Yep the excavator got too far out and should have been benched down a bit. And if you run a tapered box , a little narrower in the back helps. But this can cause trouble keeping the box on line. But it will pull easy.
That operater picking up from the bank is an idiot, you point your tracks at your load, if you try to pick something up at that angle youre more prone to your track coming off the groundddd
The guy on top should flatten the dirt and go across to the other side to where his machine is right beside the front of box and hook his chain up to help pick that part up. Then, the other guy use his bucket to pick up from inside it and track backwards as the dozer pushes. Simple. Its just physics.
@@brianwalker1386 yes you can. I do it all the time. Only times I've used a trench box are in areas with a high water table to where are dewatering struggles to keep up. Other than that if you know what you're doing you can bench tight trenches safely
How deep do you think they are Benny? If you bench that trench, you'd be removed the curving gutter, it'd be in the people's property. Add shield is the way to go.
It’s in upside down. The cutter on the box should be in the not above which makes it easier to pull and yes he definitely over dug in length but probably still can reach over and grab the bars with his teeth
No it’s not! There pulling double boxes! It’s the only way you can connect them! Should be using a bigger machine! If it’s wedged from material falling down beside it dig it out! If that don’t work take the top box off and lighten the load!
Just looks like a bunch of people that don’t know how to do the job. Sorry not sorry. Like really after doing this for 15 years I’d quit working for that company. No one on this video had a clue
That’s not tuff. I don’t see anything popping. Heck we’d be jerking the chain so hard it be snapping my boss would of been screaming to get some dirt in that bucket to give that thing some for force
What a dangerous waste of time didnt anyone think to get both excavators on one side? hook up to each corner pull up together then crawl around to the other side and do the same ? And what is with the pile of spoils ? Why dont you clean up get shit out of the way and do things properly what a disaster....
nobody thought to move all that fkkn dirt out of the way get BOTH excavators on the same side level up and pull together go around the othe side and do the same what a mess
The fkn box is upside down,what in the wide wide world of sports are you guys doing?if that komatsu goes in the hole go ahead and turn your keys in!😂 Just some construction humor boys,carry on🤘
the experts here talking about the box is upside down, thats how boxes are stacked.
the top section is a bottom upside down. It keeps the spreaders low and allows the operators to dig inside the cage.
That 490 is having trouble getting it out, it is really stuck.
Should be called "how not to pull trench shields"
ready for gold rush i see
LMAO
Amazing how fast sewer work can max out a 490.
Tom P. 490s are gutless a 400 will pull that
Yep the excavator got too far out and should have been benched down a bit. And if you run a tapered box , a little narrower in the back helps. But this can cause trouble keeping the box on line. But it will pull easy.
Gonna keep my mouth shut here.....everyone makes mistakes.
Need a cat 365 / 375 pull that Shield like it was nothing
Reminds me of the Grateful Dead everybody's doing their own thing they're in the same spot but nobody's really working together.
😂😂😂
Awesomely true. The team work is in spirit
Trench box did its purpose saved life’s
That operater picking up from the bank is an idiot, you point your tracks at your load, if you try to pick something up at that angle youre more prone to your track coming off the groundddd
Great 👍👍👍👍🎉🎉🎉🎉😊😊😊
The guy on top should flatten the dirt and go across to the other side to where his machine is right beside the front of box and hook his chain up to help pick that part up. Then, the other guy use his bucket to pick up from inside it and track backwards as the dozer pushes. Simple. Its just physics.
Glad you Guys,are showing your Work 💖💙🤓😍😃 MUCH LOVE !!
It is to Shields
The first mistake he made is he over dug himself he dug in front of the Box you should use a curl move and only short Strokes
His biggest mistake was using a trench box. If he knew how to bench properly there is no need for a trench box
@@Bennysol Can't open up a trench in the street like that. All the other utilities water Sure gas
@@brianwalker1386 yes you can. I do it all the time. Only times I've used a trench box are in areas with a high water table to where are dewatering struggles to keep up. Other than that if you know what you're doing you can bench tight trenches safely
How deep do you think they are Benny?
If you bench that trench, you'd be removed the curving gutter, it'd be in the people's property.
Add shield is the way to go.
It’s in upside down. The cutter on the box should be in the not above which makes it easier to pull and yes he definitely over dug in length but probably still can reach over and grab the bars with his teeth
No it’s not! There pulling double boxes! It’s the only way you can connect them! Should be using a bigger machine! If it’s wedged from material falling down beside it dig it out! If that don’t work take the top box off and lighten the load!
It's stacked you are suppose to flip it so the knife ended is pointing up. Then you lock it into place by placing 4 pins in it.
I didn’t realize they were stacking boxes but stacked plenty of boxes. Never had to flip the top box. The top box was flat on both top and bottom.
Honestly that box looks upside down
It's 1 box on top of another
@@philliphoffman5260 yeah I seen wondering if they re locked in.
Stackers
I wouldn’t share this video as nobody’s knows what they doing
Know that drill all to well 349 heeled up d4 pushing good times 290 backfilling 20 foot cuts
Been there.
Just looks like a bunch of people that don’t know how to do the job. Sorry not sorry. Like really after doing this for 15 years I’d quit working for that company. No one on this video had a clue
Hold on a sec hold my beer let me show you how it’s done
Definitely upside down n that dozer shouldn't be pushing against those exposed pipes😢
So many things wrong with this setup.
Get rid of that cable and grab that crossbar
Obviously pounded the box down, learn how to dig
Time for bigger equipment lol
Need a big cat 😁
Big 375
Chào bạn nguy hiểm quá❤
S.O.B
is this a joke ? put your buck inside and pick up from the spreader bar and track back
These are double stacked. You are seeing the top box only. This was actually a pretty solid crew. It was just that stuck.
@@PhilipWacholz drug testing needed
Phillip go back to video games stackers arent that big and he aint excavate to stack a double stacker buddy
That’s not tuff. I don’t see anything popping. Heck we’d be jerking the chain so hard it be snapping my boss would of been screaming to get some dirt in that bucket to give that thing some for force
Need a bigger digger like a R9800, then they might manage!
no..a better op and setup...plan
A crew of clowns
That’s crazy
Jesus.
Komatsu driver stand on v positions you can lift more
The trench box is upside down. Duh!
What a dangerous waste of time didnt anyone think to get both excavators on one side? hook up to each corner pull up together then crawl around to the other side and do the same ? And what is with the pile of spoils ? Why dont you clean up get shit out of the way and do things properly what a disaster....
Upside down. Bench down the komatsu level before he puts it in the hole. The case? Is too far away to do anything. Holy fuck what are you guys doing?
nobody thought to move all that fkkn dirt out of the way get BOTH excavators on the same side level up and pull together go around the othe side and do the same what a mess
Hahahahahahah thanks guys! I needed the laugh!
I dont understand why the box is up side down?
Porsche 911 no kidding
These are double stacked. You are seeing the top box only. This was actually a pretty solid crew. It was just that stuck.
Chào bạn ❤❤
These operators????? Shouldn't be. Level off the komatsu and pull your trench box. We pull same size box with a 360 easily.
And thats exactly why we don't use them! Risk vs. Reward.
Yeah.
Why upside down?
These are double stacked. You are seeing the top box only. This was actually a pretty solid crew. It was just that stuck.
The fkn box is upside down,what in the wide wide world of sports are you guys doing?if that komatsu goes in the hole go ahead and turn your keys in!😂 Just some construction humor boys,carry on🤘
hey dumbass that’s how it is suppose to go
Fellers, yo box in up side down. You can't push the box until you dig infront of it. Bunch of backyard landscapers.
All the gear and no idea !
Someone put the box in upside down lol
Liebherr take it alone...😏
What kind of shit show am I watching
Ameuters and dangerous.
Box is upside down 🙄
No, it's a double stacked box
wailnshred Oh gotcha man. Did not even think of that lol. I don’t dig much pipe lol. Mainly dozer n layout lol
It will be tough cause it's wrong way round
That's how those particular boxes fit together.