I SOLD Over 500 Cutting Boards!
Vložit
- čas přidán 6. 09. 2022
- My Website
www.hesswoodworks.com/
Walrus Oil
For 10% Off, Use Promo Code: HESSWW
walrusoil.com/
I make these cutting boards with walnut, maple, and cherry wood. I show the process of how I made these cutting boards. How to make a cutting board. I enjoy working in my shop and making woodwork. I do custom woodworking projects. If you are interested in a custom piece of woodwork, message me on Instagram or email through my website. I send my woodwork all over the USA. Thank you for supporting small business! Thanks for watching!
#cuttingboard #woodworking
This shows the value of an efficient shop setup for a specific product, in this case cutting boards. He most likely produces three at a time since that seems to be what he's shown in the overall size of the original glue-up. Also doing long grain boards (instead of end grain) speeds up the process a lot. The juice jig and handle jig is really helpful. Nice video showing the process, I can see why he's sold so many boards.
The first sentence is very accurate..and a good reminder to myself..😅 thanks again
Love that you showed the full process of each step. A lot of videos speed through it, which is fine, but by doing so they often cut out certain pieces that should probably be addressed. Thanks
Thank you! I tried to show all the details!
So simple but so very very nice and good. Very nice cuting boards.
Thank you!
I enjoyed that video, thank you
Awesome! Thank you!
great work...love your workflow
Thanks!
One of the slickest operations I've ever seen.....great job man!!
Thank you!
@@hesswoodwork made a few end grain boards and would like to start selling them. getting my process down but it takes a while
Agree with Neil Jackson !!
Nice. Good video.
Thank you!
Love the router cord coming from above
I got a laugh from the face on the router ..nose cord ! That was some funny shit ! Atleast for me anyway..ya'll have a safe day
I stil fave the cutting board I made in 1969. That’s when schools had woodshop as a class. Two types of wood,two dowels. Cut, drill,glue,clamp,dip in wax and rub it in. The end.
My daughter made a bread box out of oak in her woodshop class in 2017. I helped her minwax it. It is absolutely beautiful. They still have wood shop and I am jealous as all hell that I didn't have the opportunity to take a woodshop class in my high school. I'm class of 1991.
very nice!...
Nicely done man. The work is great, I also love the jigs you have for the juice groove and hand grips. I'll be looking closer the build some of my own. Well done!
Thanks!
Nicely done. How would I get the juice groove jigs. I always have a hard time with those. I'm a beginner.
Kings fine woodworking has a real nice one he sells plans for i built it an it works great any size board ..
Rockler has a nice jig set up for the juice groove...I have one on order . Anxiously waiting for it's arrival !!!
Good to know ! Thanks
So cool! I am getting into the hobby and selling some and you are my main inspiration, so thanks for that!
Awesome! Thank you!
I just saw that ..I am new to this and he/you good inspiration.. glad I found you and will be watching/learning as long as you keep going ! Just subscribed !!
Wow! Nice skills. Efficient. I love the no talk. Just business!
Thank you!
You make it seem so easy, but that is the beauty of mastering a craft.
‘Mastering a craft’? He laminated strips of wood then cut them to size. Hardly difficult.
Kudos
Great vid, thanks. What oil did you use at the end?
Do you have a video on how to make the juice groove and handle jigs? That would be very helpful. Great video though. Thanks.
What table saw is this? Beautiful cutting board after people purchases them it’ll be nice if they do a couple more coats of oil or wax
My full sized router jiggled a little while cutting a juice groove, I have to plane down the board and re-cut it. I'll build a jig like this one, and hopefully, it'll go better. Thanks for the video
I am glad to help!
Looks great. I'd like to have a 30x22 lol.
Thank you! I do custom orders!
@Hess Woodwork have to take out a loan as high as wood is lol. They look good
Hi, what kind of sealant do you use? Thanks!
Do you have design specs for the jigs you used ?
For how much did you sell them and what where you material costs and the time you spent per board? I just love how your baords look.
I doubt he make much more then a couple dollars on each board.
Nobody can make living wages on cutting boards unless they are making 100 or more at a time.
It very deceptive.
If it were making him money he wouldn’t be making silly videos.
His website in the description claims these boards are $300 and sold out. So either these are very popular or no one is paying $300 and he's not making them. I'd guess the latter.
Im just beginning, but dont have a jointer or planer. Are there alternatives?
What kind of router bits are you using, if I may ask? They seem to be pretty decent.
You're an awesome robot machine. I wanna make the hell out of these things. I'm currently disabled and can't throw a hammer, frame and trim like I used to. What was the liquid? Lin seed oil? Thank you in advance for any answers. Your work's sick. You're on top of game. Great job. I appreciate you filming it.
Thank you! I used Walrus Oils cutting board oil
Great looking boards!
Looks like you have a good process worked out, but the step for cutting the hand holds/grips would be faster if you could put the board in a jig horizontally so you can cut both grooves without having to reposition the board, or at most spin it around so you aren't having to clamp, reposition, re-clamp, cut, un-clamp... it's extra movement that can be streamlined to save you time.
Just a thought...hope it helps!
Thank you for the tips!
U have got it down to a perfect science bro! Very nice! Inspired!
I appreciate that! Thank you!
Parabéns belo trabalho, qual madeira você usou neste projeto
Good work. But my question is where do you sell them, and how?
Could you please advise the different woods used :)
Very nice video I enjoyed it very much. I also make videos like yours on my channel, but i found out that it could be more effective if you are telling your community all the steps you are doing in your videos, but this should not be an criticism, just a tip for new video structures. All the best in future. I will stay watching at your channel. Thank you very much👍
Great looking cutting board !! Do you ever have an issue with the oil turning the maple darker ?
Thank you! The oil makes all the woods darker.
Really beautiful work. Is that Black Limba, Maple, Cherry, and Walnut?
Walnut, Maple, Cherry
Nice setup!
Thanks!
What finish did you apply at the end?
Love the jig you used for the handle.
Would love it if you could share some financials on this but totally understand if not.
Thank you! Maybe I will make a video in the future about that!
Yes good point
All the equipment. Machines etc cost an arm and a leg to buy
I'm about to make my first board, also side/edge grain. I'll try walnut, kwila and accent of purple heart.
What is an ideal thickness do you think?
I make them at 1.5 inches.
Well done mate. Great job. What oil are you using to oil thd board at the end please?
The link is in the description!
Bravo!
Thank you!
Why do you choose climb cuts over push cuts?
@hesswoodwork how do people using cutting boards that aren't from a solid piece of wood keep from getting glue or the sealer used to prevent glue from getting on there searing hot steaks ect ect? Thanks
The world will never know, as one has actually never sold.
Nice! Which bits did you use to make the juice groove?
I think it is called a box bit
In watching video some of use had a discussion on why do not drill and glue in 2 3/4 in. Hardwood Round Dowel in the cutting board so it could be washed in a dishwasher? Because you are build a product for people that do not normally have a good understanding of taking care of wood and keeping it sanitized and 6 out 10 Will throw in to the dishwasher. With all of your jigs, it looks like it would be a simple process for to add in, And you can have it being an up charge edition
Thank you for the suggestion.
Do you sell in Canada?
How many cutting boards do you have to make to pay for all the work shop equipment?
Awesome! What is that finish you're using? Mineral oil?
Thats walrus oil, or cutting board oil, which is a mix of mineral oil, beeswax, and maybe some other natural waxes/oils.
Walrus oil
Love it bro I’m starting my project thanks
Thank you!
There is a certain beauty in "Production" type work, especial when you have the space and jigs set up to do one product on a large scale.
In fact, that's probably the only way to make money woodworking; creating a product that people will readily purchase, and making a "run" of
a number to maximize efficiency and profits. One would hope you could use those profits to grow the business, or create more custom projects
(if that's a goal.)
Very nice! Do you mostly sell on line?
Thank you! Yes, here is my website.
hesswoodworks.com/
Nice project. Just one friendly tip. When using a router, eye protection is more useful and beneficial than ear protection, much more of a risk of a router bit failing and metal fragments shooting straight through your eyeball then hearing loss.
I should wear eye protection
I had an old dewalt trim router shoot a piece of shrapnel thru a fingertip last month.
How much does one board cost?
hey , can i use titebond 2 ?
Yes
Nice to see all the process
Yes!
How much do you charge for your cut boards
Do you have plans for the finger handles jig on the side?
I do not have plans, sorry.
That mini glue roller is hilarious. I want one
Great video thanks. I have made 2 of these for wife and friends and considering selling them. How much do you get for them? I have seen them on marketplace for 250+ on marketplace is this accurate? Thanks in advance.
Here is what I sell them for on my website.
hesswoodworks.com/
@@hesswoodwork Cheers. Around what I expected.
Flip your clamps around so you don’t get that bow and better glue up
Superbly made 😊
Thank you!
Nice boards man! Just a quick comment. In most routers, you have to push them against the wood, are you sure you are not using it in the wrong direction?
Thanks! I have had chip when I go the other way.
Great
Thanks!
If you're new to this, please do not feel like you should work this fast. Take your time and be safe!
You realize the video is sped up right? This guy isn’t zipping around all herky jerky.
@@kellerthompom8899😂
😂😂😂😂😂😂😂😂😂
🤦♀️
😂
Do you have videos or plans on your grove jigs?
No, sorry.
How long do you let the glue dry before you move on
Usually overnight, but at least 3-4 hours.
@Hess Woodwork thats the same I do my endgrains even sitting longer than that don't want to have one just fall apart my biggest fear
How long did it take you to get all those Jiggs figured out? Lol
what type of wood is recommended for this kind of work? -By the way great work.
I used Walnut, Maple, and Cherry.
@hesswoodwork how do people using cutting boards that aren't from a solid piece of wood keep from getting glue or the sealer used to prevent glue from getting on there searing hot steaks ect ect? Thanks
❤
What was that oily type liquid that was rubbed into the wood towards the end?
Cutting board oil
I find that it would be extremely time consuming making cutting boards if you don’t at least have a planner. The jointer is nice as well. But man the sanding is brutal and trying to get it flat with a sander is no easy task. That’s what expensive hand or power tools are for though
How many days for the oil to be really absorbed
I let them soak overnight, and wipe off the extra the next day.
What kind of oil do you use?
so we eat a little bit of glue every time we use the cutting board :o
What type of people did you target? I’ve had zero luck in getting my product started. Any tips?
A large majority of my sales come from my tiktok. Some of my videos got millions of views, and that lead to lots of sales.
He's lying to you. He's trying to seem successful in hopes that it launches an actually successful youtube channel. He's making no money. He's providing you no specifics. He's a loser and a fraud.
Are your boards end grain
Not this style, but I did make some end grain.
Ahhh, routing grooves into the top of a cutting board. Making the transfer of diced vegetables into the pan a pain in ass since someone first tried it.
Yes, I usually use the other side without the groove.
Where did you sell all your cutting boards ?
Most of them were on Amazon, but I don't sell them anymore on Amazon.
@@hesswoodwork Where's a link?
On his website.... for $500 for 1 cutting board. And they're "sold out". Dude is so completely full of crap. And he didn't sell them on Amazon or else he'd link Amazon. Who makes stuff to sell, has a youtube channel about making it to sell, but not readily provide a link to said amazon page anywhere so people can buy more (or in the first place)?
@@the99thtimelord16 www.amazon.com/Hess-Woodwork-Handcrafted-Reversible-Authentic/dp/B09CR8BQNR?ref_=ast_sto_dp
@@hesswoodworkSo there's 26 of them. 474 to go. Oh yeah, you said you sold 12 from your 7M view tiktok video. 462 to go.
how much do you sell them for?
$299
How much you charge for end and edge grain boards?
He charges $500 per cutting board and he's a fraud.
@@the99thtimelord16 ooof. I was thinking 100 for edge and 150 for end.
How many could you do in a day ?
It depends, about 5 or 6
You should show how you spread glue on 600 pieces, it would be more interesting.....🙈🙈🙈
Are you saying that you have now sold your 500th cutting board? Your Title to your You Tube Build is not quite clear. Nice build though and beautiful work!
I sold over 500 cutting boards. Thank you!
Yes, that’s exactly what your title says but nothing in your video mentions anything about quantities of boards sold so that’s why it doesn’t make any sense. I’m not trying to be a jerk but your title doesn’t fit your video.
@@mass112594 He's a fraud. It's pretty fucking simple.
How many cutting boards have to be sold to pay for all that pro equipment. 1000000? ;)
I bought these tools from money I made remolding houses.
I wish you answered questions
He's a fraud. Fraud's don't answer questions. They make ambiguous claims and have wives that are embarrassed by them.
Those are not cutting boards. They are serving trays. 1/4 of the work of a true end grain cutting board. 😂
Hi can u send me one pls thanks,phillippines
Sorry, I sold them all.
@@hesswoodwork ok just send me.1 next time if u have spare,thanks
edit
To much work for 2 or 3 cutting boards is good for the home but for retail they need speed up the process
You don’t say anything about your cutting boards what you use on them what kind of set up you use it’s all easy to see but it’s just not that great. Sorry.
Sorry, most of my videos are only the tool/shop sounds. Some people like it, and some don't.
Note how real workers don’t wear gloves when they don’t need to, now go look at most restoration videos….
Bullshyt
It is not a end board and not as durable
You've got it dialed in. Nice work. Saved this video. 👍
Thank you!