ive learned from tacullar that you can put that last command in your steam settings for rust under “launch options” and it will automatically apply everytime you start rust so you dont have to press f5
Thanks warr, mostly i have the same options/binds but i have 5k hours and did not knew that show blood actualy removes that curse hahah. I think you saved some players tilt reason when low hp.
the biggest thing ive noticed from these new rust videos is the lack of volume with your mic when you talk.... other than that. great video and ill def be using these settings
Here's a quick tip for those struggling with updating their cfg settings regularly and wanting to avoid pressing F5 each time they load the game: you can convert the cfg file into a read-only file. This prevents automatic changes, allowing you to modify settings when needed. Simply uncheck 'read only,' make your adjustments, save, and then check 'read only' again. You can locate the cfg file by navigating to C:\Program Files (x86)\Steam\steamapps\common\Rust\cfg.
glad your playing again bro your definitely still the best player in my opinion i have copped these giga chad settings bro and let me tell you there amazing i actually can play now without fps drops
Even tho it was kind of boring I love that you explained everything. If you are a new player you don’t always know what this or that means and we’re just watching someone change shit that doesn’t make any sense so thank you for that 🙏
Hello, everyone. I understand that personal preference plays a significant role, but I'm seeking advice on whether it's more effective to play with a lower sensitivity for improved aim (enduring a challenging spray until you adapt) or a higher sensitivity for a more agile spray, adjusting to the aim over time. Drawing from my experience in CS as a Level 10 Faceit player with over 13,000 hours, I would recommend new players to acclimate to a lower sensitivity for consistent aim. However, these games differ, as CS maintains a constant map and angles, whereas Rust features a random map with constantly changing angles, excluding the monuments. Given these distinctions, what sensitivity should I opt for?
given that you are accustomed to a lower sense i would favour that, i was much the same before i started playing rust and still am. that being said I do think slightly raising your sense would be beneficial for close range pvp, i personally run 800 dpi with a 0.3 and a 0.15 ads, its important to note that from what I've heard this is still on the lower end for rust. what's important is that this is a tad bit above what I run in most other games and I recommend you do the same. hope this helps, feel free to ask more questions!
i would think a higher sens for rust since you can be less precise and the spray control is harder, but i’m pretty bad at rust so take what i say with a grain of salt :) my sens: 800dpi .4 in game
one time i was playing around with the setting just sitting on a boat outside of harbor where the barrels spawn in the ocean. harbor was a blur and the moment I turned on sharpen I realized 3 guys were pushing towards the edge near recycler and started blasting me and then I saw the difference.
keep it up bro, glad you found yourself and worked out whatever , im sure it was just from your ole girl leaving , but i try to quit rust and i cant, damn best game ever made haha.... cheers
Playing on an nvidia GeForce, Gtx 1060 3gb with graphics quality on HIGH I was getting 40fps average roaming around and inside the base is 60fps and now I get consistent 60 FPS I also had to turn VSYNC back on because of screen tears but I feel like that’s because my monitor can’t handle more than 60 and with it turned off, it was spiking to like 75 FPS
I picked up a razer Naga to have more buttons on the side of my mouse. All item slots 1-6 are on the mouse as well as a few macros and all the original settings as well. Once you get used to it, it becomes a world changer. No more having to fumble around the keyboard for things other than map toggle and duck. It becomes impossible to play any other game without having 90% of commands dedicated to the mouse.
2 questions for the commands. When I load up rust do I have to re type the commands? And also when I join a new server do I also have to re type in the commands?
warrior what about the focus setting where u press a keybind and when you are looking at somewhere random in the map it immediately comes back to wherever your player is
my graphics card is so bad plus its also integrated so i have to play on potato and everything 0 besides draw distance or my freeze framing is way worse 😥
Bro I didn’t even say anything out load my friend said it in discord “u need to config your settings bruh” not even 2 mins ago and this shit upfront in the recommended
anyone have any tips to keep the potato look but get rid of all the annoying waving textures and jagged edges? i just upgraded from a 1060 to a 4060 and im not going to lie my game looks EXACTLY the same. jagged af and textures flashing idk wtf to do
Without a doubt one of if not the MOST asked questions is "WHAT ARE YOUR SETTINGS" so just in time for new year ENJOY
thanks
W
After 11k hours I did not know about the blood option
What’s your DPI set to dude?
@@Dusty4u mans has 11k hours in the main menu
You skipped over the Shadow Cascades. Set that option to No Cascades so that light goes through walls. Gives a massive nerf if you have it enabled
ive learned from tacullar that you can put that last command in your steam settings for rust under “launch options” and it will automatically apply everytime you start rust so you dont have to press f5
With or without the quotes?
@@ruiggsgonext without
do you just copy all 7 cmds in the launch option or only the f5 one?@@bobstar285
Hey, can you send what you put in the launch options please , thanks bro
just make a massive f5 command with all the garbage collection commands added in, then it will make sense to have everything assigned to one button
Thanks warr, mostly i have the same options/binds but i have 5k hours and did not knew that show blood actualy removes that curse hahah.
I think you saved some players tilt reason when low hp.
the biggest thing ive noticed from these new rust videos is the lack of volume with your mic when you talk.... other than that. great video and ill def be using these settings
just u mate the sounds fine
@@lunar7240 he's definitely quieter in this vid than most other youtube videos. I had to turn my amp way up
This is perfect i got rust pc two days ago and have 12 hours total thanks warrior❤
I have 20hrs, i feel it brotha 😂🤙🏽
@@KAP0112 I HAVE 300
I just started two days ago😅
Here's a quick tip for those struggling with updating their cfg settings regularly and wanting to avoid pressing F5 each time they load the game: you can convert the cfg file into a read-only file. This prevents automatic changes, allowing you to modify settings when needed. Simply uncheck 'read only,' make your adjustments, save, and then check 'read only' again. You can locate the cfg file by navigating to C:\Program Files (x86)\Steam\steamapps\common\Rust\cfg.
shouldn't u just use launch options?
glad your playing again bro your definitely still the best player in my opinion i have copped these giga chad settings bro and let me tell you there amazing i actually can play now without fps drops
13:50 my scroll wheel is already broken so im already a scroll-less gamer haha good tips 🙏
Even tho it was kind of boring I love that you explained everything. If you are a new player you don’t always know what this or that means and we’re just watching someone change shit that doesn’t make any sense so thank you for that 🙏
its a simple video just get the settings and job done u muppet
bros biceps are staring at me seeing a lot of progress 👍
Warrior thank so much, this video was great. I needed this. I appreciate you sharing. Welcome back!💪
Not even finished and great video so far lot of work gone into this and really well done!
First + I've been needing your settings since the Unban Warrior Era
Hello, everyone. I understand that personal preference plays a significant role, but I'm seeking advice on whether it's more effective to play with a lower sensitivity for improved aim (enduring a challenging spray until you adapt) or a higher sensitivity for a more agile spray, adjusting to the aim over time. Drawing from my experience in CS as a Level 10 Faceit player with over 13,000 hours, I would recommend new players to acclimate to a lower sensitivity for consistent aim. However, these games differ, as CS maintains a constant map and angles, whereas Rust features a random map with constantly changing angles, excluding the monuments. Given these distinctions, what sensitivity should I opt for?
400-800 dpi
ingame sens 0.5
ADS 0.35
high sens for stand up spraying
given that you are accustomed to a lower sense i would favour that, i was much the same before i started playing rust and still am. that being said I do think slightly raising your sense would be beneficial for close range pvp, i personally run 800 dpi with a 0.3 and a 0.15 ads, its important to note that from what I've heard this is still on the lower end for rust. what's important is that this is a tad bit above what I run in most other games and I recommend you do the same. hope this helps, feel free to ask more questions!
i would think a higher sens for rust since you can be less precise and the spray control is harder, but i’m pretty bad at rust so take what i say with a grain of salt :)
my sens:
800dpi
.4 in game
Lol rust isn't an aim game anymore, it doesn't matter
Happy new year, mate! :))) all best fot you! =]]
*You earned my subscription just by looking & sounding like Tom Hardy* 👩🏻
is promoting these gambling sites for your viewers to lose money worth it?
Cry bout it
Dude he is not forcing anyone to use them😂
Dont gamble then lolll
Fr a sponsorship is a w anyway
loser mentality
do you plan to make a separate channel for your gym stuff?
You don’t need to do the gc collection command because in experimental settings the gc collection thing does it automatically
Everyone luvs warrior❤❤❤
MY MAN ALEX IS BACK
The only youtuber that looks like a rust character! I don't know if you mean to do that but we'll done 😂
I quit from rust for a almost 2 year I guess and yoo warrior you jacked dude
Hey the man the myth the legend is back!
who is this fitness streamer tryina tell me how to play rust? JK ily bro, welcome back :D
one time i was playing around with the setting just sitting on a boat outside of harbor where the barrels spawn in the ocean. harbor was a blur and the moment I turned on sharpen I realized 3 guys were pushing towards the edge near recycler and started blasting me and then I saw the difference.
I actually gained like 30-40 fps with these settings! Thanks
Will the gym videos be back? (I like both the rust and gym videos)
Im going to be back to this vid once I get a pc from my own money, maybe like 2-3 years afterwards, I'm studying for entering a good college.
graphic.vm_sclale true is also very helpful to make your reticle smaller
Happy New Year!))
nice. happy 2024
keep it up bro, glad you found yourself and worked out whatever , im sure it was just from your ole girl leaving , but i try to quit rust and i cant, damn best game ever made haha.... cheers
Playing on an nvidia GeForce, Gtx 1060 3gb with graphics quality on HIGH I was getting 40fps average roaming around and inside the base is 60fps and now I get consistent 60 FPS I also had to turn VSYNC back on because of screen tears but I feel like that’s because my monitor can’t handle more than 60 and with it turned off, it was spiking to like 75 FPS
This man quit the game to get swole real quick and then went back to usual lmaoo
whole lot of yappin
you got any tips for someone who just started playing
u earned sub :)
Thx g this is so good
hello and welcome back to daddy waz
what about graphics.vm_fov_scale false
Love you long time ⌛️
why did you stop uploading the gym vids or did you make a separate channel for it?
The best setting here Warrior
I picked up a razer Naga to have more buttons on the side of my mouse. All item slots 1-6 are on the mouse as well as a few macros and all the original settings as well. Once you get used to it, it becomes a world changer. No more having to fumble around the keyboard for things other than map toggle and duck. It becomes impossible to play any other game without having 90% of commands dedicated to the mouse.
lookin big warrior
Thanks Warrior
Is there a keybind for turning on and off blood? I can't tell when I'm about to die without it, but it's too obnoxious.
Goat
we back
Big ups, thank ya
2 questions for the commands. When I load up rust do I have to re type the commands? And also when I join a new server do I also have to re type in the commands?
One command i really like is to hide my feet, so nothing is distracting me more than necessary
BESTTTTTTTTTTTTTTTTTTTTT🦍
I personally like scroll wheel for my hotbar, all depends on how tactile your scroll switch is ig.
just get good and use numbers lol
tiktok brain cant handle pressing a couple numbers
LEGEND!
when i go into a new server do i need to put all these commands in again?
Warrior you look great
Can you tell me what kind of cursor you have?
what dpi mouse he plays with ?
What your dpi ?
thx warrior
Where did the gym vids go?
Learned today I'm the same age as warrior.
yeah man haha i like your content
These settings would be equal using a high end GPU? I have a 4090 and a 1440p 240htz monitor
Well its in the video title what these setting are for
warrior what about the focus setting where u press a keybind and when you are looking at somewhere random in the map it immediately comes back to wherever your player is
@@kidonchrome1107 what a load of waffle
@@CCRust man said it was an f1 command 🤣🤣🤣🤣
LMAOOOOOO I THOUGHT YOU WERE TALKING AB THE ZOOM IN COMMAND HAHAHAHAHH @@Vinay-yy1yp
@@kidonchrome1107 naaa bro i was talking about the map 🤣
MAP - bind g +map;+focusmap
w vid fr
gym vids not paying the bills?
Why did these settings make my character and some objects like bushes and trees look like a blob and blurry?
I want to know your mouse's dpi and built-in settings =>LIKE ME 400 DPI X sensitivity 0.4
Max physics steps to 60 is great and will help with a lot of harder crouch / super jumps
I thought this was made a admin-command quite some time ago?
@@peccus7743 they can just limit what the server will allow. It's still limited by the client
in experimental put on sharpen and fxaa
How did you get that you See where the damge come from
What's you Nvidia colours?
What’s your mouse dpi?
what is the dpi can someone please tell me?
I wanna know how to shot ak like a proplayer. Them use script recoil or not ?
no one uses scripts
W
Hey my problem is when i use max gibs in rust to -1 it will reset after i restart game
How to fix it?
Now show best lua settings
Dpi?
Where can I see your pc spec info? I wanna know how much do I pay for pc get 120+ fps on rust
I think in his dc
like 1 k
my graphics card is so bad plus its also integrated so i have to play on potato and everything 0 besides draw distance or my freeze framing is way worse 😥
get a job
DPI?
Bro has a pharmacy in his room
Alright am I loosing my mind what happened to your gym videos???
dpi ?
Are you back on rust?
what dpi
Thought u were Tyler1
what is your sensitivity in mouse?
0.55
Face reveal pls
This made it darker,
do u use any rust launch options?
-physics.steps 60 -gc.buffer 4000 -headlerp_inertia 1000 -graphics.branding 0 "-effects.maxgibs -1 bind v "+fov 90;fov 70" bind g +map;+focusmap bind Mouse1 +lighttoggle;+attack2
yuh
Bro I didn’t even say anything out load my friend said it in discord “u need to config your settings bruh” not even 2 mins ago and this shit upfront in the recommended
what about dpi
anyone have any tips to keep the potato look but get rid of all the annoying waving textures and jagged edges? i just upgraded from a 1060 to a 4060 and im not going to lie my game looks EXACTLY the same. jagged af and textures flashing idk wtf to do
i ask because players further than 50 yards legit are just dancing jagged edges on my screen. cant see shit
@@doot6516 same i wetn from 1650 to 4060ti and game looks pretty similar with the flickering jagged edges only change was really a smoother fps
@@kevinrogers7438 same exact issue over here man. my friend told me to try a display port which im picking up tomorrow and i hope thats the issue
@@doot6516lmk if that works I've watched so many vids n still can't find a good solution
@@doot6516 Did you fix it? I think you're talking about anti aliasing. Make sure to enable it