3D Origami Dragon Tutorial
Vložit
- čas přidán 9. 07. 2024
- In this video, we are going to make a very nice 3D origami Flying Dragon, which looks very cool and is not hard to make. It's made from 424 black, 92 yellow and 11 yellow 1/64 pieces.
Check out the original model and inspiration for the tutorial - www.etsy.com/listing/22306248...
3D origami T-shirts - spreadshop-admin.spreadshirt....
⏭ TIMESTAMPS ⏮
MODEl - 0:00
THE HEAD - 0:07
THE BODY - 1:41
THE TAIL - 2:54
THE WINGS - 3:15
THE MOUTH - 7:52
THE SPIKES - 8:33
▸ How to make the Pieces - • EVERYTHING about 3D or...
▸ 3D Origami Black Widow Spider - • How to make a 3D origa...
▸ 3D Origami Rose - • How to make a 3D origa...
▸ 3D Origami Black and Yellow Swan - • How to make a 3D origa...
▸ 3D Origami Tutorials - • 3D Origami Tutorials
❗ ❗ ❗ USE GLUE FOR ALL MODELS
➖ PAPER FOR 3D ORIGAMI AND OTHER SUPPLIES YOU CAN USE ➖
🔸 US Region - www.amazon.com/shop/3dorigami...
🔸 UK Region(+25 countries) - www.amazon.co.uk/shop/3doriga...
🔸 Canada - www.amazon.ca/shop/3dorigamiv...
🔸 Germany Region - www.amazon.de/shop/3dorigamiv...
🔸 France - www.amazon.fr/shop/3dorigamiv...
🔸 Italy Region - www.amazon.it/shop/3dorigamiv...
🔸 Spain Region - www.amazon.es/shop/3dorigamiv...
➖ SOCIAL MEDIA ➖
🔴 Facebook: / 3dorigamivideos-317089...
🔴 Instagram: 3dorigamivi...
🔴 Twitter: / 3dorigamivideos
🔴 Pinterest: / 3dorigamivideos
➖ DONATE TO HELP ME MAKE MORE TUTORIALS FOR YOU TO ENJOY ➖
❤ PayPal: www.paypal.me/3dorigamivideos...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make tutorials. Thank you for your support!
#3dorigamivideos #3Dorigami #3DorigamiDragon - Jak na to + styl
Check out this 3D origami Black Widow Spider as well - czcams.com/video/27zYvbYft7k/video.html
3dorigamivideos where do you find A4 paper it’s so HARD to find
.
@@azucenagarcia6813 There are links in the description to some paper that is good for 3D origami, just choose the link that is for the country you are living in.
@@azucenagarcia6813 just cut a a3 in half
lee
@@rbfromuae jjjj
(note to self)
HEAD:
Black - 31
Yellow - 4
BODY:
Black - 74
Yellow - 5
TAIL:
Yellow- 7
WING 1-
Black - 158
Yellow - 37
x2
MOUTH:
black - 3
Yellow 1/64 - 1
SPIKES:
yellow 1/64 - 10
Total number:
Normal pieces: 514
1/64 pieces: 11
❤
Yassss success! It ligit took me 16 hours straight, no sleep, approx 10 minutes in the bathroom, to finish this, and just eating while making pieces, and drinking occasionally... but I did it! And it’s only my second 3D model! Tysm!
So glad to hear your success story, keep up the good work!
3dorigamivideos omg hi! Also how long approx does something like this take you real time? I’m curious
@@amethyst354 Well I would say about a day with making the pieces.
3dorigamivideos whoaaaa nonstop?
@@amethyst354 Yes, the pieces should take me 3-4 hours and assembly with glueing the model 2 hours probably.
fantastic model and a clear video - thanks!
Awesome flying dragon design. Great skill and talent . Super 👍😍
Beautiful work! I wouldn't even think about doing this without glue.
Thanks you very much bro this is the most coolest 3d I saw on CZcams five stars
Cool! Maybe I will try with purple and blue in stead of yellow and black... I have never ever tried 3d origami before... I'm so exited!
very awesome, i followed your instructions, and now i have another cool origami figure!!! TY
Holy ur mad crazy man it took me 12 hrs non stop making pieces
So cool! Im almost done with it!
Worked out super well. I love the result🤎🥰
Круто! Дуже гарний дракончик! Я рада бачити що культура модульного оригамі ще жива! Дякую вам за цього гарненького дракончика і чудовий настрій.❤️❤️❤️❤️
Thank you for the video, I made this in 2 days. You're much faster! Much appreciated. Gonna be a great gift.
Glad that you enjoyed the video and the final result turned up well!
If you want to showcase your model, you can send it to me on my Instagram and appear in a "community models" story
but how do we get the pieces like what's the different between normal and 1/64 pieces?
See this video czcams.com/video/bniriKJ2hLA/video.html. Its help me soo much.
lots of hours but it was fun to complete. for the final touch i ended up mounting LED lights to the dragon.
Its amazing origami
Very nice 👌👌👌keep rocking 👏👏👏
the description says i should use glue on all my models but i dont know where exactly, is it on every layer or some specific parts? as the video doesn´t say it i supose is on every layer but don´t want to overglue the model :(
so far, I have made the body of the dragon and I have been using hot glue for underneath. i make portions of the dragon make sure it's right then I glue .
This guy did so much hard work for this so I subscribe for him and like this video
This is the best thing i have seen so far
gg
How do you also think of these ideas?
very beautiful 😍
Cutted pieces or full sheet?
Where do you find how to make it
I love this idea
what is the cm of 1/16 cm2?
Q foda 😀👏🏻👏🏻👏🏻👏🏻
How to do the pieces??
I like it❤
acabei de fazer esse, usei papel reciclado e as asas ficaram muito pesadas 😅, mas não têm problema se ele não sair da minha estante
So cool only problem is i dont have the amount of patience to do this
I like it so much with it, but only the yellow ones are 1/64 or the rest of the colors?
Hello, you need only 11 yellow 1/64 pieces which are for the spikes and one for connecting the mouth. Hope this helps!
@@3dorigamivideos Thank you
hey, bro tell me the size we don't know the size what you have used.
PERFECT!!!! THANKS MEEEN
what is a yellow 1/64?
How did you made those triangle shaped thing?
What do you mean with 1/64 ?
It is 1/64 of a standart A4 paper
How much yellow is that?
Beautiful💕💖🎉♥️💗❤️
Thank you!
Great great!
Do we need to curve the 1/64 papier?
Thank you so much for the video, also I wanna do it but I don’t have black paper , will it look good if I did it with white and yellow instead???
i don't know if this helps but im using 4 different colors and its coming along quiet well
OMG That's a RAXIORE DRAGON
Ooooooooooooooooooooooooooops 😮😮😮😮😘😘😘👌
4:45
Boa noite queria que esplicasse o passo a passo seria interessante, obrigado
wow
Cuantas hojas de cada color necesitaré?
What is 1/64 in cm
Are normal pieces 1/32 or 1/16?
Hi, normal pieces are 1/32 size.
Thanks, just started making it :D
Cuantas hojas se ocupa para todo ?
Hi bro
Can u show me how to make these all small pieces in video
As u have not showed how to make those small pieces
How do i make the second wing?
It’s the same as the first just backwards kinda
thought there werefeetbut still cool though
How to make the pieces
Does it require Glue pls respond fast
You should have made legs of the dragon
I make it :)
Estaría bueno que lo hagas más lento
What size paper size you
A4paper
3:23
?
Masomenos cuántas piezas se necesitan😣
Ik this is a stoopid question but are the black pieces supposed to be 1/32 I'm new to this idk pls reply fast
Cry
4.45
yellow and black modules of what size?
The size of the pieces are 1/32 of an A4 sheet of paper, except for the spikes on the back which are 1/64 as mentioned in the video.
THE WINGS 5:16
how to make the triangles
Hi, there is a link in the description of the video, hope this helps!
just look up how to make 3D origami units
Please make the small parts
1/64
Please make it fold origami
What is 1/64?
I don’t understand same :/
Cuales son las medidas? En centimetros
Gg
How make pieces???😭
The pieces is burn to the dragon
How about make a wolf
Can I made this with a newspaper ❓⃢❓⃢❓
abi o ufak kağıtları nasıl yaptın
mais combien il faux de petite origami noire et jaune🤔🤔🤔🤔🤔🤔🤔
Make a phoenix plzz
Data alot of pieces
Que significa 1/64 -11
Please make me a sowd please
mine keeps falling apart
Idk how to make the spiky things
Very fast... ;(
Slow it down💀
lee