FINALLY!! THE S10 MAKES IT TO THE TRACK!!
Vložit
- čas přidán 23. 05. 2022
- Well, we finally made to Medford dragstrip with the S10 to make some passes... Been a long off season! The truck ran great and we look forward to a awesome 2022 racing season!
Don't forget to LIKE, COMMENT and SUBSCRIBE - Auta a dopravní prostředky
Cool truck
That was vary nice
Nice S-10. Nice and clean, no ghetto wheels. I have a 383/4 speed street/strip S-10. I'm in Phoenix, AZ. We just lost the only drag strip anywhere near our area, closest one is now over 100 miles away and not nearly as nice.
That sucks about your track! We need more racers!
As far as fuel economy goes, very high Smiles per gallon. Great stuff.
Keep on keeping on, keep doing what you're doing. Great to watch!!!
Thank you! 😃
That little S-10 sounds really rowdy. I like it. Bean has done some growing since we seen him on the channel.
He's grown so fast! dang kid is eye to eye with me now!
Nice Work. That little S10 sounds healthy, and seems to be very consistent. 🍻
Looking good 👏🏻👏🏻👏🏻
Thanks!
Still launches great Scott!
Thanks!
Your truck sounds and runs great. Congrats to you and your son.
Thank you!
@@ordinaryguygarage3667 I have a 427 sbc I had built in 2012. It has the afr 220 heads on it. It has all the good stuff in it. It makes 656 hp @6200 and makes 598 lbs of torque. It has a hyd roller in it.
Great clips Scott, I’m happy your s10 ran good and you had a great time
Thanks! we had a really good time.... now we get to start figuring everything out
S10 hits pretty hard I love your truck can't wait to see it sometime
Its a fun ride for sure!
I am just north of Roseburg come up to Coos Bay let's run the eight-mile together I'd like to meet you
@@curtisdanielsforservice4131 we’re planning on going to coos bay June 3,4 and 5th
I saw my car in the background! I'm famous
Don’t let it change you….
Hey Scott the s10 looks good my dude and it was great talking to ya at the track. I need to get your number so I can get some ideas on my s10 build. 😁
We’ll be down at the track this weekend…. Come see me
Show some time slips so we know what is going on. 😢
Did you have a trans brake on the truck here?
Yep
you should take your tailgate off
What does the truck weigh?
I will be at coos bay on 3rd hope to see you then
I am bringing my s10
Looking good buddy. You have done a great job on your build. I watched the video several times, the only thing I will say old guy to younger guy would be turn the pre-stage on and take tiny bumps into the stage bulb. You would be surprised how much difference a couple inches in the stage beams means. I hope you don't take offence with me trying to help.
I've always tried to creep in just enough to light the second bulb so that way I know exactly where I am... I'm gonna try bumping in like you're saying... I've seen guys do that before
@@ordinaryguygarage3667 That and my front tire pressures are the same ever pass. Good luck my friend.
Love this truck and the build sounds awesome as well what size and brand exhaust?
1 3/4” fender well headers, 3” pipe and summit brand flow master knock offs
@@ordinaryguygarage3667 nice bro love it
Lil bit of spray it'll be a 9 second truck.
Are you still using the cast steel crankshaft with 13.2comp if that’s awesome 👍👍👍
How many cubic inches is the motor?
385 ci
The rear looks like it's instant spin at the hit. At times loading and unloading. Was that a bad track prep day? Suspension improvements planned?
Yeah, I have some suspension upgrading and tuning to do...I just stuck all the parts on and it worked well like that with less horsepower
@@ordinaryguygarage3667 Definitely seems to run good even with the spin.
Post your time slips. Nice clean truck.
Thank you! My best best et was 10.64 and my best mph was 127. Hopefully next time out I'll have time slips I can show. For some reason the track has a hard time replacing ink in the printer which makes the time slips really hard to see on camera
@@ordinaryguygarage3667 Was hoping to see your 60 ft times to get an idea how your home made caltracs were working.
@@Tims13ful my best 60' was 1.55.. my main focus was to dial in the motor. I hadn't done any adjustments to the rear suspension yet.
What does the truck run in the 1/8 of a mile and what gear are you running
Did you have to use any offset rockers for the afr220 or just standard 1.6 rockers
Im running standard 1.6 rockers....
I have an 84 S10 long bed wanted ask u quiestion putting in a 434 stroker 14:9:1 compresson with a PG 180 SCG S10 is 3150 lbs what gears would u use ? its a 12 bolt bty u truck looks great runs good too
Sooo are you racing on the 16th?? Have you got a good timed pass with the new motor??Will it run 10.60s??
Yes sir, we are racing on the 16th! I’ve only been to the track the one time this year and it ran 10.60s… got something up my sleeve for Saturday! 😈
Okey… 16th isn’t happening for us.. my house shows up next week and I gotta spend the weekend preparing for it.. be at the track soon
where is et? would be nice to see each run but seems et is cut off right when it should be there to see
What can you do to stop the wheel spin skip hop chirp deal going on at the hit?
The track prep was a bit lacking Saturday…. I probably could have dropped the launch rpm a bit
More air in the tires usually will fix that.
The track looked like a no or light prep I don't know what your ET goal is? But to me it looked like the poor track prep making your truck unable transfer at the hit. lower first gear and 4800+ launch can be hard to be consistent. Good luck with your weight transfer adjustments.
The track didn’t have a very good prep from what guys were saying… my main focus of the weekend was to get some passes in and try to get used to the new set up.. I have a lot of suspension work to do as well as staging/ launch technique… I’d like to see 10.50 or better at this track 1400’ elevation
@@ordinaryguygarage3667 I really like the way you don't hold the trans break against the engine for very long. If you could try to always stage last and you know the starter at the track you could nail it right after staging giving you more time to watch the lights. It's not easy or we all would get a good light LOL. I know you will get 10.50 more though I hope you get 150 to 200 passes from your engine be for a rebuild.
@@garyrisley3781 That's for sure! Id like to see this motor last for a few seasons
Are u running on 220 afr head are the same one on the video.
Yes… AFR 220
What gears are u running in the rearend what rearend did u go with?
It’s a 8.8 with a 4.10 gear, 35 spline axles and a spool
What ETs is it running now?
It ran a best et of 10.61 and a best mph of 127
What does it run a a 1/8th?
6.73
I just subscribed is this track a 1/8 or 1/4
Medford Dragstrip is 1/4 mile.. Thanks for subscribing!
Is that a 2 or 3 speed auto
It’s a 2 speed powerglide