Thank you for your video I have a 96 GMC Sierra 1500 z71 with A similar problem that occurred yesterday and your video led me straight to my problem now my trucks Doesn’t sound like it wants to faint thank you for your video it helped me so much and save me a trip to my mechanic
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Both my 01 suv and 01 pickup started running crazy this week . My truck is making a howling noise for months and running like the fuel pump is going . I’m swapping this line out tomorrow. Crazy part is I didn’t even look this problem up this video just popped up on my CZcams . Life saver
God Bless🙏You n ure family! You Are an angel send by God put u in my way I thank him every day for you putting up this video I'm a 67 yrs old woman my husband passed away have been having problem with truck but going to chk it,hugs n kisses to u n ure family-Maria Albuq.,New Mexico
Straightforward and to the point, this is what diy CZcamsrs need to accomplish. You sir just fixed my truck and possibly hundreds of dollars out of my wallet. For about a week now I’ve had some horrible acceleration issues in first and second and it would only pop up when the engine was warm. Idled fine(a bit low at 500) but nonetheless fine, the issue was only from a complete stop and upon accelerating. Changed spark plugs wires, maf, map, throttle body and nothing. Cleaned filter and changed all fluids, oil, tranny, rear differential. To sum it up I thought my tranny was slipping and headed for explosion. I saw your video and sure enough that was my issue(I had an inkling it was air/fuel mixture related) that same hose on a 2017 was in but not “clicked” in. I suspect a body shop I took it too after I got side swiped by a car and I complained twice about the fish eyes they left on my paint. Symptoms happened about a week after…🤨. Anyway, THANK YOU! And keep doing what you’re doing!
Great video. This happened to my 91 Exploder. I just subscribed after 45 seconds of the video because a long time ago a guy at autozone fixed this for me in just a couple seconds. 👍👍
GREAT video!! You provided excellent information that was easily understandable along with the video should allow anyone to be able to complete repairs at home. Thank you
For the last few summers my 2009 Chevy suburban with 204,000 miles would idle rough and stall when slowing to a stop. Found a vacuum leak where two plastic vacuum lines rubbed a hole but still had the idle and stalling issues. Cleaned throttle body and other things found on CZcams. No check engine light but found code P0307. This never showed before. Moved coil and wire from #1 to #7 and coil #7 to #1. Switch #7 and # 3 plug wire. This would tell me what part failed if I got another code. Been a week truck runs great. I’ve changed plugs 3 times since I bought this suburban in 2011 with 60k but never the wires. Found an auto lite video on why plug wires should be changed when plugs are changed. Wires get old and brittle from the heat. Good luck.
Be careful taking it off on older models. I ripped the top boot on mine 02 Tahoe and had to order the entire part with the end boots. Good video bruh! Thanks for sharing!
I have a 2000 suburban with about 165,000 miles not much trouble out of her, but I am experiencing some drivability problems. I will check that line. Cant hurt to try. Thanks for the video.
I have an 05 avalanche with a straight pipe and cold air intake, well I didn't even know this was popped off and after seeing this video I checked and sure enough a similar hose was off. Truck was running fine tho but I recently got a cel for maf and running lean so im sure this will fix that. Thanks man
So, if your vehicle starts and then suddenly stalls seconds later, check your security light to see if it blinks (mine did 3 times) then stays on. If this happens, start your vehicle, when it stalls just leave your key forward, this could take ten minutes or so, but wait until your security light turns off. Then turn your key to the off position for 10 seconds, then start it. This will reset your VATS ( vehicle anti theft system ) to recognize your key again. Thiis was on my 99 suburban. Getting a new one made from the dealer would be a good idea once this happens. Hope this helps!
Your very welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
little rodent chewed thru mine a month ago. didn't notice till the full tune up was done. it needed that anyway. just thankful the critter chose that instead of any wires.
I’m a woman who loves her 2002 Chevy avalanche. I’ve put so much $$ into different issues and refuse to get rib of it. I don’t have the time or patience to study my engine but I can make suggestions to my mechanic. I’ll let him know about this for sure! I also have a oil leak but never see oil on the ground, any suggestions. Thank you ❤️🙏🏾
Truck could just be burning oil, if you see blue smoke going out tail pipe most likely that's where your oils going. Please subscribe & like and share if haven't already and check out our other helpful videos
I am TOTALLY IMPRESSED !!! JUST found this video, my problem is poor gas mileage. 7.5/8.5 mpg Chevy Silverado 1500 2001 !!! But I will check it out !! Thanks for the information.
I’ve got 07 avalanche… fix my stuck lifter afm so when putting things back I replaced the hose. And since you said pushing the pedal to the floor this makes a lot of sense now… lol I’m sure this is why I have a lean…
I bought a 1988 Eagle Premier I believe. Yes I know you are sorry to hear that. Well that was back in the era when Audis were killing people because of rapid acceleration. My story is this the Premier had throttle body injection and to the rear of the throttle body was a vacuum hose that fit into about a 3/8" hole in the intake manifold if I let off turning the key too soon when starting it the engine would frock back and pressure inside the intake would pop that vacuum line out of it's hole most times attempting to start again the line would get sucked back in the hole. Once in a while it did not and when the engine started the computer sensed the mixture was too lean and gave it more gas the faster it ran more gas was given and if you put the car in gear the brakes would barely hold it. I often wondered if later models if a clamp or bracket was ever added and if maybe the same thing might have been happening with the Audis. A fellow worker bought one of those Premiers for a relative and he had heard about the situation with mine and put a bracket on the manifold to hold the vacuum line in place.
That's the vacuum for the fuel pressure regulator on the fuel rail . That hose should never come off ,unless played with or never install right and that's very rare .With out vacuum to the reg. fuel pressure will not increase ,this for sure will cause performance issues .All so check the inside of that vacuum line ,to see if wet from fuel , this would mean the fuel pressure regulator diaphragm is leaking fuel into the engine . This to will cause the engine to run rough at idle . And sometimes you'll see black smoke coming out of the tail pipe . Ever notice car's on the road with a lot of black soot on the tail pipes .. Nice Video.
Mine cracked yesterday, went down the AutoZone bought two different size pieces of rubber hose and pieced it together no problem. Save myself $30 that little part is expensive lol.
When I want to find a vacuum leak I just grab a can of carb spray ...let the engine idle while I spray around all of the vacuum lines as soon as i spray on the leaky spot of vacuum line the idle will raise automatically....
I might check this on my 2002 suburban. After about 1.5-2 hours of heavy highway speeds it just falls on its face. No check engine, all gauges good, fuel and oil good. Just too hot and engine dies. Might see if these are the issues. Also I have an oil leak that I need to track down but the goofy engine is my first task.
My truck does that whining/air sound when u first started it but when I take it off the line the whining stops but when I put it back on it does it again and it doesn’t stop
I’ve been hearing a whistling/hissing noise on my truck that isn’t very loud but you can definitely hear it and it’s driving me crazy cause I can’t find where it’s coming from at all. It’s a 5.3 vortec and runs fine but idles kind of rough. From inside the cab it sounds like the noise is coming from right in front of me from the engine. I’ve sprayed almost an entire can of carb cleaner all around and that hasn’t helped me find anything either. Al of the mechanics around here are swamped busy and want to keep your vehicle for like a week and I can’t afford to not have my truck and not be able to make it to work for that long.
I have a question exactly at 0:27 / 4:28, you see those two rubber hoses that sit near the transmission dipstick, well the hose to the LEFT got knocked down,and im having trouble putting it back on..................any suggestion on how to connect it?
Been here done this . ...when i changed out the knock sensors if your engine is blasting the vacuum lines off youve probably got bigger problems to solve one could be your cheaping out with your mechanic maybe you should buy the fuel induction cleaner or whatever he recommends so he makes some commision and isnt pissed at you for taking up his time for the crappy pay his shop gives him
Your very welcome hope you get it fixed. thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
I have a 2004 chevy suburban that same vacuum hose is cracked at both ends is this causing my suv to stall plus code reader says i have a vacuum leak i think this might be it idk for sure
My avalanche stated to run bad shacking act all funny and it started smoking when I pulled over .. the oil was not Milky and also black carbon in the pips when put my finger in the exhaust.. also I hit the gas a couple times and it smelled like bad gas when it was smoking .. smoked looked white .. . Maybe blown head gasket? Or tps.. what could o check sir
Thank you for your video I have a 96 GMC Sierra 1500 z71 with A similar problem that occurred yesterday and your video led me straight to my problem now my trucks Doesn’t sound like it wants to faint thank you for your video it helped me so much and save me a trip to my mechanic
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Bro you just did more in this video than 20 corporations was able to do ,u are the mfkn man
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Both my 01 suv and 01 pickup started running crazy this week . My truck is making a howling noise for months and running like the fuel pump is going . I’m swapping this line out tomorrow. Crazy part is I didn’t even look this problem up this video just popped up on my CZcams . Life saver
Hope it helps 👍Please subscribe & like and share if haven't already and check out our other helpful videos
God Bless🙏You n ure family! You Are an angel send by God put u in my way I thank him every day for you putting up this video I'm a 67 yrs old woman my husband passed away have been having problem with truck but going to chk it,hugs n kisses to u n ure family-Maria Albuq.,New Mexico
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Straightforward and to the point, this is what diy CZcamsrs need to accomplish. You sir just fixed my truck and possibly hundreds of dollars out of my wallet. For about a week now I’ve had some horrible acceleration issues in first and second and it would only pop up when the engine was warm. Idled fine(a bit low at 500) but nonetheless fine, the issue was only from a complete stop and upon accelerating. Changed spark plugs wires, maf, map, throttle body and nothing. Cleaned filter and changed all fluids, oil, tranny, rear differential. To sum it up I thought my tranny was slipping and headed for explosion. I saw your video and sure enough that was my issue(I had an inkling it was air/fuel mixture related) that same hose on a 2017 was in but not “clicked” in. I suspect a body shop I took it too after I got side swiped by a car and I complained twice about the fish eyes they left on my paint. Symptoms happened about a week after…🤨. Anyway, THANK YOU! And keep doing what you’re doing!
You are very welcome and thanks for comment
Great video. This happened to my 91 Exploder.
I just subscribed after 45 seconds of the video because a long time ago a guy at autozone fixed this for me in just a couple seconds. 👍👍
Thanks for sub and comment glad could help.
Thank you for ending my search for my leak. My line was cracked on the back side. Thank you dude
Your welcome
Saw this video and decided to check mine, and surely enough mine was cracked. I probably never would’ve known, thank you so much for the information!
Great to hear!
Solid advice... I think that may be my problem. I am going to check that out in the morning.
GREAT video!! You provided excellent information that was easily understandable along with the video should allow anyone to be able to complete repairs at home. Thank you
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Thanks for the tip bro,,,, unfortunately some shop n dealers aren't as honest or helpful,,,much appreciated in these days madness
Your very welcome, Glad could help. And thanks for comment and hope u sub.
Hey thanks, I’m going to go check this as soon as I get home today 14 suburban.
Thank you very much for making this video Brother! Nicely done 👍!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
For the last few summers my 2009 Chevy suburban with 204,000 miles would idle rough and stall when slowing to a stop. Found a vacuum leak where two plastic vacuum lines rubbed a hole but still had the idle and stalling issues. Cleaned throttle body and other things found on CZcams. No check engine light but found code P0307. This never showed before. Moved coil and wire from #1 to #7 and coil #7 to #1. Switch #7 and # 3 plug wire. This would tell me what part failed if I got another code. Been a week truck runs great. I’ve changed plugs 3 times since I bought this suburban in 2011 with 60k but never the wires. Found an auto lite video on why plug wires should be changed when plugs are changed. Wires get old and brittle from the heat. Good luck.
Thank you for this video!
Your welcome thanks for commenting👍
Be careful taking it off on older models. I ripped the top boot on mine 02 Tahoe and had to order the entire part with the end boots. Good video bruh! Thanks for sharing!
Thanks for heads up, Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
I have a 2000 suburban with about 165,000 miles not much trouble out of her, but I am experiencing some drivability problems. I will check that line. Cant hurt to try. Thanks for the video.
Your welcome hope it helps👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
I have an 05 avalanche with a straight pipe and cold air intake, well I didn't even know this was popped off and after seeing this video I checked and sure enough a similar hose was off. Truck was running fine tho but I recently got a cel for maf and running lean so im sure this will fix that. Thanks man
So, if your vehicle starts and then suddenly stalls seconds later, check your security light to see if it blinks (mine did 3 times) then stays on. If this happens, start your vehicle, when it stalls just leave your key forward, this could take ten minutes or so, but wait until your security light turns off. Then turn your key to the off position for 10 seconds, then start it. This will reset your VATS ( vehicle anti theft system ) to recognize your key again. Thiis was on my 99 suburban. Getting a new one made from the dealer would be a good idea once this happens. Hope this helps!
Thanks for great tip👍Please subscribe & like and share if haven't already and check out our other helpful videos
Amazing Brooo....Thanks For The Helpful Video
Your very welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
little rodent chewed thru mine a month ago. didn't notice till the full tune up was done. it needed that anyway. just thankful the critter chose that instead of any wires.
Yes they can cause major problems, Please subscribe & like and share if haven't already and check out our other helpful videos
Man you just saved my life mine was cracked and i replaced fuel pump, throttle clean, and some other new parts
You're welcome glad could help.
God bless you man YOU ARE A GOD SEND!!
Much love stay safe
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Thank you Sir! Excellent video
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
I’m a woman who loves her 2002 Chevy avalanche. I’ve put so much $$ into different issues and refuse to get rib of it. I don’t have the time or patience to study my engine but I can make suggestions to my mechanic. I’ll let him know about this for sure!
I also have a oil leak but never see oil on the ground, any suggestions.
Thank you ❤️🙏🏾
Truck could just be burning oil, if you see blue smoke going out tail pipe most likely that's where your oils going.
Please subscribe & like and share if haven't already and check out our other helpful videos
Definitely bout to check. My tahoe been trippin lately and change the fuel filter that a make it run funny too.. Thanks for the vid
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Great information.
I am TOTALLY IMPRESSED !!! JUST found this video, my problem is poor gas mileage. 7.5/8.5 mpg Chevy Silverado 1500 2001 !!! But I will check it out !! Thanks for the information.
Hope u get it fixed. Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
My 06 started idling rough this morning but no check engine light. Got it home before it stalled. Any advice?
Thank you so much for this Video
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Great info!! Really help me out THANK A LOT
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
At least it starts on the first try. Mine always does it on the second
GOOD SHIT BUBBA NO LIE YOU THE GOAT‼️🔥💯
Awwwsome video man thanks for the help!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
So I checked the Description of this video. Just noticed you’re from Kentucky. Well I’m from Kentucky to and you got a sub from me and like.
Ky 👍 thanks for sub and like
Thank you Sir for the video, I'll try that before doing the tune up
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
I’ve got 07 avalanche… fix my stuck lifter afm so when putting things back I replaced the hose. And since you said pushing the pedal to the floor this makes a lot of sense now… lol I’m sure this is why I have a lean…
Thank you
Great job!! Thank you sir
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
I bought a 1988 Eagle Premier I believe. Yes I know you are sorry to hear that. Well that was back in the era when Audis were killing people because of rapid acceleration. My story is this the Premier had throttle body injection and to the rear of the throttle body was a vacuum hose that fit into about a 3/8" hole in the intake manifold if I let off turning the key too soon when starting it the engine would frock back and pressure inside the intake would pop that vacuum line out of it's hole most times attempting to start again the line would get sucked back in the hole. Once in a while it did not and when the engine started the computer sensed the mixture was too lean and gave it more gas the faster it ran more gas was given and if you put the car in gear the brakes would barely hold it. I often wondered if later models if a clamp or bracket was ever added and if maybe the same thing might have been happening with the Audis. A fellow worker bought one of those Premiers for a relative and he had heard about the situation with mine and put a bracket on the manifold to hold the vacuum line in place.
God bless you. It fix my problem. Thank you
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
That's the vacuum for the fuel pressure regulator on the fuel rail . That hose should never come off ,unless played with or never install right and that's very rare .With out vacuum to the reg. fuel pressure will not increase ,this for sure will cause performance issues .All so check the inside of that vacuum line ,to see if wet from fuel , this would mean the fuel pressure regulator diaphragm is leaking fuel into the engine . This to will cause the engine to run rough at idle . And sometimes you'll see black smoke coming out of the tail pipe . Ever notice car's on the road with a lot of black soot on the tail pipes .. Nice Video.
Thanks for helpful tips. Please subscribe & like and share if haven't already and check out our other helpful videos
Just gained a new subscriber brother
Thanks for subbing
i can’t believe i found this video…it’s man says the diag of my truck in under a minute
Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you very helpful
I knew it had to be something like that and it was 👍
Glad it helped
Thank you for the video
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Excellent video!
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Mine cracked yesterday, went down the AutoZone bought two different size pieces of rubber hose and pieced it together no problem. Save myself $30 that little part is expensive lol.
Yes can be pretty pricy, Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you very informative.
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you just found it sure enough fixed
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Excellent Content!!!
Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
Great video brother Thankyou
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
My temp sensor connector was half in and out on engine. It's was stalling and not starting. Simple fix. I glued mine in
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thanks man I'm checking mine soon I got a 09 avalanche
Your very welcome hope it helps👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
When I want to find a vacuum leak I just grab a can of carb spray ...let the engine idle while I spray around all of the vacuum lines as soon as i spray on the leaky spot of vacuum line the idle will raise automatically....
Thanks for helpful tip👍Please subscribe & like and share if haven't already and check out our other helpful videos
Appreciate you good info
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
2010 suburban misfires and smoke coming from exhaust when started after overnight parking.. seems to be manufacturing screwup
You rock brother. Thanks.
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
I've had that happen before too! It got old and heat cycled, cracked. I replaced it with a rubber fuel line and fixed the problem and runs fine now
Thanks for the tip!
Good looking out!!
Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
Hey, i really am liking your videos. 04 GMC Envoy
Glad to hear👍🏿 and to be able to help.
Thanks
Thanks great video!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
I swear i thought Mike Tyson was doing a CZcams video until i seen a white arm🤷♂️
Lol 👍Please subscribe & like and share if haven't already and check out our other helpful videos
My Man!!!! Thank U
Cool thank you 👍👍👍
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
God bless your soul. Thank you.
Your welcome
I might check this on my 2002 suburban. After about 1.5-2 hours of heavy highway speeds it just falls on its face. No check engine, all gauges good, fuel and oil good. Just too hot and engine dies. Might see if these are the issues. Also I have an oil leak that I need to track down but the goofy engine is my first task.
My truck does that whining/air sound when u first started it but when I take it off the line the whining stops but when I put it back on it does it again and it doesn’t stop
I’ve been hearing a whistling/hissing noise on my truck that isn’t very loud but you can definitely hear it and it’s driving me crazy cause I can’t find where it’s coming from at all. It’s a 5.3 vortec and runs fine but idles kind of rough. From inside the cab it sounds like the noise is coming from right in front of me from the engine. I’ve sprayed almost an entire can of carb cleaner all around and that hasn’t helped me find anything either. Al of the mechanics around here are swamped busy and want to keep your vehicle for like a week and I can’t afford to not have my truck and not be able to make it to work for that long.
Sorry but not sure of what your problem could.be. Please subscribe & like and share if haven't already and check out our other helpful videos
you completely fixed my problem
Glad could help Please subscribe like and share 🙏.
Would it run fine in neutral but shakey in drive?
I have a question exactly at 0:27 / 4:28, you see those two rubber hoses that sit near the transmission dipstick, well the hose to the LEFT got knocked down,and im having trouble putting it back on..................any suggestion on how to connect it?
Yeah my 07 Tahoe is making the same noise but more of a whistling sound Hopefully is a easy fix like this vid
Been here done this .
...when i changed out the knock sensors if your engine is blasting the vacuum lines off youve probably got bigger problems to solve one could be your cheaping out with your mechanic maybe you should buy the fuel induction cleaner or whatever he recommends so he makes some commision and isnt pissed at you for taking up his time for the crappy pay his shop gives him
THANKS FOR THE HEAD UP SIR
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Not my issue but very good info to know thank you
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Legend!
Thanks Glad could help Please subscribe like and share 🙏.
07 was actually the start of the second gen. Major differences made.
Thank you sir
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Thank u much brother God bless
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
You the man 💯
Glad could help please subscribe like and share.
What’s that line called ?
Thank you I’m pulling the hoses from my wife’s cars now.
Your very welcome hope you get it fixed. thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Gentleman is correct with this issue it does happen to all older avalanches
👍
Will smoke also come from the tailpipe?
Thank you!!!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
I have a 2004 chevy suburban that same vacuum hose is cracked at both ends is this causing my suv to stall plus code reader says i have a vacuum leak i think this might be it idk for sure
The boots also crack on the fuel pressure regulator vacuum line
My avalanche stated to run bad shacking act all funny and it started smoking when I pulled over .. the oil was not Milky and also black carbon in the pips when put my finger in the exhaust.. also I hit the gas a couple times and it smelled like bad gas when it was smoking .. smoked looked white .. . Maybe blown head gasket? Or tps.. what could o check sir
Diy thanks pure heart
What is the actual name of the thin line you removed ?
Bro are u from St. Louis plus appreciate the video
Midwest your welcome
Would it cause a check engine light up?
My passenger bank is showing low voltage how can I fix that
I have a 2000 chevy tahoe and the the gas pedal sticks what can I do about it?
Will it make your truck power down were you have no throttle
FLASHBACK502:
What The Huge Vacuum Leak? 2003 GMC 2500HD Vortec. What’s This Line Called??
AutoZone & O’Reilly??? Thank you 🙏🏼😊.
Preciate u OG
Your welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Been looking for the name of this little tube, any help for the name of it?