely be a massive overkill waste to put the same speaker as the head given the ratings it can handle
It’s not the same
That is a great idea I think I could even do that . Because it's solid state I don't have to worry about speaker impedance do I ?
Does It work with the fly mini
The theory is the same
It not a huge difference for the clean sound
ARe there any clear pics of the PCB? I was wondering if the delay, if it was using a generic digital unit, might have an input that controls the feedback/repeats. Increasing it abit would make it far more useful for me.
I don’t have clear pics but happy to post some on IG. Come find me
awesome...
how much is the cabinet?
This one is around €200
TheGuitarGeek thx for replying. Okey so this mod is for those who already own a cab maybe. Otherwise better to for the whole K 50 maybe.
Yes I think so. You could also plug it in to a combo amp speaker
TheGuitarGeek ahhhh that's interesting...
Medium cabs in good working order can be had second hand for small amounts usually. It would be very worthwhile for someone on a tight budget!
my question is whats that guitar? it looks awesome
It IS awesome. Quite devisive though... it's the line 6 variax jtv59p.
TheGuitarGeek I like it. It’s almost exactly like the guitar I invented on this weeks podcast, more of a tele shape but made like a les Paul. It looks amazing sounds good from what I can tell from that set up too.
It plays like a beast too. P90s sound great. Chunky neck and lovely heel cutaway. That's even before the computer business begins!
Just something to think think about and would love to hear a lawyer's professional opinion.
The mod if done carefully and correctly is protected by the Magnuson Moss Act in the US. The manufacturer has to prove your mod caused the problem. It's used all the time with vehicle modifications
That’s a great point! I have no idea how it would apply internationally if at all. Something to think about though! Thanks
@@TheGuitarGeek international depends on the individual country consumer protection laws
Now the katana air can be got for 250 pound I'm going to get one as I love the Bluetooth control of amp and sleep to on wireless
I'm going to mod it to take a single 10 inch speaker when I want it loud will just buy a cabinet and connect it up was going to keep it stereo but to me amps in the room should be mono
Just going to interrupt the 2 air stereo speaker outputs and mono them into jack plug into a cab was going to use my 12 inch Hughes and Kettnercombo as a cabinet but 12 inch may be too much loudness to get speaker vibrating properly
8 or 10 inch may be better as I think that katana air sound isn't as good as vox or thr but I think it's the little plastic box and poor speakers although handy to keep for low volume
There is enough control in airs app to get frequency balance good I think through a single good speaker
I would retain all of the airs brilliant wireless and Bluetooth use along with all the effects but in a bigger bassier sound poss a celeston something rich sounding
May be my perfect amp
Sounds like a plan! Where can you get the air for £250?
Used not going to destroy a new one
@@simoncab1362 Did you do this modification and how did it turn out? Sounds like a prefect combo if it works
Hi, will this jack socket work with your way of doing this?
www.thomann.de/gb/neutrik_rean_nys_216_g.htm
Thanks!
Sadly not. I can only speak for the one in the links I posted
@@TheGuitarGeek well its a 6 pin stereo switched jack socket. What brand and model did you use so I can compare the specs? Thanks!
@@TheGuitarGeek also what links?
Hi anyone knows the ohm rating for the speaker in the katana mini?
I would take an educated guess at 8.
Thanks man...
A new speaker can make all the difference.
Certainly can
Hi,i would like to do the same mod on a 2 speakers amp...is the extention cab socket wiring the same of this video?Thanks
czcams.com/video/QhFI1VkWbFo/video.html
Can I do the same thing to katana air?
Sadly not with this method.
TheGuitarGeek Could u please make a video for katana air?That would be awesome!It seems no one has done that yet!
Please such a mod for the Katana Air!
That would be great!😉
Many users are waiting i think!
has anyone tried to plug their katana mini on a socket while using a speaker cab? if so did anything bad happened?
I do and no it hasn’t. That was just a disclaimer in the video.
I bet this would be a killer cheap preamp
I could try that!
Is this internal speaker bypass only when connected to external speaker applicable for the katana 50?
Yes that would also work