Join this channel / @greatlakespowerstrokefx4 If anyone has any questions or comments or you just want to say hello, feel free to email me at Greatlakespowerstrokefx4@gmail.com
After owning 2002,2002,2008,2011,2016,2019 Superduty F350's diesels and now 2024 7.3 F350 I must say it's a great truck. Got 10k on it too. Flawless as well. Will be taking it across country this coming summer with truck camper. Wish me well.
Have a great trip, be sure to stop and enjoy all there is to do. Most of my road trips for work end up being there and back as fast as i can and i know im missing out on so much. There is a steam train museum iv driven last on the way to Philadelphia now 3 times i havent stopped.
These 7.3s are going to be amazing when they get all the bugs 100% worked out. The lifter issues still have me apprehensive of the 7.3 Godzilla at this point. Would make a great option for most who aren't towing daily but have a large RV or equipment to move and don't want to deal with new diesels emissions (can't make them disappear easily in many states). The 7.3 has been swapped into a 1965 Shelby A/C cobra and it's insane!
Ill report if mine has a cam failure. So far so good. This engine in a light car would be so much fun. I mentioned id like to have a police pursuit crown vic with one and im not kidding.
I'd like to grab one of these also but as you mentioned there is reports of lifter/cam issues. Here's what I get from that. It's a very small percentage of trucks that run into that issue. They say it's more so the rv's and box trucks that have that issue. Idling for long periods was all mentioned as they don't get enough oil pressure. I also heard it's mainly the trucks that were built in the covid era as the supply chain was messed up and Ford had to source parts from different manufacturers. I was actually at a local Ford super duty shop today and I spoke to the service manager about that issue. He claims he has never had a f250 come through the doors with those issues. Now the 10 speed transmission issue some people are having is a different story. I think a lot of that has to do with the tuning. And apparently in 24 Ford changed some stuff in the transmission so maybe it's resolved now. Ford sure does have tyranny issues tho. I have a mt82 in my Mustang. So far it's been good to me but it gets a lot hate. Same thing with the 10r80 that are in those cars. Once people start putting more power to the ground they start having issues.
@@lobbyrobby your info sounds spot on from my understanding. I had a mt82 in a mustang as well, a 2014 track pack. Good car and the trans was fine for everything but speed shifting. I even had a ford racing short throw shifted. You had to be very careful crossing the gate because the trans rocked when you shifted and the distance to the next gear would change. I should have kept that car it was a fun daily
@@greatlakespowerstrokefx4 I have a mgw that's not installed yet and a braided clutch line. People swear an aftermarket clutch really helps with 3rd gear lockout. I don't want to go that far yet. My car is boosted but I'm only at 600whp because of shitty 91 octane. And yes, I said only lol. The supercharger kit is capable of much more. In all honesty tho 600 whp is perfect for a fun street car. When it's cold out the car really struggles for traction anyway and I have zero desire to run a drag pack.
I'm currently driving a 2018 F205 Diesel for personal use and I love the low end torque. No need to floor it to feel the speed and power. I also drive a 2019 F250 6.2 gasser and it just doesn't have any low end torque. So it's a little slow and not too fun to drive, I mean you have to floor it to feel some power. That being said, do you think the 7.3 Godzilla is a fun engine to drive like a diesel? I know it won't pull like a diesel but I'm wondering if it's fun for normal in the city driving like a diesel.
Bro I came from an 05 silvwrado into my 22 7.3 and literally I said to myself one day "holy crap this is a modern reincarnation of the GMT800 platform" Spot on on your analysis.
Yes I have a 2022 Lariat 150 with the baby 6 and I can hear a pin drop maybe when it’s running. It has the sound mat so I checked this morning. I don’t have a reason for the big ones anymore but I live vicariously through you. Great Video Thank You 🙏
Great video; I appreciate your knowledge; I learned a lot. I have the 6.8 in a 23F350 CC XL STX and love it so far. Lots of power for me but my first super duty.
The 6.8 sounds like a good option. Eventually the aftermarket is going to love boosting them. The shorter stroke means less piston speed so less load on the rotating assembly. I wonder of the heads are the same as the 7.3. 415 ci is still a very reasonable amount of displacement to work with. Id like to drive one
Man, you know a lot about trucks and vehicles. I'd like to buy you lunch one day, if you're ever over this way. Me: 23f250, Lariat LB, 7.3, 373e, 2alt, 2batt, etc.etc. Thanks for sharing your knowledge!!
I do wish i had dual on both. Right now my truck is a daily. The best i could give anyone, have a daily and an off road truck, never intermix the two lol. Or else you will be wondering how to go to work with a broken truck. Been there done that
Hello. I have a 1950 Farmall H Distillate ( it was made to run on kerosene ) it has the row crop front wide spread wheels, and a 1952 H gasoline only with the front narrow wheels and the factory hydraulic system in the transmission.
Great minds think a like! I love my '23 Zilla, yes, it's a Zilla. Check out Holley and their swap options for the Zilla. I do like my new front axle, as it behaves better than my '22. Research Dana and their tech on these new diffs. It seems as if they offer much better gear facing with a narrower ring gear. There seems to be 'method to their madness'. Great content! Thank You Sir!
I have a catch can in my summer car but I've heard a catch in colder weather is not a good idea. Apparently they can freeze up and block the flow. I have no idea if there's any truth to that tho. I'm assuming you haven't had any issues? And what is winter like in your area? Are you talking really cold like myself up North?
Totally unnecessary if not useless. Just adding more maintenance and failure points. For a boosted, DGI only engine you can make a case for one. For a relatively low compression, port injected NA motor, adding a catch can is a case of “if it ain’t broke, fix it until it breaks”
@@lefthandedfenceguy4924 awesome! Pilots licence has been a dream for me. Iv always wanted a stol bush plane. 4 seat, enough cargo cap for a hunting trip with 3 friends. So 4 packs, 4 guns, bedding and food/ potable water.
@@Sasquatchflow the problem is all engines have lifter issues right now. Chevy ford dodge and its all caused by the same thing, either the lifter spinning in the bore so the roller isnt straight or the roller locking up from dirty oil or lack of oil flow at idle or during mds on a dodge or cylinder deactivation on a gm truck. Best way to combat it is to change the oil at 5k and not idle the truck excessively. If i have a cam failure ill report it. But i do 5k oil changes and keep idle to a minimum. So i really dont expect to have an issue. More over with this recall to refresh the ecu with a high pressure oil calibration, my truck wasnt effected by the too little oil calibration. My bet is cali emissions trucks from that area are part of the issue. They lower oil pressure at idle to decrease fuel burned at idle
I find it hilarious that Ford guys for the last 30 years have absolutely trashed pushrod engines because Ford had abandoned them. The moment Ford announced the 7.3, they suddenly gushed over the idea of a pushrod V8 truck engine again. I think it's great that Ford admitted the error of their ways. Pushrod V8's are excellent for low end torque, fuel efficiency, and reliability. The issues that some guys have had with this engine, I believe, are due to excessive idle time -- lifters don't get as much lubrication when the engine is at warm idle. Don't let the engine sit there idling for 30+ minutes.
@@racook7534 its easy to be. They had 25 years of ls engine knowledge to work with and i love that it has a decent amount of displacement. Something the ls7 only got. I think they should have done a 427 truck engine
@@toddreeder3082 very exciting time. Im coming up on a year for my F450 but they build them much less frequently then a normal truck. I hear 3-4 months for non f450’s
Have a 20 year old ford truck, bought new $25k, has 120k miles on it now. Only major issue was the transmission, replaced twice. Then a few dozen batteries, brake pads thrice, rotors thrice, calipers (ceased lol), tires maybe two dozen sets, an alternator, struts, control arms, shocks, lots of misc parts. Still runs fine, i'll get 300k miles out of it, tranny gives me ptsd though, ford can't make them right to save their lives.
@@williamthigpen4480 a dozen batteries my bad, but nope rest was right, left out a lot of minor issues. Waterpump, fan clutch (bought an air hammer just for that),few belts, tensioner, compressor twice. Someone kept trying to open my door with a screwdriver, replaced lock few times, till I have up and used a counter sink. Tranny went at 30k, and then 70k, no issues since, save for some hard shifting now and then. The tires yup dunno why it just eats tires, replaced struts, control arms, tie rods few times and yes had an alignment didn't help, I never buy the expensive tires though, oh and it's an '06 4.6l
Reference your statement about the Chevy 8.1L being rated at a lower HP in the later years… The standard for rating HP changed around 2006ish. Typically the same engine that was rated the year prior, showed a 10hp less rating after.
I prefer simplicity over new modern comfort. The newest vehicle I have is a 2013 f150 5.0 regular cab. The other two is a 1986 bronco 351 and 1994 f350 7.3IDIT. My 13 only has cruise control and Bluetooth radio for fancy features. The other two trucks might not be as reliable as the 13 once I get them road worthy but should something break I can probably fix it on the side of the road unless it’s a massive failure. The 13 has computers and such that could fail and that’s not something I can really tackle away from home.
I have 3 trucks with the triton v10. The 2010 has 180,000 and still runs great. The 03 has over 200k and it currently is running like crap and we can't figure it out. It's going to Ford tomorrow. And the 99 has close to 200k and runs rough but we barely drive it. We just use it to hook up to a water trailer and we drive it maybe 100 miles a year. I want a f250 7.3 but these prices are ridiculous imo.
So apparently 2024 fixed all those issues I checked into it cuz I just bought the 2024 F-350 7.3 L Godzilla Lariat Tremor Edition in gunship grey and yes also do you live in Michigan Brandon Township and I'm buying mine from Randy Wise in Ortonville.... I ordered a week ago and I'm waiting for it to come in...... they told me August September I just got the VIN number today for it @@armytruth6860
In all honestly true i was actually thinking that when i was filming. Im sure some are evap lines. Ill have to trace them all now lol. Thanks for watching and commenting
Thank you! And ya i still dream of owning a 6.2 powered raptor someday. Cool truck, cool engine. But i think the superduty is better off with this new 7.3 for work duty. I think ford should have tried out the 6.2 and 7.3 in a car. I think they need a full size performance 2+2 and 4 door sedan. They need a Torino and galaxy. With truck engine power options and heavy duty rear axles and trans cooling. People like cruisers. Thats why charger and challenger sell like hot cakes!
Towing a 14k pound fifth wheel… my 6.0 did a great job. I need more payload capacity and don’t want a new diesel… strongly considering your exact truck.
I went from a 2006 gmc vortex maxx with 410 gears. Hauled around a 15000 pound fifth wheel for 10 years with it. I loved it and had no issues pulling but now I have 2022 f250 with 440 gears and the 7.3. Holy shit dude there is no comparison the two and my economy is just a tick lower on the average but a tick better under a load.
@@creaseejohn756 the 7.3 is no joke. Im an ls lover. We have had great luck with tuned 5.3’s and 6.0’s. But having so much more cubic inches if a 7.3 plus good heads makes for a great engine. I think its awesome to have such tolerable fuel economy and the power we get. I think the 7.3 is going to keep growing as a swap option. I know i can think of a few good applications for it
I hate all the plastic they put on engines now. I have a 15’ F350 with the 6.2. That had the plastic valve covers on it when I bought it. I took those off and put the aluminum valve covers on it instead.
Really trying to figure out what engine to get on our "forever" pickup. We are building out our homestead on 150 acres in the North West and will spend the rest of our lives there. We hope to never buy another truck. Assuming that price of fuel is not an issue (we are not price sensitive) but we are concerned that this is the end of the run for V8 engines and refuse to go hybrid or electric - thus we want to get it now. Should we get the diesel or the 7.3 Godzilla? Which is most likely to be running 15 years from now without major problems? We took note of Wranglerstar's 2001 Superduty with a V10 that seems to be running fine after all these years. which put us onto the idea of getting a "forever" pickup. What about the F150 as a forever truck? Is that too risky and too light duty?
Not really any such thing as forever lol, the f250 7.3 is nice and can haul just about anything you need, like a diesel without the weight. buuut the 10 speed tranny they have has had MAJOR issues, be prepared to drop at least $8k to replace it eventually. If you don't need 4x4 f150 not bad option either, differently cheaper to replace that transmission lol and Diesel oh diesel love to hate you, best have a diesel mechanic friend who works for beer or you'll go broke.
Only reason I keep it is because now I have 3 yr warranty on new engine unlimited miles 3 yrs Ford warranty Once 3 yrs done I am sale it and get older truck.
Good question perhaps because its a lower trim truck? My 2019 lariat ultimate had one. I havent really noticed it until you said it. The engine is very quiet but had a nice enough tone for stock exhaust. I wish i didnt value silence so much, it would already have an exhaust system.
@@Tom-ds5uk if i ordered another id do 4.30 mostly to see if im right that it would be better all around. 3.73 is so good its hard to complain. Every day i fight the urge to do what i always do and put mud tires on it of a larger diameter. For that id for sure want 4.30’s. For stock tires i honestly think 3.73’s are good.
the 7.3 is not like an LS. the deep skirt block, ford Y block. th3 canted valve heads, ford 335/385 series. fwd facing tb, mod motors. trans bolt pattern same as ford mod motor. cross bolted main caps, ford used them decades before the LS.
Great video!! I just picked up a ‘27 7.3 CCSB. Love the truck so far. Also, did you buy aftermarket or purchase the tremor steps? Also do you happen to have the part number for the front and rear mud flaps you have? Thanks!
I havent owned a 6.2. As far as i know they are very reliable. I know they suffer from small displacement. I think they are 376 inches. Liters with one decimal places covers 4-5 cubic inches so its not as exact as it could be. Anyway they dont make alot of torque below 4000 rpm. Where the 7.3 makes boat loads of torque below 4k rpm and frankly you can drive this engine from idle to 2000 rpm as a norm even when towing. So i think the 6.2 has alot of merit. It will get the job done but there is no doubt in my mind 7.3 both out tows it and out runs it. Ford did a good job spec wise with this engine. They gave it what it needed to perform well. I dont believe there is a production gas engine that will out tow it. And its a good daily driver engine too. It feels about as peppy as one would want/expect.
Does yours have the Dana 60 front end with the manual locking hubs on both sides ? Bc supposedly all the new ones have a smaller front axle now with only the drivers side locking hub. What’s your thoughts on this ?
23’+ f250/350 superduty’s all come with the M235 front axle not the larger M256 (Dana 60). The only trucks with locking hubs on BOTH sides have the Tremor package with the front LSD. Every other truck has a blank hub on the passenger side that is even inscribed “do not turn”. If you don’t want your front axle shaft turning you need to order a hub for passenger side and connect the vacuum line with a ~6” piece of vacuum hose.
Those are factory ford tremor side steps. I actually have a video on installing them. But they go on any 2020+ 4 door superduty. Im not sure if they changed the step location, i bet not. They could fit on older body style superduties too
All trucks are way over priced by greedy scum company’s. For the money they want all trucks should be completely high quality stainless steel and have lifetime bumper to bumper to original owner. Anything less is a complete scam.
Direct injection is a no go from me. Lots of added complexity and cost to just have to deal with carbon fowling. Lifter failures are mostly relegated to cab and chassis trucks with high idle hours.
The guy with the older truck will get there slower, rougher, and not as cool but you guys in your new trucks will pay $100k including interest just not worth it to me
@@phat-kw9ox not that you arent wrong but my truck was 58700 out the door. I financed 22k. And will pay 5400 bucks of interest at the maturity if the loan if i pay it fully and dont pay extra. Sure you buy a platnum put none down and have a high interest loan its going to be very expensive. I have enough bad habits on working on old trucks i dont want my daily to require the same amount of service and attention.
After owning 2002,2002,2008,2011,2016,2019 Superduty F350's diesels and now 2024 7.3 F350 I must say it's a great truck. Got 10k on it too. Flawless as well. Will be taking it across country this coming summer with truck camper. Wish me well.
Have a great trip, be sure to stop and enjoy all there is to do. Most of my road trips for work end up being there and back as fast as i can and i know im missing out on so much.
There is a steam train museum iv driven last on the way to Philadelphia now 3 times i havent stopped.
How’s your mileage not towing or towing? Thanks
These 7.3s are going to be amazing when they get all the bugs 100% worked out. The lifter issues still have me apprehensive of the 7.3 Godzilla at this point. Would make a great option for most who aren't towing daily but have a large RV or equipment to move and don't want to deal with new diesels emissions (can't make them disappear easily in many states). The 7.3 has been swapped into a 1965 Shelby A/C cobra and it's insane!
Ill report if mine has a cam failure. So far so good.
This engine in a light car would be so much fun. I mentioned id like to have a police pursuit crown vic with one and im not kidding.
@@greatlakespowerstrokefx4I gave my son my 2011 vic police interceptor many years ago and he's selling it now. It's in decent shape but not perfect.
I'd like to grab one of these also but as you mentioned there is reports of lifter/cam issues. Here's what I get from that. It's a very small percentage of trucks that run into that issue. They say it's more so the rv's and box trucks that have that issue. Idling for long periods was all mentioned as they don't get enough oil pressure. I also heard it's mainly the trucks that were built in the covid era as the supply chain was messed up and Ford had to source parts from different manufacturers. I was actually at a local Ford super duty shop today and I spoke to the service manager about that issue. He claims he has never had a f250 come through the doors with those issues. Now the 10 speed transmission issue some people are having is a different story. I think a lot of that has to do with the tuning. And apparently in 24 Ford changed some stuff in the transmission so maybe it's resolved now. Ford sure does have tyranny issues tho. I have a mt82 in my Mustang. So far it's been good to me but it gets a lot hate. Same thing with the 10r80 that are in those cars. Once people start putting more power to the ground they start having issues.
@@lobbyrobby your info sounds spot on from my understanding. I had a mt82 in a mustang as well, a 2014 track pack. Good car and the trans was fine for everything but speed shifting. I even had a ford racing short throw shifted. You had to be very careful crossing the gate because the trans rocked when you shifted and the distance to the next gear would change.
I should have kept that car it was a fun daily
@@greatlakespowerstrokefx4 I have a mgw that's not installed yet and a braided clutch line. People swear an aftermarket clutch really helps with 3rd gear lockout. I don't want to go that far yet. My car is boosted but I'm only at 600whp because of shitty 91 octane. And yes, I said only lol. The supercharger kit is capable of much more. In all honesty tho 600 whp is perfect for a fun street car. When it's cold out the car really struggles for traction anyway and I have zero desire to run a drag pack.
I ordered your exact truck but a 22 model. Coming from diesel trucks I have not regrets. I really like it.
I’ve had my 23’ Tremor for 60 days. Absolutely love driving it. Nice video. You know your stuff bud.
Was your 7.3 special order or are they sitting on lot in tremor package?
I'm currently driving a 2018 F205 Diesel for personal use and I love the low end torque. No need to floor it to feel the speed and power. I also drive a 2019 F250 6.2 gasser and it just doesn't have any low end torque. So it's a little slow and not too fun to drive, I mean you have to floor it to feel some power. That being said, do you think the 7.3 Godzilla is a fun engine to drive like a diesel? I know it won't pull like a diesel but I'm wondering if it's fun for normal in the city driving like a diesel.
Bro I came from an 05 silvwrado into my 22 7.3 and literally I said to myself one day "holy crap this is a modern reincarnation of the GMT800 platform"
Spot on on your analysis.
Yes I have a 2022 Lariat 150 with the baby 6 and I can hear a pin drop maybe when it’s running. It has the sound mat so I checked this morning. I don’t have a reason for the big ones anymore but I live vicariously through you. Great Video Thank You 🙏
I try to keep my truck busy but it is great at delivering pizzas too lol
Great video; I appreciate your knowledge; I learned a lot. I have the 6.8 in a 23F350 CC XL STX and love it so far. Lots of power for me but my first super duty.
The 6.8 sounds like a good option. Eventually the aftermarket is going to love boosting them. The shorter stroke means less piston speed so less load on the rotating assembly. I wonder of the heads are the same as the 7.3. 415 ci is still a very reasonable amount of displacement to work with.
Id like to drive one
I have a 2020 6.2 and just picked a 2024 7.3. The 7.3 has good torque. Love it so far.
How is your mileage?
Man, you know a lot about trucks and vehicles. I'd like to buy you lunch one day, if you're ever over this way.
Me: 23f250, Lariat LB, 7.3, 373e, 2alt, 2batt, etc.etc.
Thanks for sharing your knowledge!!
I do wish i had dual on both. Right now my truck is a daily. The best i could give anyone, have a daily and an off road truck, never intermix the two lol. Or else you will be wondering how to go to work with a broken truck. Been there done that
@@greatlakespowerstrokefx4 Agree 100%. Daily drive a Ram Cummins 2500 and off-road toy is a Jeep TJ.
Hello. I have a 1950 Farmall H Distillate ( it was made to run on kerosene ) it has the row crop front wide spread wheels, and a 1952 H gasoline only with the front narrow wheels and the factory hydraulic system in the transmission.
Great minds think a like! I love my '23 Zilla, yes, it's a Zilla. Check out Holley and their swap options for the Zilla. I do like my new front axle, as it behaves better than my '22. Research Dana and their tech on these new diffs. It seems as if they offer much better gear facing with a narrower ring gear. There seems to be 'method to their madness'. Great content! Thank You Sir!
EVERY modern vehicle should have a 100k powertrain warranty. Absurd that MFGs are saying a lot by not offering it.
That'd put ford out of business lol
I want 6.7 Tremor for offroad and just being a plain beast! And I don't even have anything to tow !!😂😂😂
I love my 7.3, been great for me. I did out in a catch can. It collects a lot especially in the winter months
I have a catch can in my summer car but I've heard a catch in colder weather is not a good idea. Apparently they can freeze up and block the flow. I have no idea if there's any truth to that tho. I'm assuming you haven't had any issues? And what is winter like in your area? Are you talking really cold like myself up North?
Totally unnecessary if not useless. Just adding more maintenance and failure points. For a boosted, DGI only engine you can make a case for one. For a relatively low compression, port injected NA motor, adding a catch can is a case of “if it ain’t broke, fix it until it breaks”
The 7.3 is an awesome HD engine.
My pickup has the 7.3...My airplane has a Lycoming 0-320...I'm pleased with both of em.
@@lefthandedfenceguy4924 awesome! Pilots licence has been a dream for me. Iv always wanted a stol bush plane. 4 seat, enough cargo cap for a hunting trip with 3 friends. So 4 packs, 4 guns, bedding and food/ potable water.
Amen about the 100k warranty! Great video.
Thanks for the update, glad to hear the good info on the 7.3l!
Ya lifter issues are a major concern for me but I’d love to get one when they get that figured out.
@@Sasquatchflow the problem is all engines have lifter issues right now. Chevy ford dodge and its all caused by the same thing, either the lifter spinning in the bore so the roller isnt straight or the roller locking up from dirty oil or lack of oil flow at idle or during mds on a dodge or cylinder deactivation on a gm truck.
Best way to combat it is to change the oil at 5k and not idle the truck excessively.
If i have a cam failure ill report it. But i do 5k oil changes and keep idle to a minimum. So i really dont expect to have an issue. More over with this recall to refresh the ecu with a high pressure oil calibration, my truck wasnt effected by the too little oil calibration. My bet is cali emissions trucks from that area are part of the issue. They lower oil pressure at idle to decrease fuel burned at idle
I find it hilarious that Ford guys for the last 30 years have absolutely trashed pushrod engines because Ford had abandoned them. The moment Ford announced the 7.3, they suddenly gushed over the idea of a pushrod V8 truck engine again. I think it's great that Ford admitted the error of their ways. Pushrod V8's are excellent for low end torque, fuel efficiency, and reliability. The issues that some guys have had with this engine, I believe, are due to excessive idle time -- lifters don't get as much lubrication when the engine is at warm idle. Don't let the engine sit there idling for 30+ minutes.
Traditionally a chevy guy, I am infinitely curios of the 7.3.
@@racook7534 its easy to be. They had 25 years of ls engine knowledge to work with and i love that it has a decent amount of displacement. Something the ls7 only got. I think they should have done a 427 truck engine
I just went to my local Ford Dealership and put my order in I can't wait lol😅
@@toddreeder3082 very exciting time. Im coming up on a year for my F450 but they build them much less frequently then a normal truck. I hear 3-4 months for non f450’s
Have a 20 year old ford truck, bought new $25k, has 120k miles on it now. Only major issue was the transmission, replaced twice. Then a few dozen batteries, brake pads thrice, rotors thrice, calipers (ceased lol), tires maybe two dozen sets, an alternator, struts, control arms, shocks, lots of misc parts. Still runs fine, i'll get 300k miles out of it, tranny gives me ptsd though, ford can't make them right to save their lives.
No way you had these issues with a 2004 ford truck. 24 batteries , 2 transmissions ,24 sets of tires That’s bullshit
@@williamthigpen4480 a dozen batteries my bad, but nope rest was right, left out a lot of minor issues. Waterpump, fan clutch (bought an air hammer just for that),few belts, tensioner, compressor twice. Someone kept trying to open my door with a screwdriver, replaced lock few times, till I have up and used a counter sink. Tranny went at 30k, and then 70k, no issues since, save for some hard shifting now and then. The tires yup dunno why it just eats tires, replaced struts, control arms, tie rods few times and yes had an alignment didn't help, I never buy the expensive tires though, oh and it's an '06 4.6l
Reference your statement about the Chevy 8.1L being rated at a lower HP in the later years… The standard for rating HP changed around 2006ish. Typically the same engine that was rated the year prior, showed a 10hp less rating after.
I prefer simplicity over new modern comfort. The newest vehicle I have is a 2013 f150 5.0 regular cab. The other two is a 1986 bronco 351 and 1994 f350 7.3IDIT. My 13 only has cruise control and Bluetooth radio for fancy features. The other two trucks might not be as reliable as the 13 once I get them road worthy but should something break I can probably fix it on the side of the road unless it’s a massive failure. The 13 has computers and such that could fail and that’s not something I can really tackle away from home.
id love to see what a 24 6.8 on E85 can do
Wow looks amazing
Howard city Michigan here
I have 3 trucks with the triton v10. The 2010 has 180,000 and still runs great. The 03 has over 200k and it currently is running like crap and we can't figure it out. It's going to Ford tomorrow. And the 99 has close to 200k and runs rough but we barely drive it. We just use it to hook up to a water trailer and we drive it maybe 100 miles a year. I want a f250 7.3 but these prices are ridiculous imo.
Don't be to in love!
My 2021 F250 7.3 failed 67k miles
Cylinder 2 misfire and blow the engine. Out of warranty 10k replacement 😢
Why didn't you get an extended warranty earlier
So apparently 2024 fixed all those issues I checked into it cuz I just bought the 2024 F-350 7.3 L Godzilla Lariat Tremor Edition in gunship grey and yes also do you live in Michigan Brandon Township and I'm buying mine from Randy Wise in Ortonville.... I ordered a week ago and I'm waiting for it to come in...... they told me August September I just got the VIN number today for it @@armytruth6860
Ford got a little busy with the vacuum hoses….looks like an 80s Honda with carburetored engine 😅
In all honestly true i was actually thinking that when i was filming. Im sure some are evap lines. Ill have to trace them all now lol. Thanks for watching and commenting
Great video duder 👍🏻🤘🏻
@@snowman440 thanks snowman! Love your handle. 440 cat?
Beautiful truck
6.2 was damn near bulletproof. They better figure out the metal internal parts. Nice truck sir.
Thank you! And ya i still dream of owning a 6.2 powered raptor someday. Cool truck, cool engine. But i think the superduty is better off with this new 7.3 for work duty.
I think ford should have tried out the 6.2 and 7.3 in a car. I think they need a full size performance 2+2 and 4 door sedan.
They need a Torino and galaxy. With truck engine power options and heavy duty rear axles and trans cooling.
People like cruisers. Thats why charger and challenger sell like hot cakes!
Missing a Whipple and it would be perfect x)
Totally agree. Would be a hilariously fun truck. And a carli dominator kit and 40’s and 5.13’s
Towing a 14k pound fifth wheel… my 6.0 did a great job. I need more payload capacity and don’t want a new diesel… strongly considering your exact truck.
Mine is 4381 lbs of payload. Pretty hard to argue with a single wheel with that much. I hear the camper package puts it up to 4600
I went from a 2006 gmc vortex maxx with 410 gears. Hauled around a 15000 pound fifth wheel for 10 years with it. I loved it and had no issues pulling but now I have 2022 f250 with 440 gears and the 7.3. Holy shit dude there is no comparison the two and my economy is just a tick lower on the average but a tick better under a load.
@@creaseejohn756 the 7.3 is no joke. Im an ls lover. We have had great luck with tuned 5.3’s and 6.0’s. But having so much more cubic inches if a 7.3 plus good heads makes for a great engine. I think its awesome to have such tolerable fuel economy and the power we get. I think the 7.3 is going to keep growing as a swap option. I know i can think of a few good applications for it
I hate all the plastic they put on engines now. I have a 15’ F350 with the 6.2. That had the plastic valve covers on it when I bought it. I took those off and put the aluminum valve covers on it instead.
Saves weight and plastic doesnt hold heat like aluminum. I think they also help with sound deadening with overhead cams
Great info!
@@PurpleCollarLife thank you so much!
What part of Michigan?
Sharp truck!
Love the video
Really trying to figure out what engine to get on our "forever" pickup. We are building out our homestead on 150 acres in the North West and will spend the rest of our lives there. We hope to never buy another truck. Assuming that price of fuel is not an issue (we are not price sensitive) but we are concerned that this is the end of the run for V8 engines and refuse to go hybrid or electric - thus we want to get it now. Should we get the diesel or the 7.3 Godzilla? Which is most likely to be running 15 years from now without major problems? We took note of Wranglerstar's 2001 Superduty with a V10 that seems to be running fine after all these years. which put us onto the idea of getting a "forever" pickup. What about the F150 as a forever truck? Is that too risky and too light duty?
Not really any such thing as forever lol, the f250 7.3 is nice and can haul just about anything you need, like a diesel without the weight. buuut the 10 speed tranny they have has had MAJOR issues, be prepared to drop at least $8k to replace it eventually. If you don't need 4x4 f150 not bad option either, differently cheaper to replace that transmission lol and Diesel oh diesel love to hate you, best have a diesel mechanic friend who works for beer or you'll go broke.
Only reason I keep it is because now I have 3 yr warranty on new engine unlimited miles 3 yrs Ford warranty
Once 3 yrs done I am sale it and get older truck.
I do like big engine 7.3 gas 👍
Heck yeah LOVE your attitude.
Hi I’m new to the channel. Why didn’t Ford put a hood insulator in your truck. It would definitely make things quieter.
Good question perhaps because its a lower trim truck? My 2019 lariat ultimate had one. I havent really noticed it until you said it. The engine is very quiet but had a nice enough tone for stock exhaust. I wish i didnt value silence so much, it would already have an exhaust system.
What gear ratio would you pick in retrospect ?
@@Tom-ds5uk if i ordered another id do 4.30 mostly to see if im right that it would be better all around. 3.73 is so good its hard to complain.
Every day i fight the urge to do what i always do and put mud tires on it of a larger diameter. For that id for sure want 4.30’s. For stock tires i honestly think 3.73’s are good.
the 7.3 is not like an LS. the deep skirt block, ford Y block. th3 canted valve heads, ford 335/385 series. fwd facing tb, mod motors. trans bolt pattern same as ford mod motor. cross bolted main caps, ford used them decades before the LS.
Great video!! I just picked up a ‘27 7.3 CCSB. Love the truck so far. Also, did you buy aftermarket or purchase the tremor steps? Also do you happen to have the part number for the front and rear mud flaps you have? Thanks!
How do you think this compares to the 6.2?
I havent owned a 6.2. As far as i know they are very reliable. I know they suffer from small displacement. I think they are 376 inches. Liters with one decimal places covers 4-5 cubic inches so its not as exact as it could be. Anyway they dont make alot of torque below 4000 rpm. Where the 7.3 makes boat loads of torque below 4k rpm and frankly you can drive this engine from idle to 2000 rpm as a norm even when towing.
So i think the 6.2 has alot of merit. It will get the job done but there is no doubt in my mind 7.3 both out tows it and out runs it.
Ford did a good job spec wise with this engine. They gave it what it needed to perform well. I dont believe there is a production gas engine that will out tow it. And its a good daily driver engine too. It feels about as peppy as one would want/expect.
Do you think it needs a catch can?
Need no, but my 2020 has one and it's got nasty crap in it every oil change. Dump it out and back at it.
Does yours have the Dana 60 front end with the manual locking hubs on both sides ? Bc supposedly all the new ones have a smaller front axle now with only the drivers side locking hub. What’s your thoughts on this ?
My 2023 has lockers on both sides
My 24 is one side
My 23 F350 has manual locking on both sides. Does this mean I have a Dana 60? I have a sterling in the rear.
23’+ f250/350 superduty’s all come with the M235 front axle not the larger M256 (Dana 60). The only trucks with locking hubs on BOTH sides have the Tremor package with the front LSD. Every other truck has a blank hub on the passenger side that is even inscribed “do not turn”. If you don’t want your front axle shaft turning you need to order a hub for passenger side and connect the vacuum line with a ~6” piece of vacuum hose.
@@Shadydiesel the 23s still have turning hubs on both sides. That change was made for 24
Where did you get those side steps?
Those are factory ford tremor side steps. I actually have a video on installing them. But they go on any 2020+ 4 door superduty. Im not sure if they changed the step location, i bet not. They could fit on older body style superduties too
My 22 F 450 7.3 gas engine
Transmission failed @ 85 k
Lifter failure @ 115k
The cab and chassis is the most likely set up for the lifter failure. Why they thought limiting oil flow at idle i dont know
All trucks are way over priced by greedy scum company’s. For the money they want all trucks should be completely high quality stainless steel and have lifetime bumper to bumper to original owner. Anything less is a complete scam.
Prone to valve train failure
Only thing about the 7.3 is the lifters. If they holdup you got a great truck otherwise in my opinion the gas Chevy HDs are the best
Direct injection is a no go from me. Lots of added complexity and cost to just have to deal with carbon fowling. Lifter failures are mostly relegated to cab and chassis trucks with high idle hours.
@@greatlakespowerstrokefx4 I have never heard of DI problems in the 6.6 gas, and some examples have reached high mileage.
@3:30 6 Bolt main? That looks like a 4 bolt main.
4 holding down 2 cross bolts
Godzirra lun for yoll rife ahhh 😱
The Skyline GTR is a piece of garbage that isn’t worth towing.
@@jorge_s052 i dont think id want to tow with one either. But they are pretty good at what they were built for
What a waste this was. Can skip. Spends most of video talking about other vehicles and not the one in the title.
A gas 7.3 what a disgrace
O its no disgrace. The powerstroke would be truck lengths behind it load for load lol
The guy with the older truck will get there slower, rougher, and not as cool but you guys in your new trucks will pay $100k including interest just not worth it to me
@@phat-kw9ox not that you arent wrong but my truck was 58700 out the door. I financed 22k. And will pay 5400 bucks of interest at the maturity if the loan if i pay it fully and dont pay extra. Sure you buy a platnum put none down and have a high interest loan its going to be very expensive.
I have enough bad habits on working on old trucks i dont want my daily to require the same amount of service and attention.
I'll stick with my 6.7