@@Fax_my_pants a rubber mallet can’t knock bearings in. The hammer works fine it’s just a little risky. As long as you tap it evenly around the outer part of the bearing it doesn’t damage anything.
hey so, I'm a heavy equipment mechanic and one trick to get bearings to go in is to throw 'em in the freezer for few hours. when you take them out install them promptly before they have a chance to warm back up to room temp. maybe even heat the bb a bit but NOT with a torch!
A threaded rod a couple bit washers and two nuts you could make a squeeze press to install those bearing without hammering them or harbor fight make a tool that goes over them bearing so you wont chew of the bearing hammering it in.
Bro no utilices martillo de metal para meter los rodamientos se te pueden aboyar y no te van a servir más yo recomiendo un martillo de goma aunque sea y si no tienes coloca un trapo en el rodamiento y con algo ve pegando al rodamiento para que amortigüe el golpe saludos desde León gto
So many things work better than a hammer. A c clamp with some blocks of wood would be a cheap easy option. Also use more grease. We all start some where nice bike hope you ride it hard
I just ended up with a rhd hub, and since my sprocket is guarded, and doesn’t hit the ledge, it’s fine. Also, I don’t want to pay $360 for a new hub when mine is perfectly fine.
@memba berryare you grinding on the same side as your drivetrain? If so than I recommend hub guards as you will be damaging your chain/driver. If you only intend to grind on the non drive side, there not absolutely necessary but I do still highly recommend them.
Este man es una pelota completa como se le va a ocurrir usar un martillo metálico para los rodamientos del centro Aparte de eso es una bicicleta muy hermosa
whats going on with the cinema hub guard i have the same one came with my freecoaster pretty sure it goes under the frame unless ur doing some whack spacer shit edit: lol just scrolled down
Nice!!
Thanks! I love the frame, it’s the only bike with the perfect geometry for me.
@@lukasstipp_bmx cool! It looks good and your video is great!! :)
Can i have 1
@@ahrondelacruz1108 nice try
@@lukaoss hehehe
I almost had an anxiety attack watching him batter those poor bb bearings 😂😂😂😳
Lol yeah I really need one of those park tool things
@@lukasstipp_bmx at least use a rubber mallet buddyy
@@Fax_my_pants a rubber mallet can’t knock bearings in. The hammer works fine it’s just a little risky. As long as you tap it evenly around the outer part of the bearing it doesn’t damage anything.
@@lukasstipp_bmx ahahaha Yh you really do bro! 😂😂
@@lukasstipp_bmx place a peice of wood over the bearing to even out the force of the mallet, it drives the bearing in more evenly as well
Awesome video!! Love the camera angles
hey so, I'm a heavy equipment mechanic and one trick to get bearings to go in is to throw 'em in the freezer for few hours. when you take them out install them promptly before they have a chance to warm back up to room temp. maybe even heat the bb a bit but NOT with a torch!
Thanks that’s a great idea!
Love this man big fan of you and BSD love your vids and bike looks fire
Thanks!
Sickkk! So glad I checked your channel out
I'm big jealous. This looks niceeee 🔥🔥
Not for long 😉
Daddy
I also
Inglish
Oi mim di Vouga ai
A threaded rod a couple bit washers and two nuts you could make a squeeze press to install those bearing without hammering them or harbor fight make a tool that goes over them bearing so you wont chew of the bearing hammering it in.
that looks sooo good bro
Wow this looks like a sick bike
thank you for this tutorial… finally i can install my bb bearings😛🙏 and i can build my dream bike
That looks clean
Seriously,I'm fall in love with this bike.ahhh so jealous.
*_the video is perfectly shot! I would like to have a BMX like this_*
Yes
@@rajkumarbirajdar3565 no
Sweet ride! 🔥😎
That quality is crisp af
LOVE YOUR VIDEOS
Gorgeous!!!!
Very nice.
I love this bike
The protector you put in the peg and the painting goes inside hahaha
4:36 my head kinda hurts when you put the rear hubguard outside😆
i'm not only the one who've been chocked !!
its called dropout guard 😆
I love this bike...
Bro that is 🔥 i hope i could build mine soon
From PH
Wow! Really nice!
Baka naman po..subrang ganda sarap sa pakiramdam magkaron ng ganyan
Nice colour 👍🏽
Nice bike!
Ho------LEE------SHIT! This is the single best piece of video ever recorded...EVER! AND...the best bike of all time in the universe.
Thanks lol
nice build, definitely upgrade those cranks as soon as possible, they’re cheap and when they break the medical bill will be a lot more than a new set
Bmx cranks don't break easily, you gotta put a lot of force, weight and pressure to break them, even if you have a 5$ set
@@Croccolucho your clearly a beginner
@@Croccolucho bro my friend just broke the same cranks and they were a month old...
@@413_k7 been riding for 6 years never snapped a pair of cranks except 1 piece cranks on my 1st ever bike
Samox cranks are bad? Please tell me
Buen trabajo broo sigue asi
Very nice.
I love it.
Irado demais. Top!!!!
Muita foda essa bike 😍
At 4:34 I didn't know that you have to fix the chain protector out side the frame! I thought it should be inside close to the wheel sprocket!
How i wish that someday i have bike like this🤔
Thats is really cool
i can't believe you rode bmx when you put the hubguard like that 😂😂😂😂
When you build a bike always clamp it by a seatpost .A cheap seatpost works great as a dummy post for builds .
Bro no utilices martillo de metal para meter los rodamientos se te pueden aboyar y no te van a servir más yo recomiendo un martillo de goma aunque sea y si no tienes coloca un trapo en el rodamiento y con algo ve pegando al rodamiento para que amortigüe el golpe saludos desde León gto
So many things work better than a hammer. A c clamp with some blocks of wood would be a cheap easy option. Also use more grease. We all start some where nice bike hope you ride it hard
Love the video just 1 question why would you make your bike right hand drive if you grinding on your right
I just ended up with a rhd hub, and since my sprocket is guarded, and doesn’t hit the ledge, it’s fine. Also, I don’t want to pay $360 for a new hub when mine is perfectly fine.
@@lukasstipp_bmx make sense
@memba berryare you grinding on the same side as your drivetrain? If so than I recommend hub guards as you will be damaging your chain/driver. If you only intend to grind on the non drive side, there not absolutely necessary but I do still highly recommend them.
wow nice man
Luar biasaaahhh, kapan punya yaaa
Love the bike looks... anyway,what song is this?
I got my own custom alvx build today
It’s so much better than my kush 1
Sick! 🔥
Dream ... Love from india
Go for it....slllammmm them bearings
((💀 Complimenti x il mostriciattolo👍))
What site should i buy my bike from ??
so inspirational
Always wanted a bmx .
Why s driveside guard outside of the dropout
Wow cool👍👍👍
Woher haben sie die Schutzteile die sie unter die Pegs getan haben? ich brauche nämlich welche
te quedo fachera
Meu sonho é ter uma bmx!
Este man es una pelota completa como se le va a ocurrir usar un martillo metálico para los rodamientos del centro
Aparte de eso es una bicicleta muy hermosa
Pensé lo mismo, y luego el hubguard. Facepalm. Aun asi el frame es hermoso.
Pone las. Guardas por fuera qué rayos quien las pone por fuera
respect man good build and filming:)
Cio gkelglrltlt
😎
Cool
What is the top tube and wheel size?
what bottom bracket did you use?
What street bmx offset fork you use?
Oooo that’s noice
whats going on with the cinema hub guard i have the same one came with my freecoaster pretty sure it goes under the frame unless ur doing some whack spacer shit
edit:
lol just scrolled down
I like the video
4:38 what's that called? i saw it multiples times but i don't know the name, i thing it's kinda important
I would hit the bottom bracket with a rubber mallet?
Wrong install of rear hub Guard outside of Cog drive
Fixed
Yeah2 hahaha
may he thinks that hub guard is a Gsports style 😏
COG DRIVE 😂 ITS CALLED A SPROCKET
Cuanto cuesta
what the name of the frame
What a color
Wow so nice🥰🥰
What a bike
what the type of the headset
I also have the same but it need to be replaced asap
#help
Where can I buy this whole set?
el hub guard tracero no va por dentro de la vaina??
yes
SWEET!!.!!!!!!!!
Holy headset spacers are those poverty cranks from 1996?
🤩
Nice video but why did you install the hub guard out the drive side?
Buenísimo.
Wish I had the money to do a dream build
hey what music did you use?
Sweet I can't wait to ride and buy that after you beat the shit out of the bottom bracket.. take my money now
the background song is from tones and i ya foking cool
Freshhhhh💦🥴
Fua amigo alta bici
Saw the bottom bracket bearing install & I was outtt
Só vaaaaapooo 🙅🙅🙅🙅
How much does one of these bikes cost?
1:44 should you use a rubberhammer instead of a regular one so you dont damage anything
Agreed i was cringing looking at that 😭😭
He used a full on claw hammer 😂
😍😍😍😍😍😍😍😍😍😍😍
cool
why 3pc cranks & not 2?
Is a bmx good the fashion
Bro price for cycle
Where can I
Get one to buy
What is the name of this cycle sir
I hope I have a bike too🥺😔
how much does a BMX bike cost?
Link to purchase parts please