Skills for Psychological Recovery Bulldozer SHANTUI DH17 Stuck In Deep Sand Safety Work
Vložit
- čas přidán 14. 04. 2022
- Hello Guy!! Best technique skills and experience rescuer heavy bulldozer SHANTUI DH17 stuck in deep sand skills working it to terrible recovery.
Recovery by excavator CAT 320B and Bulldozer SHANTUI DH17 safety work.
Please enjoying videos!!
Thank you so much for watching videos, Please SUBSCRIBE, LIKE, COMMENT SHARE Videos for more heavy equipment movement videos from our channel
At least they're all wearing their safety sandals.
Lesson of the day:
If you're stuck, remove all stickers.
The transition from water buffalo's to bulldozers does not happen over night. HA HA HA.
You tube , siempre nos ofrece tremendos programas instructivos. Gracias You tuve.
Damn I know you can hear that horrific squeaking. Grease is a hell of a lot cheaper than changing parts.
That's what I was thinking.
Grease, word of the day. lol
NotMyJob/10
Yeah and I think idiots like that working there a swamp or a river? I need their head examined I need to learn where to work where they're not going to drive over a cavern of water and drop into it
Seen the price of grease lately, and that’s if you can find it
Why didn't they take the stuck one out of gear? Or at least put someone in the cab holding down the declutch pedals.
unlock the tracks, neutral is good
These guys obviously aren't the sharpest tools in the shed
@@ronbusby4596 flip flop crew
Their language doesn't have a sufficient range of words to adequately figure it out, they can see it in their "minds eye" but it somehow just gets lost in translation, whatever you do, don't ask them if the chicken came before the egg or the other way around, or they will probably end up sitting in a corner plaiting their own shit in despair while intermittently laughing, kicking and farting all at the same time 🥵😂
Can you believe this is really true..
@@dalekellogg2585 they're ! get her to move!
To rescue the machine in the best way, you need to dig a deep hole next to the machine so that the water can flow down there and then take all the sand out of the machine, you can pull the machine up more easily.
O que feys és maqe yes buriaco.
The cable should be attached to the excavator bucket. But really the hoe can pull it out on its own without a cable.
Unless you have a high water table!
I love to watch the guy in the pink shirt! Both units are pushing and pulling for all their worth and he stands there waving them on like they need his instructions.
With that helmet on I doubt he even worked for them lol
They always have many guys signaling at once, it makes them feel like big shots
What a couple of idiots!
This isn't just a video; it's an experience. You've successfully woven technology and nature into a captivating narrative.
That was a tough job, the recovery of the tractor....🌼🇵🇰🌼💞😂🏏
It seems to be a lack of grease for the cat excavator
Shortly they will be complaining it broke some pins!!
Obviously not owner operators
I'm amazed they did not drain the water out and then check all the fluids make sure there's no water in the oil or the engine air cleaner and start the darn thing up and then pull it out and then pack in the dirt behind it with a nice slope would have made the job a lot easier I'm amazing the chain or cable did not break and kill somebody.
Once it sucks water in, it's off for a rebuild. It bends or breaks rods. Any water is too much for the starter to overcome.
Wow, I love their safety shoes
🤣
Steel toe sandals
Sono sempre a bagnomaria
Proudly presented to you by work safe……hi vis, steel caps and common sense
ESTOS SEÑORES SON UNOS EXPERTOS MAQUINISTAS , TENER MUCHA PACIENCIA Y TRABAJAR EN BUENA COMBINACIÓN , ES LA CLAVE DE EL ÉXITO. FELICITACIONES , POR UN PROGRAMA TAN INSTRUCTIVO. GRACIAS .
TO SO DEBILE! KITAICE DO ,CAPY, NIE DO MASZYN!!!! IA 40 L KOPARKO IEZDZE !!!!!!TO SO GŁOMBY!!!!!!!!
😢ZAWALYC DEGO DEBILA !!!!
Yes! Mr Caterpillar would have been saying "Give it heaps, boys, and when you finally manage to bust it, I'll happily sell you another!" I was waiting to see the washdown and the tracks freed but neither happened. We should appreciate that not all others operate machinery as we do ... they must make do with what they've got.
Repent to Jesus Christ “I thank my God every time I remember you.”
Philippians 1:3 NIV
F
@@repentandbelieveinJesusChrist3 - - - what a joke ?
It's not about knowing one's limits. It's about knowing your vehicles limits and this is one way of learning that lesson.
yes i agree you hit it on the button bro is knowing your limits 👍👍👍
If they even knew "what is a grease gun", is questionable
Repent to Jesus Christ “I thank my God every time I remember you.”
Philippians 1:3 NIV
@@repentandbelieveinJesusChrist3
Nothing to repent from but sick evil men of religion cults. Sin only exists in the evil hearts of men that want you to believe sin exists. Love is the way and nothing else! I rebuke YOU in the name of love. lol!
@@repentandbelieveinJesusChrist3 Evangelicals are a big part of what's wrong with the world today.
Amazing Recovery!
very very smart and supportive of each other !
The CAT escavator Is one great piece of equipment
Especially when screaming at you. 😳 Evidently not only do they not know how to run equipment they don't know what a Grease gun is
I enjoyed this video on what not to do ever, wow , I'm speechless. Glad nobody died because if that cable had broken those 2 guys would be 4!
In the third world, it is not a big deal, they are easily replaced and no one is getting sued or fined. They do not care about safety, that is why no one has a hard hat and everyone is wearing flip flops at the construction site.
You and both were worried about cable lash. We had similar problem and ended up pumping compressed air under it to break the vacum.
@@ccmer1956doc That, here would have made things worse.
It must have been his first day on the job, because to mess things up that badly you need some really special skills.
Oh, there are a few US rescues with supposed “experienced” operators that certainly parallel this debacle.
And his last
probably a government job. they all qualify
7p
Ohh really. I\I am a Photographer And a few months ago I was on a new construction site looking for unique shots I stepped onto what looked like somewhat solid ground
NOPE Almost like quicksand Sunk up to my Knees and if it where not for the solid ground that I just stepped off of Who knows what issues I would have had
Why not releasing the final drive breaks manually to put the gears ⚙️ on neutral so that towing can be done with ease
exactly
that would make for a simple rescue and no video
As an ex-Caterpillar and Komatsu sales guy I cringed the whole way through this. Incredible how many bad practices and safety standards they broke. And clear to see the value of well-made gear - this stuff looks like made of TIN.
but at 33:20 - gushing hydraulic oil from raising the blade by force - wow.
and sitting watching - where you could be cut in half - - not-so-smart-fella's but I could not believe they all stood beside the 320 SHAKING the cable - with the CARBODY of the excavator. Like - Oh My God - and all the while - the dozer's tracks still locked. (I guess getting the engine restarted once dry - - was still impossible? Better to risk cutting a few guys in half? Entertaining...)
And they never did get the tracks unlocked - they just moved the site - around the dozer and drug it out.
Gosh - this looked so unsafe ... so unsafe .... and the machines did look like they were made of tinfoil ...
is there a release mechanism for the tracks???
Shake Hands with Danger.
They don't care about trash too.
Well grammatically speaking, if they quote "broke bad practises" then following the rule of negation, that means they did well?? 😉
Can you imagine the fuel bill for all those pieces of heavy equipment to be involved with this cluster f*ck. Nothing like some rubber neckers sitting there waiting for steel cables to snap and send their heads rolling. Not a hardhat in sight and everyone barefoot. OHSA, we don't need no stinking Osha. There is even a woman standing on the edge with a toddler in her arms.
The boom on the excavator sounds AWESOME!
Ever heard of grease???
The excavator operator was pretty good.
Bulldozer telumpur
when we get stuck in USA we dig around it like you did but get to the side of the dozer and take track hole bucket and grab the side of dozer blade and pull it around where the blade is facing out of the hole and get in front of dozer and pull it out with track hole bucket
This guys have wonderful skills 😳🤔😒😉
Es el animo que te d tu compañero cuando estás agüitado un taco te ofreció 🇲🇽🇲🇽✌️
Try some grease on those trackhoe pins. All you have to do to raise the blade is put it in float and not disconnect the lines.
Yes needs grease
It definitely doesn't sound like it has regular scheduled maintenance done.
They should dig that dozer in a little deeper, bury it and say it was stolen. Ive heard that model isn't worth a shit
Pretty gutsy backfilling that hole and putting the other dozer out on it. Could have been a twofor day
that had me nervous, too, Lol
That excavator operator is some pro there.
If he was a pro he would shut that machine down and grease it for Pete's sake!
Nice work boots!
Something happened to the transmission or final drive because the track wasn't free-wheeling. "Oh! Neutral? You didn't tell me to put it in neutral?"
I'm sure the boss was happy
See this. Lol.
The pilot of the second bulldozer is very clever.
频道非常好!谢谢!!
Sucesso total✨,isso é o que importa…….. o resto é papo furado de quem não entende nada e fica dando palpites sem importância alguma🤔.
PARABÉNS para a equipe do resgate✨💪🏽
Someone should tell these people about grease gun's and how they should be used all the time
Try ...Try.. until you succeed . From Tamil Nadu India
And thanks for pulling the decal
Might be a stupid Question but did anyone think to take it out of gear and chain the blade up?
Nope, that requires brains, which these guys are clearly lacking😀😀
I dont know maybe im not smart but i would have done the same and fill sand all around the machine but then dug a deep hole away from the dozer so that all the water would have a place to go then clean all the mud away from the tracks and blade to free it up and possibly drive it out with a tow
Just seems like alot of wasted man power and resources
And for the love of god grease the bratings and joints
looks like everyone forgot their work boots, safety vests and hard hats at home today.
John Norris.
"Badges."
"Badges ?"
" Vee don't need no Stinkin' Badges !"
Man, wish I could wear flip flops to the construction site.
I would think putting the tracks in neutral so they rolled instead of dragged would have made things MUCH easier.....I'm just sayin
Neutral.....🙄
Last time I checked there’s no such thing as free rolling tracks
Neutral? 🤦♂️
UK UK i you
Yes, releasing the final drives by pulling the stub axles. I think I got Dumber watching these monkeys..
You know? with all the filming done, why not show3 how the dozer got in there in the first place? would love to see that!!!
Ok à
Possibly inexperienced operator
Прозевал вспышку и засадил по самые помидоры. Теперь год отрабатывать будет😏
I enjoyed watching the recovery.
Somos. Colombia gente con. Ideas. Felicitaciones
yet another 50 chiefs and two workers
Nothing runs like a rental!
Hadir, nyimak mas
Dah dalam sekali masuk excavator nya
NUMBER ONE IS NOW NUMBER TWO ! ! !
I just can’t believe that nobody has thought about putting the transmission in neutral on the dozer that’s stuck. Heavy equipment and vehicles move a lot easier, if the transmission is in neutral.
Absolutely - or better yet do what is needed to start the engine and drive it out 🤷♂️
بك لن جقدامبيل برب تخرج
they never did put the tracks to freewheel...
I guess it must be an etiquette not to check another driver's mistakes but I sure as hell would have jumped in that cab and make sure the transmission was in neutral and no braking was on. I never saw the tracks move on the stuck dozer.
If its a hydrostatic trans it will not move unless the engine is running. The only other way would be pull the finals out of the track drives
You had all that time, you could have spent it getting it running again which would have been a big help.
Very good job from Fiji lsland
heavy equipment and flipflops... nice.
This was not as fun to watch as I expected. I agree with the things other commenters said. GREASE the excavator pivot pins! Put the tracks in neutral. Tie the blade up, it was acting as an anchor. The dozer guy finally got that right ideal. The dozer operator dug into the sand often, but did not get stuck. It makes you wonder what colossal negligence it took to get it stuck so bad in the first place. They never tried to start it after it was out of the muck, was the engine destroyed?; seems likely. ALOT of work and I wonder who paid? Any disaster is caused by a chain of bad decisions, break any link in the chain and the accident does not happen! I got fired because I lost a new shovel on a job laying underground cable. What will happen to this guy? OH, and I am still have memory issues.
You rightly on the point sir!
That's also my thoughts.
It must be in neutral to rolling.
And of course it must be blade up.
What a disastrous command they have!
We are dealing with shithole countries here though.
Ok
Hay quecinchat!!!
How did the dozer went there @ the first place!!?
I ENJOYED WATCHING THE VIDEO 😊
I think this was a very grand attempt to entertain viewers to have a laugh!
It would be interesting to know exactly what kind of road bed or building foundation they intend to build on top of this muck. I'm sure it's well engineered.
Has to be a govt. funded job ..😀
Looks like boeung kak lake in phnom penh Cambodia to me, going by the khmer in the video. They filled it with dredged sand in 2010 ish to make way for large Chinese developers.
That brings back memories, I built tailings ponds for 37 years, seen so many dozer’s stuck I can’t remember how many, we worked in sand and hot water slurry with a big spill hole as the tailings was pumped into what we called cells, things got bad when there was clay mixed in it. This rescue was nothing compared to having a dozer completely buried, and that rice patty dozer is the best for what you are doing, on the stuck dozer you should cut round holes in to the pads as that lets the tracks stay loose to turn and they also break the suction. All in god rescue besides the damage, no matter how stuck alway keep the front of the dozer up by putting the blade down.
Thanks 😊 🙏
The guy with the green t-shirt is very careful with the nature... 😂😅
Greetings from the BIG SKY. Now that really looks STUCK.
There's a right way and a wrong way, then there's this way.
Lmmfao. AMERICANS HAD TO PULL IT OUT...
What….you butt hurt that we get shit done….and without f’ing shiz up?
let's see it run after the recovery
good job guys 👍👍
A União faz a força.
Repent to Jesus Christ “I thank my God every time I remember you.”
Philippians 1:3 NIV
R
@@repentandbelieveinJesusChrist3 what a joke ?
This is what you call hydrostatic stuck ,the suction must be broken.
That squeek hurts my soul, poor poor digger
Great video 👍
It's too bad they couldn't start the stuck dozer up to help. I think that would have made all the difference.
what if they are trying to steal it?
@@frankovito , LOL!!!!!
Why wasn't it running?
Psychological Recovery? Do we have a therapist for this machine?
Mystère !!!!!
Now we see who's the expert professional bulldozer driver
Thank you 🙏 for great 👍 video 🎥 finally it is free 😀👏👏👏 can you do it again please 🙏it is only waste of money 💰 great 👍 show 😅
And turn the excavator around and use the bucket the hydros is where it's power is
😊😅 2:07 😊
That was productive day.🤣
The whole village turned out for this one.
Love this machine
Lol, which one of the three ?
If your psychological recovery has reached this level you’re too far gone.
Thanks....this just showed up in my feed...🤣🤣🤣🤣🤣🙃
As a huge fan of Chris of letsdig18, this was sadly comical….So many misses…
I have a 150 int been stuck many times hook a chain to the top of the track and pull most of time's it will rool out
Need to grease that excavator before they shear a pin.
Excelente esfuerzo ha estos operadores para sacar esta maquina saludos los felicito en equipo se puede todo 🇲🇽🇲🇽👍👍
Й1й1й
Dig a hole, fill a hole and waste a lot of time....must be a government project!
Woww kenapa boleh masuk disitu bro?🤝🤝🇲🇾🇲🇾
Good luck to the guy cleaning out the tracks , glad its not me 🤣🤣
From everything I could see, the breather intake was never underwater, so I don't believe the engine was hurt. That said, why wasn't the operator of the stuck machine inside, full throttle, helping get the dozer out?
they get pad by the hr. LOL
I thought about that too, the only thing I can think of is that they broke it bad when they were trying to get it out the first time. Maybe snapped and axle or blew the transmission? Could have wrecked the motor too it happens.
Because he was busy looking for his shoes. Who in the hell works on a heavy construction site barefooted?
@@jeffb321 People in third world dumps
If the shoe was on the other foot this might not have happened ba ha ha ha crazy ,this video is not OSHA APPROVED lol
This 1/2 inch cable is more than sufficient to pull a 30 tonne dozer, belly deep in sand.
That's "ONE BIG" "SANDBOX" !!
I was waiting for the big one to get stuck . LoL 😂
Now we got to hide three hrs of downtime for three machines 😑, good luck😁
14 men out of action for an hour.
Are they dragging it out while it is in gear ????
Big enough digger it doesn't matter. We pulled a d9 aside with a 400 series
That's what I was thinking. Doesn't really make much sense to me.
It seems....
Amateurs....
@@NickOvchinnikov !aqqa1
Thats squeakin noise sounds like the pins need greased real bad on that excavator.
Il faut s'avoir si prendre dans ces qua la bravo ! Il sent sortent !