Blackberry Torch 9800 Disassemble Guide

Sdílet
Vložit
  • čas přidán 8. 05. 2011
  • www.DealsiShop.com - Blackberry Torch 9800 Disassemble Guide. This video will show you how to take apart Torch 9800, includes housing disassely, Remove Touch Screen, keypad... We carry most replacement parts for Blackberry Torch 9800: www.dealsishop.com/9800.html
  • Jak na to + styl

Komentáře • 40

  • @moeburn
    @moeburn Před 12 lety

    Thank you a million times for this video! Yours is the only disassembly guide for the 9800 Torch that is in 1080 HD! I used your video to take apart my Torch so that I could replace the ribbon cable for the front main four buttons that go around the trackpad, with a new one I ordered off ebay for $3; they were defective and either didn't work, or didn't trigger the correct button when pressed. Your guide saved me hundreds of $ on a new phone! Now a reverse assembly guide would be great...

  • @tweettokes5606
    @tweettokes5606 Před 11 lety

    if your still wondering you have to just pry it off starting from the top of the black cover thing . the cover might break

  • @wilmer1612
    @wilmer1612 Před 9 lety

    Excelente Trabajo. Felicitaciones.

  • @ebonypuss
    @ebonypuss Před 10 lety

    Very good work

  • @pipo6670
    @pipo6670 Před 12 lety

    Thank you very much is a very instructive video. But I want to know how to replace physical elteclado delBB 9800. Thank you

  • @31parc
    @31parc Před 11 lety

    gracias parcero muy bueno me sirvio demasiado

  • @nikmamad
    @nikmamad Před 8 lety

    VERY WELL DONE
    Thank you

  • @qendilii
    @qendilii Před 13 lety

    thanks done all of it same but the loud speaker gone hm i guess need open it again

  • @dmoneyCEO
    @dmoneyCEO Před 12 lety

    what do u do if the screws in the back your phone are stripped? help bc i have the new white housin case already

  • @danieldelira
    @danieldelira Před 12 lety

    is there any replacement part for the closed slide sensor, my virtual keyboard doesnt show up when i close the device. thanks

  • @XPLiCiTBaRZ
    @XPLiCiTBaRZ Před 12 lety

    I've broken the slider on my blackberry, and it doesn't stay when I slide it up, it just slides down, I have to manually hold it up to type, and ideas on how to help?

  • @gsusgp
    @gsusgp Před 11 lety

    how did u remove the ear speaker? it comes out by itself?

  • @pablovrela2402
    @pablovrela2402 Před 9 lety

    Falto algo muy importante !!!! Como sacas el display,cosa que es imprecindible saberlo !! 5pts el video

  • @xzwy123
    @xzwy123 Před 12 lety

    me pregunto si luego de hacer esto el cel queda igual que antes??? o queda flojo o algo asi??

  • @gramboliciousness
    @gramboliciousness Před 12 lety

    I don't know... when the video starts with describing the tools laid out from "left to right", and what you see is laid out right to left...
    Aaaahhh fuck it, I'm tearing mine apart right now!

  • @vilavagames
    @vilavagames Před 8 lety

    Please help my phone buttons is not working i mean the action buttons between the mouse

  • @tweettokes5606
    @tweettokes5606 Před 11 lety

    you have to pry it off carefully

  • @DeLarryfication
    @DeLarryfication Před 11 lety

    Screen does not rotate on my 9810. The covers were recently changed and thats when this problem occured. Maybe it was pressed too hard when screwing it up. So can someone help me with the location of the rotation sensor (wondering if thats what its called).

  • @gigiflavor
    @gigiflavor Před 12 lety

    Does anyone here that owns a Torch 9800/9810 have any issues with the slider mechanism making a mild "sliding" noise? It sounds almost like a peice of sand paper rubbing on smooth paper, its not a bad sound or anything, and you can only hear it if you hold it close to your ear, sometimes once and a while when I open and close it by pushing down on the lower lower part of the screen (right above the trackpad) the screens movement makes a weird light grinding or scraping kind of noise. Any ideas?

  • @uggoki786
    @uggoki786 Před 13 lety

    i have changed the lcd of my blackberry 9800 bt after tht the touch is not working i have tried 4 different touchs bt all the same result...... bt when i put the same board on another blackberry touch is working wot cn be the problem ??

  • @JaydabeTheMaestro
    @JaydabeTheMaestro Před 12 lety

    If I bought the screen, how much would you charge to fix my cracked torch?

  • @jonathannarutomadara
    @jonathannarutomadara Před 12 lety

    how do you change the keypad?? everyone ignores the keypad!!!

  • @sarwantobudi
    @sarwantobudi Před 12 lety

    to open its lcd you can see here " OPEN LCD TORCH"

  • @siibing
    @siibing Před 9 lety

    Style 9670 please..

  • @supermario1006
    @supermario1006 Před 11 lety

    thats sooo true becuase he cut part of the video at 4:34

  • @Snowstyla
    @Snowstyla Před 11 lety

    i even broke my screen, nice howto...

  • @James24292
    @James24292 Před 12 lety

    si que sabes desmantelar una blackberry he

  • @Naczelny83
    @Naczelny83 Před 10 lety

    torx T4 and T6

  • @moeburn
    @moeburn Před 12 lety

    I just checked out your DealsiShop site for parts... wow am I ever glad I ordered off of eBay and not you! Talk about over-charging!

  • @TheMeshe11
    @TheMeshe11 Před 12 lety

    well shit vuz now my phone dont work since iv put i back

  • @ballerinabeach
    @ballerinabeach Před 12 lety

    So much harder than I thought it was going to be!! #nevermind

  • @ondrik06
    @ondrik06 Před 11 lety

    didint show how to take out the keyboard

  • @DeissyTovar
    @DeissyTovar Před 9 lety

    O

  • @gligorvlad7321
    @gligorvlad7321 Před 10 lety

    omg..

  • @tintintheman01
    @tintintheman01 Před 12 lety

    now. throw it in the trashcan haha

  • @xPMoonWOLFxD
    @xPMoonWOLFxD Před 12 lety

    You have now fucked up your phone;) great job

  • @MultiDrugie
    @MultiDrugie Před 11 lety

    just smash it thats how you dissassemble it

  • @tweettokes5606
    @tweettokes5606 Před 11 lety

    sausage fings

  • @nelsonv220
    @nelsonv220 Před 12 lety

    it was predissasembled!!! lier!!