4806 | CV Bootgun | Laser Tools

Sdílet
Vložit
  • čas přidán 8. 09. 2024
  • The quickest and most effective way to install flexible CV boots with diameters up to 115mm. Designed and made in the UK, the bootgun uses a compressed air supply to stretch the CV boot onto the drive shaft with the minimum of effort. The bootgun is simple to use, just connect the airline, slide the boot onto the tool, expand the arms, push the boot into place and remove the tool. Can be used for both outer and inner boots without dismantling the joint, saving time and money. Ideal for the professional workshop for fast, clean boot installation
    Available to order now from your local Laser Tools dealer. (Part No. 4806)
    toolc.uk/4806
    Also featured:
    CV Boot Hose Clamp Cutter (Part No. 7092).
    toolc.uk/7092
    CV Boot Clamp Pliers (Part No. 4136).
    toolc.uk/4136
    Connect CV Boot Kit 18-26mm (Part No. 37660).
    toolc.uk/37660
    Connect CV Boot Kit 27-37mm (Part No. 37661).
    toolc.uk/37661
    #LaserTools #tools #CVBoot #HowTo #tools #AutomotiveRepair #AutoRepair
    ➤ Subscribe: / thetoolconnection
    ➤ Like: / laser.tools
    ➤ Follow: / laser_tools

Komentáře • 11

  • @ozmacguyver
    @ozmacguyver Před rokem +4

    Nice!
    Simple video, but fully indicates the job at hand and how to complete it.

  • @BruteWillis
    @BruteWillis Před 2 lety +7

    WARNING be aware that this REQUIRE a FLEXIBLE rubber boot. A normal rubber boot is too hard and rarely flexible and will NOT work! I have the same pressure CV boot gun and it will NOT spread a "normal" CV boot, you really need to ask the shop for a FLEXIBLE one, otherwise you will be highly disappointed and end up like me removing the whole CV axle and CV joint from the car in order to install a new CV boot.

    • @victorsandoval1060
      @victorsandoval1060 Před 2 lety +3

      Good tip! I didn’t realize they had axle boots that are more flexible. I would have ended up like you if I didn’t see your comment thank you!

    • @richarddiaz8248
      @richarddiaz8248 Před rokem +3

      Brute I though about that my boots are not flexible enough thank goodness I saw this

  • @MSN-82
    @MSN-82 Před rokem +1

    The voice of the commentator is just like Uhtred of Bebbanburg.

  • @ederangelo21
    @ederangelo21 Před 10 měsíci

    My friends, what price an mechanic want to change an CV BOOT in USA AND Europe ? Some can reply me ?

    • @TheToolconnection
      @TheToolconnection  Před 10 měsíci

      This can be found on Amazon; www.amazon.co.uk/Laser-4806-Cv-Bootgun/dp/B003AMZL7W?ref_=ast_sto_dp&th=1

  • @iwanaza3861
    @iwanaza3861 Před 2 lety

    mantap.harganya berapa

  • @johncollins8304
    @johncollins8304 Před 2 měsíci

    Turn on subs, turn off sound.

  • @azizaviation
    @azizaviation Před rokem

    Where can I buy the boot expanding tool?

    • @TheToolconnection
      @TheToolconnection  Před rokem

      Any Laser Tools dealer will be able to get one in for you, and we have online partners that will also be able to assist you, including these guys; www.thetoolacademy.com/laser-4806-cv-bootgun-1930-p.asp