top man you sorted it for me, me about with the wires disconnecting them and s*&** and it worked after months of me unplugging my radio, thanks a bunch dude
Any fix for teys lux one on audi a4 b8? Mine turns the screen off but its bot shutting down, killing my battery. All plug, firmware update, canbus selected the correct car model, nothing works.
Seems like this did the trick for me. Something that still bothers me is that I’m not sure if the battery still gives power to the device (even when engine is OFF), because a quick restart of the car doesn’t seem to completely restart the device as it loads up exactly as no restart had happened.
When engine is off it is supposed to go into sleep mode. In sleep mode it uses very little power couple watts, maybe less. You can however change this in settings so it never goes into sleep mode and fully powers off or powers off after two hours of being in sleep mode.
Hi the 64gb model is in stock now x-streamaudio.com/collections/new-arrivals/products/copy-of-10-jeep-wrangler-jk-jku-android-10-plug-and-play-4-64gb-wireless-apple-carplay-android-auto-dsp
@@justin6822 just watched it again... mine was a different issue. I thought he was removing the whole head unit to disconnect and reconnect the power (which is what mine needed to fix the same symptom, which I could do by disconnecting the battery for a few minutes). But realised now he was disconnecting some leads and leaving them disconnected? Ok... weird, but whatever works :)
Clip the red and orange wires round the other way, (wrong way) So instead of having red to red and orange to orange you will have red to orange red to orange.. See if this works?
@@SOLIDIUS36 it would appear I was sent the wrong canbus module. The one I got was 20pin for Ford. Just check yours and get back to me. (They sent me 2 of the correct ones in error once I figured out the problem)
2 flat batteries later I found this video your a legend all working now
Will it work for me
Thank you. No talking, just straight to the point. Absolute legend. ❤
The only method that worked. Tried changing cables and from settings nothing worked but this. Thanks bud.
What a great video man! You saved me ton of work, to get power from lighter below. Didn't know all I had to do was to remove these 2 cables.
thanks for sharing this. I was scratching my head trying figure out what was happening with my new radio.
i wanna give you a hug man , i’ve literally been trying for months thank you man
What a G. I've been watching and reading all forums and this was all I needed. Amazing.
A fooking king of kings right here!!! Straight to the point! Thank you so much bro!
This worked - all I had to do was undo a connection that probably came that way, connected. You are the man!
Amazing omg saved the family car. Thanks so much! There literally was a label saying on it " no contact "
Thanks man, you saved me from charging the battery every 3 days.
Thank you sir! I was stumped as I don't deal with car electronics usually and the included instructions weren't very clear. Now I can sleep 😅
Wow. You’re so helpful thank you for helping me! Everyone said to unplug red wire. No one said to connect the canbus! It works!
You are a legend man. Golf issue now fixed
Hello, what model of VW Golf do you have? Thanks
top man you sorted it for me, me about with the wires disconnecting them and s*&** and it worked after months of me unplugging my radio, thanks a bunch dude
thankyou bro it works !!! GOOD JOB !!!
Does it work also on a mk4 golf with a radio harness adapter?
Hey is that orange and red wire on the harness from the car Side right?
Dude you are a legend! 🎉
He is the best so far
Great video thank you it really helped it saved my radio from breaking 😂
What does the red and orange wires do?
Perfect thank you saved my life ny cars battery kept dying on me
Would this work on volkswagen scirocco 2010
thanks a lot for sharing that! it helped me!
Thank you so much
You saved me
Solved for me, ur a legend
Thanks, saved my live
Any fix for teys lux one on audi a4 b8? Mine turns the screen off but its bot shutting down, killing my battery. All plug, firmware update, canbus selected the correct car model, nothing works.
This is a nice trick. Thanks😉❤️
This did it, thanks man !!
you are a hero
Legend
I have the same radio will it work
Life saver!
What kind of stereo was that ?
Dude you saved me bless you thank you so so much give me your cash app or something I owe you a beer for this one I was going crazy
thx bro!)
I’m having the same problem but disconnecting them is having no effect and it stays on anyone know what could be causing this
You ever find out the issue, I tired disconnecting as shown in the video but still had no luck…
Sorry mate I did sort it by snipping one of the cables but unfortunately I can’t remember which one it was and no longer have the car
Seems like this did the trick for me. Something that still bothers me is that I’m not sure if the battery still gives power to the device (even when engine is OFF), because a quick restart of the car doesn’t seem to completely restart the device as it loads up exactly as no restart had happened.
When engine is off it is supposed to go into sleep mode. In sleep mode it uses very little power couple watts, maybe less. You can however change this in settings so it never goes into sleep mode and fully powers off or powers off after two hours of being in sleep mode.
@@k7ywhat is the security pass?
@@slobodanslobic Depends on head-unit manufacturer. Usually it's 0000 or 8888 or 1234
Thank you !
Thank you sir
Thanks buddy 😊😊
When you disconnect wire will radio still hold memory for stations etc?
Yes
What if it doesn’t have that connector on the wires? Which ones do you cut?
Mine does not have a the red wire connector as well :/ we’re you able to figure it out?
Did u cut the wires
Thanks !!!!
Just done this on mine, I knew I needed to sort the switch live but couldn't work out the wiring, weird how the switch live is part of the canbus!
I cant believe it was that simple... What exactly did I just disconnect?
I have this connected, but if i disconect the radio is mog turning on anymore, i have caddy 2011
Thx!
Hi any idea when the 2017 model for the Jeep wrangler will be back in stock?
Hi the 64gb model is in stock now
x-streamaudio.com/collections/new-arrivals/products/copy-of-10-jeep-wrangler-jk-jku-android-10-plug-and-play-4-64gb-wireless-apple-carplay-android-auto-dsp
Use discount code xstream1 for 10% off
The 32 gb model will be back in stock next week
@@audiovisionusa thank you just purchased!
@@ossiecarlos thanks! Please let us know if you have any questions when it arrives
You save me thanks
You will live long
Legend
To kralju
thank
What about just disconnect the battery for a while?
what?
@@justin6822 huh? Disconnect the car battery terminal at the battery. That will reset the head unit without removing anything.
@@labibbidabibbadum I just don't see how that would really fix anything
@@justin6822 just watched it again... mine was a different issue. I thought he was removing the whole head unit to disconnect and reconnect the power (which is what mine needed to fix the same symptom, which I could do by disconnecting the battery for a few minutes). But realised now he was disconnecting some leads and leaving them disconnected? Ok... weird, but whatever works :)
My car doesnt come the android logo
I have a similar radio for my ford mondeo 2010. My radio wont turn on unless those are connected
Same with my VW caddy... it won't turn off if they are connected but won't turn on if they are
@@smodjephace same here
Same here, anyone work out why
Clip the red and orange wires round the other way, (wrong way)
So instead of having red to red and orange to orange you will have red to orange red to orange..
See if this works?
@@leonvince2545I had this same problem, switches them round and everything worked
If i disconnect this cable my radion turn off
Vw caddy. Wont turn off if they are connected, wont turn on if they're not... im getting no information from canbus either
Same here.. almost about to install a toggle?
@@SOLIDIUS36 it would appear I was sent the wrong canbus module. The one I got was 20pin for Ford. Just check yours and get back to me. (They sent me 2 of the correct ones in error once I figured out the problem)
Plain hero
Thank you!
Thanks !
Thank you!