In this video, you will learn how to create chains in solidworks assembly environment. *** Don't forget to LIKE our videos and SUBSCRIBE our channel / @noncadkeys
Now how do you place the special attachment link with the ears every 4th link, instead of every other link? i.e. 3 regular links, then the special link with the ears.
It is not possible to do this with a single Chain Pattern. Maybe you need to use Chain pattern > Pitch Method > Distance Linkage several times individually. Then you may need to mate the 3rd and 4th (eared) chain groups you get. It's definitely something that will need some work on it.
Bizimde tam olarak hedefimiz bu. Uzun uzun anlatmaya gerek yok. Kısa, öz, nokta atışı içerikler. Umarız faydalı olmuştur. Dahası ve daha fazlası gelecek. Takip etmeyi, beğenmeyi ve önermeyi unutmayın ;)
This command of Solidworks generally allows making a chain with 2 pieces. If you want, send me the chain or piece you want to make. I can check if there is a way to make the application you want.
@@mathewmoreno4173 You can access the assembly file at grabcad.com/library/solidworks-simulation-bolt-connection-1 . If you want a part file version of the assembly, you can save the assembly as a part. If you need simulation study of this file, unfortunately we haven't done any work on it yet.
What I mean is there is no commentary to go with the visual. Many people like me need both audio and visual to get the most out of training videos. Especially when you're demonstrating something new to a viewer.
Hello Dave, the purpose of the channel is to convey the programs to you, valued users, with short, concise and to-the-point information without making long explanations. However, we are also considering holding lessons when the channel reaches a certain maturity. If there is a topic or feature you are curious about, you can let us know by commenting. We can prepare more detailed content on that subject. We can also support it using subtitles. When determining the topics, we prioritize our follower requests and take care to create content in a short time. Thanks for following...
Videolarınız kısa ama etkili. Tek videoda bir konuyu işliyorsunuz. Kanalınızın büyümesini dilerim.
İyi dilekleriniz için teşekkürler Mehmet bey. Yorumlarınız ile amacımıza ulaştığımızı görmek bizi mutlu ediyor.
Now how do you place the special attachment link with the ears every 4th link, instead of every other link? i.e. 3 regular links, then the special link with the ears.
It is not possible to do this with a single Chain Pattern. Maybe you need to use Chain pattern > Pitch Method > Distance Linkage several times individually. Then you may need to mate the 3rd and 4th (eared) chain groups you get. It's definitely something that will need some work on it.
konuşmadan anlatmadan olayı izah etmek :) videoların devamını dilerim.
Bizimde tam olarak hedefimiz bu. Uzun uzun anlatmaya gerek yok. Kısa, öz, nokta atışı içerikler. Umarız faydalı olmuştur. Dahası ve daha fazlası gelecek. Takip etmeyi, beğenmeyi ve önermeyi unutmayın ;)
Benim gibi sesini beğenmiyordur belki de :)
😅 Ses değil icraat önemli diyelim.
I want to do three groups chain is there any way
This command of Solidworks generally allows making a chain with 2 pieces. If you want, send me the chain or piece you want to make. I can check if there is a way to make the application you want.
I can't watch when you're looking construction plane trough tree :)))
:)
How to make a simulation STUDY?
Could you ask in a little more detail? Do you want Simulation study or animation study? Because these two get mixed up a lot.
@@NonCADKeys Im sorry, I just need the Simulation Study, knowking the von misses stress, displacement, etc. Can I have the part file?
@@mathewmoreno4173 You can access the assembly file at grabcad.com/library/solidworks-simulation-bolt-connection-1 . If you want a part file version of the assembly, you can save the assembly as a part. If you need simulation study of this file, unfortunately we haven't done any work on it yet.
How to make a path
czcams.com/video/IJwHPyGbAvM/video.html
You can learn from this video.
@@NonCADKeys HOW TO MAKE A SIMULATION STUDY OUT OF THIS CHAIN?
I only speak english and and need dialog to go with the visuals to be useful to me. Dave Hadden
Hi Dave,
Sorry, I don't know what you mean.
What I mean is there is no commentary to go with the visual. Many people like me need both audio and visual to get the most out of training videos. Especially when you're demonstrating something new to a viewer.
Hello Dave, the purpose of the channel is to convey the programs to you, valued users, with short, concise and to-the-point information without making long explanations. However, we are also considering holding lessons when the channel reaches a certain maturity. If there is a topic or feature you are curious about, you can let us know by commenting. We can prepare more detailed content on that subject. We can also support it using subtitles. When determining the topics, we prioritize our follower requests and take care to create content in a short time. Thanks for following...