Video není dostupné.
Omlouváme se.

Smart Fortwo Alternator Replacement (without lowering engine)

Sdílet
Vložit
  • čas přidán 9. 12. 2023
  • How to replace the alternator on a smart fortwo 450 this car is a 0.7 coupe, if you are attempting this job this way it is certainly a good idea to be a competent mechanic, this isn't a super hard job but is very tight space, it's easy to damage things so take your time and stay calm, this job will test your patience but it is possible. This job took me 3.5 hours in total
    Thanks for watching please like and subscribe
    #smart

Komentáře • 14

  • @Dg-zj6jo
    @Dg-zj6jo Před 14 dny +1

    wow well done what a job

  • @sumy5385
    @sumy5385 Před 4 měsíci +1

    Thanks for the video, I managed to get it done with some help from my 27 year old daughter and her small hands 😅

    • @M-oneeleven-M111
      @M-oneeleven-M111  Před 4 měsíci

      It's definitely not a job for big hands , well done it is a challenge definitely thank you for watching 🙏

  • @constantinruja8617
    @constantinruja8617 Před 6 měsíci

    Du hast mein Leben gerettet, mein Freund Vielen Dank

  • @kiltedgod
    @kiltedgod Před měsícem

    Note the Torx head on the alternator tensioner adjutment should NOT be turned, it;s just a stud. Only undo the 15mm Nut so its loose. The Bracket does come out with it AFAIK.

  • @PyroRob69
    @PyroRob69 Před 8 měsíci +1

    Do you need a jack to put it on the ramps or do you just lift it up by the bumper?

    • @M-oneeleven-M111
      @M-oneeleven-M111  Před 7 měsíci

      I just reversed it up on to the ramps, it can be a little tricky as you have to keep the power on as you reverse up them, and be very quick on the brakes at the top. If your car does not run I would recommend using axle stands rather than ramps, but this would allow you to remove the rear wheel on the crank pulley side and remove the wheel arch liner, this makes access to the annoying nut for the upper alternator bolt a lot easier. I also recommend changing the water pump whilst doing this job, my water pump gave out 3 days later be careful with belt tension too there is a harmonic tool you are supposed to use but you can use the twist method to determine tension.

  • @c-31100
    @c-31100 Před 8 měsíci +1

    Nice Job you been done no more slk ??

    • @M-oneeleven-M111
      @M-oneeleven-M111  Před 8 měsíci

      Unfortunately no, that car had a few issues that put a stop to continuing with that particular car, however I still have the M111 stroker build, I've just been held up on that due to money and parts availability but hope to get back on track with that soon.

    • @c-31100
      @c-31100 Před 8 měsíci

      @@M-oneeleven-M111 okej i have one slk 230 -98 aut so if i needs parts do think you can help me ? Here in Sweden its hard to find i m not good with English so.i hope you understand what i means 👍 Thomas

  • @1648-
    @1648- Před 5 měsíci +1

    Is this een alternator with starter in 1

    • @M-oneeleven-M111
      @M-oneeleven-M111  Před 5 měsíci

      Not on this model the starter is on the gearbox side and alternator on the auxiliary belt side, unfortunately if the starter fails on a W450 (this shape) it's a fairly involved job to change it

  • @chrishull9983
    @chrishull9983 Před 7 měsíci +2

    Well done - an awkward job.

    • @M-oneeleven-M111
      @M-oneeleven-M111  Před 6 měsíci

      Thank you... Absolutely, but I for sure recommend replacing the waterpump too when doing this that jobs even more awkward.