You should try phase-change material Honeywell PTM7950. It comes in as a sheet, lasts longer, performs works better than traditional pastes and there is no pump-out effect. On the power section (vrm) and vrams I advice to give thermal putty Upsiren UX Pro. It is also a good idea to do undervolting.
9 seconds: nvidia rx... Edit: about the LED connector, it's very difficult to remove without to damage it, happened to me too! It's very fragile and the mounting position is not the ideal! Thanks for the video! Good job!
Haha yes i was trying to remove and i damaged the connector , and after i removed the pin that cable disconected and catch again with cable and than i put it back to plastic connector i did it as it was like factory 😅 now this GPU im using for 24/7 encoding video for TV station Streaming, using OBS studio and its on perfect condition, 60% in use. This Revision that i did was great 😊 Thank you for your comment Do you have the same model?
I have the same GPU and I am having problems with it, my monitor keeps on flickering on and off, I have the latest driver for the gpu but the flickering doesn’t stop. Flickering is too frequent that I barely see my desktop. Will this help?
Make sure my friend tha you feed enaugh power to this gpu to make it work well i use this connectors : 1. Dual 6 Pin Female to 8 Pin Male, GPU Power Adapter Cable amzn.to/43GW6Qo 2. SATA Power to 6 Pin PCI Express Video Card Power Cable Adapter amzn.to/3rHuZHQ Or Molex to 6 Pin Video Card GPU Power Supply amzn.to/3QeEjNA
@@Tips2Fix I am already giving it enough power, before there were no issue, I just left it open then when I came back this flickering started to happened. I've been using this gpu for almost 5 years. I was using display port and switched to hdmi to see if the issue was on the cable but its not. I already change the thermal pads of gpu and the problem persists. I don't know if the whole gpu is the issue or the monitor. but I tested the monitor using my ps4 and this never happens. What could be the possible issue for this experience?
no , you have to combinate like i'm doing , in order to make your gpu work well you see you need to use exact pads thickens like original have very important
Nice tutorial, thanks !
Thank you bro
Great demonstration!
Thanks!
Glad it was helpful!
Thank u , i have exact same model, i was looking for this video!!!!
Glad I could help
Let me know now after you did this ‘operation’ how it goes for you?
@@Tips2Fix yes i will let you know
👌👌👌
You should try phase-change material Honeywell PTM7950. It comes in as a sheet, lasts longer, performs works better than traditional pastes and there is no pump-out effect. On the power section (vrm) and vrams I advice to give thermal putty Upsiren UX Pro.
It is also a good idea to do undervolting.
Thank you for sharing my friend :)
9 seconds: nvidia rx...
Edit: about the LED connector, it's very difficult to remove without to damage it, happened to me too! It's very fragile and the mounting position is not the ideal! Thanks for the video! Good job!
Yes thats right , the position its not ideal , you are welcome bro , thank you for your comment
Touching the die with screedriver, damaging the conector 😂 good fix
Haha yes i was trying to remove and i damaged the connector , and after i removed the pin that cable disconected and catch again with cable and than i put it back to plastic connector i did it as it was like factory 😅 now this GPU im using for 24/7 encoding video for TV station Streaming, using OBS studio
and its on perfect condition, 60% in use.
This Revision that i did was great 😊
Thank you for your comment
Do you have the same model?
So i can clean fans without having to mess up with pads and paste ?
The thermal paste needed was half as much. It is enough to apply only to the crystal itself, before applying, treat the surfaces with alcohol 😉
Thank you my friend for sharing your tricks with us 😍
Ah, Nvidia makes Polaris GPUs now? :)
Did you also hear about this new Intel Zen-9 7950X-K? Its a beast.
He has Nvidia RX590 by Sapphire 😂😂😂
where do they get these gpu's from🤣🤣😭😭@@ShirOwOkun
All depends on how old your card is. Think my oooold R9 200 is just paste on the heatsink no pads. Will find out later when I pop it open later.
thank you for your comment, ,let me know latter
I have the same GPU and I am having problems with it, my monitor keeps on flickering on and off, I have the latest driver for the gpu but the flickering doesn’t stop. Flickering is too frequent that I barely see my desktop. Will this help?
Make sure my friend tha you feed enaugh power to this gpu to make it work well i use this connectors :
1. Dual 6 Pin Female to 8 Pin Male, GPU Power Adapter Cable
amzn.to/43GW6Qo
2. SATA Power to 6 Pin PCI Express Video Card Power Cable Adapter
amzn.to/3rHuZHQ
Or
Molex to 6 Pin Video Card GPU Power Supply
amzn.to/3QeEjNA
@@Tips2Fix I am already giving it enough power, before there were no issue, I just left it open then when I came back this flickering started to happened. I've been using this gpu for almost 5 years. I was using display port and switched to hdmi to see if the issue was on the cable but its not. I already change the thermal pads of gpu and the problem persists. I don't know if the whole gpu is the issue or the monitor. but I tested the monitor using my ps4 and this never happens. What could be the possible issue for this experience?
When I starrt my pc it takes minutes like 5-10 minutes before the flickering starts and non stop.
@@Kyah_Honradois it fixed?
Try to underclock your gpu
thank you bro i actually change pad and paste and it getting worse maybe i put wrong models on pad smh 🤦♂️
Yes you have to be carefull you have to put exactly the same size thats the reason why i use caliper to measure
Sir what happend if you replace a wrong thermal pads in gpu?
It will not cool enaugh your gpu , thiknes its important
If you use thermal paste instead, it will work?
no , you have to combinate like i'm doing , in order to make your gpu work well
you see you need to use exact pads thickens like original have very important
Will the pads size be the same as the pulse version?
do u find out?
Оказываеться лизе су ещё и Nvidia принадлежит)
😚 "Promo sm"
Really missed a temp test before and after..
Its better bro, now gpu works beter than before
And the temperature its mangaed better will not stay all time hight
I thought so :)
@@Tips2Fix
It is not nvidia it is a amd product
Yes haha
Do a video on how to install MS Office free please... Bro
You don't even know NVIDIA from AMD.