Video není dostupné.
Omlouváme se.

Adjusting Pocket door rollers [pocket door 101] amazon link

Sdílet
Vložit
  • čas přidán 1. 12. 2020
  • Fix your new or existing pocket door rollers by adjusting the pocket door rollers themselves. Sometimes the door is dragging on the floor or maybe its not closing properly up against the door jamb, this is likely a roller issue. If you like the content and the channel, please subscribe! :)
    My Name is Matt, and I am a full time carpenter from canada eh! My goal with this channel is to share, money saving tips & tricks for everyday homeowners. Owning a home can be costly (especially if you buy an older one... lots of character they said!). I upload content weekly to save you money! Your welcome :) -please subscribe-
    Disclaimer:
    Videos produced by DIY for the average guy are provided for informational & entertainment purposes only. Everything within this video & website is for informational, educational, & entertainment purposes only. DIY for the average guy will not be responsible for any injuries or does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and DIY for the average guy cannot be held liable if they cause any damage to their homes or property. With different rules and regulations around the world and constantly changing standards, building codes, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. DIY for the average guy cannot claim liability with all applicable laws, rules, codes and regulations for a project.
    Please leave your comments & feed back below & don't forget to smash the thumbs up for the CZcams algorithm. Don't forget to SUBSCRIBE!!! :) THANKS!
    SUBSCRIBE! :)* / @diyfortheaverageguy
    -music-
    Follow Vexento on Twitter and SoundCloud if you want to! ^_^ All of Vexento's music is amazing!
    ● / vexento
    ● / tracks
    AMAZON USA
    pocket door wrench (fits most hardware!!)
    www.amazon.com...
    - AMAZON CANADA-
    Pocket door wrench (fits most hardware)
    www.amazon.ca/...

Komentáře • 27

  • @gasser1221
    @gasser1221 Před 9 měsíci +2

    Great job explaining these issues! Thank you.

  • @Riogrande1964
    @Riogrande1964 Před rokem +7

    Possible to perform this adjustment after molding applied around door?

  • @billyrichardson1215
    @billyrichardson1215 Před 2 lety +17

    Not an Allen key, that’s an offset open end wrench.

  • @debbiecahill8892
    @debbiecahill8892 Před 2 lety +2

    Thanks for the info. It made the fix so easy.

  • @user-nk5el6py3u
    @user-nk5el6py3u Před 2 měsíci

    Hello, I need to adjust my pocket door rollers, so what exactly call the small ranch?

  • @SidharthaPalani
    @SidharthaPalani Před 8 měsíci

    Q: Turning which way will raise the door?
    Context: I tried this great idea but when turning the screw to the right (to pull up door) the nut just went up midway up the screw without bringing the door with it. I’m not sure if turning left to loosen will pull up the door.
    Thanks for this video!

  • @johnnyclavijo7515
    @johnnyclavijo7515 Před 2 lety +9

    You may want to consider redoing this video in landscape and mount the camera for less movement.

    • @DIYfortheaverageguy
      @DIYfortheaverageguy  Před 2 lety

      Thanks for the comment! Will do, stay tuned! :)

    • @EagleTears
      @EagleTears Před rokem

      Don’t worry about fixing the video, it’s trash anyway.

  • @ashley4418
    @ashley4418 Před rokem +1

    Mine has these little dial looking things and i cant figure it out

  • @Nadahope3626
    @Nadahope3626 Před rokem

    Hi, my bathroom pocket door rubs against the pocket for the door. I had someone replace the door and slide because the other was damaged. How do I keep this from rubbing against the door because it’s damaging the door.
    Thx

    • @DIYfortheaverageguy
      @DIYfortheaverageguy  Před rokem

      Pocket doors are tricky.
      1. The door frames should be 100% level and plumb.
      2. The rail should be true and plumb
      3. There has to be an adequate gap between the door slab & the split door jamb (1/4”-3/8” to either side)
      4. Use the guides on the bottom of the split door jamb for micro adjustments
      Hope this helps!

  • @MikeStro-us3bj
    @MikeStro-us3bj Před 3 měsíci

    Can’t find open ended offset wrench anywhere.

  • @Cbegnaud
    @Cbegnaud Před 2 lety

    Thanks I'm having to adjust mine

  • @stevenzacharakis
    @stevenzacharakis Před 3 měsíci

    I need to keep re adjusting mine every month. I cant seem to lock it permanently to not sag again. Are these brain damaged technology or is it just me?

  • @jeffcourville2167
    @jeffcourville2167 Před rokem

    My favorite part is when you adjust the door

  • @lostintime8651
    @lostintime8651 Před 3 lety

    Nope my door is not like that moving on

  • @mneal7799
    @mneal7799 Před 3 lety +1

    Second!

  • @jeffcourville2167
    @jeffcourville2167 Před 3 lety +1

    First

  • @mattk868
    @mattk868 Před 3 lety

    First!