The first time I made a diy flex sensor it didn't work,but then I checked the resistance (1 megaohm) Which was way too much so I remade it with 12B pencil lead which is a much better conductor than 2B,I drew it on a piece of paper until it was black in place of velostat
@@TremixNeo I really want less resistance..I used 6B...I will use 12B...I use sulfan instead of copper. Could it be the reason that the resistance is big and did you use A4 paper?
@@nadasaad2708 as long the resistance of the sensor is around 15k ohms its good, you just need to play around with the resistance of the voltage divider so that its more sensitive in my case, yes i used A4 paper
It is interesting. Add back ground music 🎶, it may be make a video beautiful
Actually helped me a lot! Thanks!
What is the black sheet? I make flex as you guide, but it doesn't work. Could you tell me any notice when make it?
Its velostat
The first time I made a diy flex sensor it didn't work,but then I checked the resistance (1 megaohm)
Which was way too much so I remade it with 12B pencil lead which is a much better conductor than 2B,I drew it on a piece of paper until it was black in place of velostat
The resistance should be around 40k ohms to 15k ohms
@@TremixNeo I really want less resistance..I used 6B...I will use 12B...I use sulfan instead of copper. Could it be the reason that the resistance is big and did you use A4 paper?
@@nadasaad2708 as long the resistance of the sensor is around 15k ohms its good, you just need to play around with the resistance of the voltage divider so that its more sensitive in my case, yes i used A4 paper