How to change the coating on your FELCO pruning shear

What you'll need:
- A new spare handle grip
- Proctective gloves
- A cutter
- Sandpaper
- Some hot water (100°/212 °F)
- Quick drying glue for metals
- A flathead screwdriver
Instructions:
1. Wear protective gloves
2. Remove the old red coating with the help of a cutter
3. If any residue remains, remove it with the sandpaper
4. To increase the grip of the surface use a file
5. Prepare some hot water and put the handle grip inside
Meanwhile:
6. Apply some metal glue on the handle
7. Remove the handle grip from the hot water with the help of a screwdriver to avoid any burns
8. Remove any excess water from the handle grip
9. Firmly insert the handle grip onto the handle
Some tips:
-Be careful not to allow too much time between applying the glue and inserting the handle grip onto the handle as you are using quick drying glue
-Please refer to the spare parts diagram on our website to find out the right one for your FELCO pruning shear
-Do not leave the handle grip in the water for more than one minute as it may expand too much