Vacuum Circuit Breaker Nameplate Details | Explained

[@sisir22]

very nice explanations sir

[@GauravJ]

Thanks and welcome

[@ratnesh12100]

Please make video on automatic fault locator AFL .. By the way nice videos..

[@prabhakaranr3594]

Nice explanation

[@surendrakverma555]

Excellent. Thanks

[@akashpatil9341]

Nice video thanks you so much for knowledge sharing 🙏

[@devendraparihar1253]

Good explanation sir , thanks

[@niluv3982]

nice

[@VigneshVicky-hm7kc]

Useful information! Kindly elaborate about DC component. I'm not clear about it,how it occurs & when? Pls guide us

[@shemphangnongsiej2168]

nice video sir, thank you very much my doubt on the duty cycle is cleared. sir, can you please define or give some reference or share some light on how to arrive the ALTITUDE CORRECTION FACTOR of the BIL of equipment above 1000m level?

[@Eng853]

Hi sir, Please make a video of ferro resonance and their effects in instrument transformer

[@EnthusiasticRedCar-xy4yg]

Sir, want to know about why Nitrogen gas usage in PCVCB Bussings.tnxx🙏Jai hind🇮🇳

[@electricalhacks1795]

I request you please make a video on "power system stability enhancement by simultaneous AC-DC power transmission"

[@Sanju-hr3cr]

Pls make videos on VCB DRAWINGS.
CIRCUIT BREAKER CONTROL WIRING WORK.

[@donberg01]

What about load break switches? There are occasions when you have to open a circuit under load, please explain?

[@jaherayo6978]

sir how we know the rated volted / current from normal volt/ current ,plz explain.
Sir plz make a video on interlocking between isolator and vcb

[@raj....8240]

Relay trip coil operation on
Ac or dc
Ya both reply sir🤩🤩🤩😍😍🛑🛑

[@realislamicguidance2375]

CB having Higher DC component is better or CB having lower DC component is better?

[@balachandra7475]

Please make a video safe plus type rmu &vcb

[@devendraparihar1253]

Make video for LA , wave trap also

[@rahulmudavath5923]

Sir, why CB rating is less than transformer full load current.

[@magnamind]

Had some clarification on IEC62271-100

[@sudheersubairkutty1633]

Please note that for breaker operating sequence is mentioned in IEC-62271-100, not in IEC-62271-1 which you mentioned.

[@GauravJ]

Operating sequence is also part of IEC 62271-1

[@dkverma67]

What's Ferro Resonance?
Please explain

[@narenderreddy7305]

Ok

[@chinnakarlapraveen9966]

Why in transmission substations 400kV is not directly stepped down to 33kV & why they do it in 3 steps as 400/132kV then 132/66kV and then 66/33kV?

[@chinnakarlapraveen9966]

Hi sir

[@GauravJ]

Hi Praveen

[@chinnakarlapraveen9966]

Sir make a video on why 50Hz is used in India, where as 60Hz in usa

[@ratnesh12100]

At 6.47 min,
Generally it is either 110vDC Or 220 vAC instead of 110 kv and 220kv

[@GauravJ]

Oh sorry.. did i say kV.. it’s volt actually

[@magnamind]

Hi

[@RB-xv4si]

I think you are confused. In a three phase system, two poles is single phase, not two phase.