Yes for the stock gears I believe it has 15t 19 clutch bell , low gear ,I'm going to put Gimar .28 in with bigger gears then it will get it, thanks for watching!!! 😀
Your low is pretty rich you can hear it. I know what your gunna say "it going to hit 300*" and I would say yup perfectly normal. Be aggressive on the low and conservative on the high at low rpm it doesn't need the lube like it does at 30k + I keep trying to spread the word. And think of it this way plastic don't melt til 400*+ so I metal/aluminum engine running at 300* is perfectly fine. Better engines and better carbs do run cooler but these engines run best around 300. And I do mean 300 at the end of tank obviously not the beginning that's too lean
Great run!!! 46mph is good in my book!!! Car looking and sounding great to!!!🫡
Yes for the stock gears I believe it has 15t 19 clutch bell , low gear ,I'm going to put Gimar .28 in with bigger gears then it will get it, thanks for watching!!! 😀
Ripping!!!!
Running really nice bro 🤜🔥💯🇦🇺👍
Thanks 👍
Nice 👍
Thanks ✌
46mph
Your low is pretty rich you can hear it. I know what your gunna say "it going to hit 300*" and I would say yup perfectly normal. Be aggressive on the low and conservative on the high at low rpm it doesn't need the lube like it does at 30k + I keep trying to spread the word. And think of it this way plastic don't melt til 400*+ so I metal/aluminum engine running at 300* is perfectly fine. Better engines and better carbs do run cooler but these engines run best around 300. And I do mean 300 at the end of tank obviously not the beginning that's too lean
It's a balance. I'm just trying to help not hurt you or your cars!
Ok thanks, that's pretty good 46 for stock gears
Im estimating about 50 mph❤ ,
It will hit 50 when I change header and do some port matching and few other mods
Very short!
Sorry, but I was only testing and learning The performance analysis device and sharing it with you, so it didn't take long
@@RuggedRc oh haha, not the video, the car!