Multi-source Installation: Solar Power, Generator, Grid - Complete Guide with Diagram

Sdílet
Vložit
  • čas přidán 6. 07. 2024
  • Multi-source Installation: Solar Power, Generator, Grid - Complete Guide with Diagram:
    Learn how to create a multi-source electrical installation integrating solar power, a generator, and grid power. In this comprehensive guide with a diagram, I explain step-by-step how to secure your installation and prevent short circuits and fires.
    We will start with a reminder of the importance of verifying the absence of voltage before any intervention. This tutorial is intended for DIY enthusiasts who want to understand the basic principle of a multi-source electrical installation. You will learn how to use circuit breakers, contactors, and distributors to manage your different energy sources: solar panels, generator, and grid.
    Each step is detailed so you can follow the electrical diagram from the power part to the control part. You will discover how to wire each component and test the installation to ensure its proper functioning.
    Whether you are interested in integrating solar panels for renewable energy or adding a generator for backup power, this guide is for you. Follow this tutorial to the end and ensure the continuity of your power supply in all circumstances.
    ▬▬▬▬▬▬▬ 🟢SUBSCRIBE TO THE CHANNEL 🟢 ▬▬▬▬▬▬▬▬▬▬▬
    🟦► bit.ly/3wZ9YFS
    🟠 TO SUPPORT THE CHANNEL 👉👉 fr.tipeee.com/99outils 👈👈 🟠
    ▬▬▬▬▬▬▬ 🔵RECOMMENDED TOOLS🔵 ▬▬▬▬▬▬▬▬▬
    ► Time-delay relay: amzn.to/4eIeDTk
    ► Switch: amzn.to/3zc2hT8
    ► Automatic wire stripper: amzn.to/3QZQ0Ht
    ► Cable cutter: amzn.to/3UXTHOV
    ► Wago: amzn.to/3EsP1bT
    ► Screwdriver: amzn.to/4aDMWaP
    ► Multimeter: amzn.to/3WZdnEU
    🟩/ CHAPTERS / 🟩
    00:00: Introduction
    00:29: Safety reminder.
    00:57: Tutorial overview.
    01:17: What I need for my electrical installation.
    02:34: Presentation of the power part of the electrical diagram.
    04:55: Presentation of the control part of the electrical diagram.
    08:45: Schematic operation of source 1.
    10:52: Schematic operation of the installation.
    ▬▬▬ 🔵🟠 PLAYLISTS🔵🟠 ▬▬▬
    ⚫- Mastering Switching Relays ➡️ • Maîtriser les Relais d...
    ⚫- Electric motor ➡️ bit.ly/3aAOv02
    🔴- Source switcher, Generator, Solar panels, Renewable energy, Photovoltaic solar panel ➡️ bit.ly/3O0XiHV
    🔴- Electrical safety ➡️ bit.ly/3vKLxhV
    ⚫- All about an electrical outlet ➡️ bit.ly/3gqZ5Gq
    🔴- Differential fault - differential switch fault or differential circuit breaker fault ▶️ bit.ly/3IUYXeG
    🔵- All about circuit breaker or differential switch ➡️ bit.ly/3GuKZyt
    🟤- All about a switch or button ▶️ bit.ly/3ru45AF
    🟣- All about a timer ➡️ bit.ly/34fYKUw
    🟢- Contactor - breaker, all you need to know ▶️ bit.ly/3J15p3K
    🟡- All about a time switch, astronomical time switch, twilight switch, electric meter ➡️ bit.ly/3ulwtqq
    🟠- All about a stepper switch ➡️ bit.ly/3sgfyCP
    ▬▬▬▬▬▬▬ 🟢FACEBOOK GROUP 🟢 ▬▬▬▬▬▬▬▬▬▬▬
    🟦► groups/electricitefacile/
    ▬▬▬▬▬▬▬ 🟠Blog/Social Networks Links🟠 ▬▬▬▬▬▬▬▬▬▬▬
    ► www.99outils.com/blogs/tout-s...
    ► / 99outils
    ► www.pinterest.fr/99outils/
    🟠 - Disclaimer:
    Some links may be affiliate links. As an Amazon and ManoMano Partner, I earn a small commission on qualifying purchases. This means that if you make a purchase through the links in the description, I earn a small commission through these links.
    And this allows me to buy certain electrical equipment to make the tutorials.
    Of course, it costs you absolutely nothing extra, just a little help for the channel.
    #solarpanels #generator
  • Věda a technologie

Komentáře • 26

  • @99outils
    @99outils  Před 7 dny +3

    🟠 POUR SOUTENIR LA CHAÎNE 👉👉 fr.tipeee.com/99outils 👈👈 🟠

  • @John_7591
    @John_7591 Před 4 dny

    Bonsoir, Bravo pour votre pédagogie ! ... C'est très clair pour le novice que je suis. Un grand merci pour le partage de vos connaissances et de cette chouette vidéo. À très vite pour la suite.

  • @carlosmigueltapia244
    @carlosmigueltapia244 Před 6 dny +2

    Bonjour ca fait plaisir de vous revoir. Tres interesant. Merci

  • @bertrandelavega
    @bertrandelavega Před 7 dny +2

    J'en veut encore Et encore des videos comme ça.

  • @amadouboiro498
    @amadouboiro498 Před 7 dny +2

    Très intéressant et très professionnel merci beaucoup

  • @69PlombierChauffagisteRamoneur

    Salut 99 bon samedi soir :) bon week end je partage :) /alex

  • @Edje_workshop
    @Edje_workshop Před 7 dny +1

    Génial !

  • @Abdoul-fattahMohamed-ps3gg

    Je tiens à vous remercier pour ce excellent travail.
    Merci beaucoup

  • @urbainzokouendet8739
    @urbainzokouendet8739 Před 4 dny

    bjr monsieur, j'ai trouvé cette vidéos très intéressentes et je me suis abonné svp🙏🙏🙏🙏 pouvez aussi expliquez le schéma d'une installation automatique à plusieurs sources.

  • @MERDISUNDA-v1o
    @MERDISUNDA-v1o Před dnem

    Merci encore une fois pour cette nouvelle et belle vidéo inspirante mais cela sera vraiment très complexe au cas où le groupe s'arrêtait donc tout le système est interrompu aussi vue que c'est le groupe donc la troisième source qui alimente les contacteur donc quelle solution peut-on apporter pour résoudre ce problème merci !!

  • @nouhoumdiarra1868
    @nouhoumdiarra1868 Před 7 dny

    L´explications est formidable,mais j'aimerais te poser une question, si on veut fonctionner ces différentes sources avec automatique sans commutateur et on met le groupe électrogène en troisième position ?. Merci beaucoup pour la bonne compréhension.

    • @99outils
      @99outils  Před 7 dny +1

      Bonjour, l'installation sera beaucoup plus complexe....

  • @77Pipiou
    @77Pipiou Před 7 dny

    Merci pour ce tuto. 💪
    Pour chez moi, en triphasé, je dois donc multiplier la manœuvre par trois ?
    Ou alors choisir une des trois phases pour y mettre mes indispensables : machine médicale, frigos et congélateurs...🤔

    • @99outils
      @99outils  Před 7 dny

      Bonjour,
      Pas spécialement !! Est ce que votre groupe électrogène est aussi en tri ?

    • @77Pipiou
      @77Pipiou Před 7 dny

      @@99outils non, il est mono.

    • @99outils
      @99outils  Před 7 dny +1

      La modification se fera surtout côté puissance. La partie commande ne changera pas. "Ou alors choisir une des trois phases pour y mettre mes indispensables : machine médicale, frigos et congélateurs..." peut-être la solution.

    • @BoxAndroid-ee3kf
      @BoxAndroid-ee3kf Před 6 dny

      Merci beaucoup.🙏🏿🙏🏿.

  • @souleimaneaboudou8239

    C'est tres bien ,Mais de quel source de tension on alimentera les bobine de commande, pas exemple si c'est avec le générateur on alimente la commande et puis elle est coupé, comment alimenté les deux autres sources de tension.

    • @99outils
      @99outils  Před 4 dny

      Bonjour, n'hésitez pas à regarder dans le commentaire !! J'ai déjà répondu à cette question 🙂. Par ailleurs, dans le vidéo de câblage qui sortira bientôt, je vous explique tout en détail. Au plaisir 🙂

  • @FabriceMaillot-b3p
    @FabriceMaillot-b3p Před 5 dny

    Je souhaiterais savoir par quelle source le circuit de commande est alimenté ?

    • @99outils
      @99outils  Před 5 dny

      Bonjour, source 3. Cette partie sera expliquée dans la vidéo de câblage qui sortira prochainement.

  • @Wilfrid-fs3cb
    @Wilfrid-fs3cb Před 6 dny

    Oui c'est bien développé mais est il possible de mettre les 3 sources automatiquement

  • @pierreheyligen4834
    @pierreheyligen4834 Před 2 dny

    Ce n’est pas sans coupure il y a un arrêt d électricité dans le passage de l un à l autre