How to install Google Nest Protect (Wired 120V and Battery)
Vložit
- čas přidán 26. 07. 2019
- INSTALLATION AND SYNCHING OF 6 NEST PROTECTS
Nest Protect Product Link: amzn.to/2Wtpnhh
Please comment and subscribe below to help support my channel :) - Jak na to + styl
Tip: Take a picture of the bar code on the back the detector. If you change your wifi name/password you will need to remove and re-add the nest detector. Easier to pull up a picture than to pull out the ladder X times.
FYI: Nest has since updated this process (finally) for all gen 2’s to be able to do this wirelessly now through a software update!
I really liked how you showed your phone display on the side while adding the sensors; well done!
12:24 actual installation
Thank youu
Great video! I bet I can do this myself with the help of your video! Thanks!!
D.E. Drost
Great video! Very informative.
Thanks!!
Great video! Can more than 1 phone be connected for alerts, say for renter/home owner or Husband/wife that travel independently? Do the alarms still work/go off if WiFi or cell service stops working? Thanks!
great video and very helpful
Nice videos on the nest protect, do you think this cleaning will clear the “CO2 Sensor Failure” on my Protect? It’s only 2 years old…
Great video. Thanks for the info. I'm getting ready to install 8 Nest units in a new home that doesn't yet have wifi. But the Nests need to be installed so we can get the Certificate of Occupancy. Can I set up (program) the Nests in my rental (where I have wifi) and then bring them to my new home and get them installed there? Will I have to redo anything once my new home has wifi? Many thanks.
Great video, used it as a refresher when I installed all 9 of my gen 2 wired ones. What have I learned so far, Nest protect does not like to be anywhere close to a bathroom with shower. Even with the steam feature enabled, when my daughters get out of the bathroom with the fan on, it still goes off every time.
I did notice the firmware is from 2021 on my units but for some reason they won't update. If I can't get this fixed, I guess disable 1 out of 9. Kind of defeats the purpose but what are you going to do?
Very good video, funny and informative, Thanks!!
Robert Thrailkill subscribe to my CZcams channel it amir the repair guy I make video of technology and like the video
About 2-1/2 years after initial installation, one of my Nest Protect units started to chirp and I got a low battery waring in my Nest app. I went to change the original factory-supplied L91 batteries in this unit (one of my THREE Protect products) and one of the batteries was VERY hot. The other 5 were normal temperature. I had to put the hot battery outside to let it cool off before discarding.
I'm now worried about my other Protect products and will take them out of service today. I see on the forums hundreds of others had similar issues. Ever hear of or experience this yourself?
Great info on this,quick question, do I need to have any nest products or I can just buy the detectors and use them just out of the box? I asked since I don't have a nest thermostat or cameras.
Thank you.
@@BrightHouseEnergy thanks.
Do you have to change all of the detectors?
Rather than apply sticky notes, each Protect has an area on the back you can label Installation Date and Location
Does anyone know if Google is abandoning the Nest products? I bought a 2nd generation Nest Protect (wired) and it is not supported by Google Home or the newest Google Hubs with video.
other manufacture smoke like kidde or Brk can be interconnect with nest co smoke alrm ?
No, unfortunately. If Google ever makes a 3rd gen Protect, it'd be nice to have an interconnect wire, even if it's optional.
893 person to like
what are the difference between battery and wire , are they offering the same futures?
First of all great video and informative. Is this will work with other wired devises like Kidde? Thx in advance.
Yep, he's correct, they do not communicate with other types of detectors
We have to replace an alarm in California and it we replaced it with different alarm but there was already a nest protect
great video sir. we were planning to install this on a resort with 100 rooms. can a single app supports 100 nest protect device?
The nest app supports 18 devices per home.
You can have 3 homes (18*3 = 54 devices) with a nest based sign in.
A google sign in will let you create 5 homes (18*5 = 90).
I believe your only option is to sign up through google these days, so the answer to your question is 90.
You can also create another google account with a different email address allowing you to add the remaining 10.
You could possibly relate the different areas of the resort to the “homes” you create in the app.
I cannot get my nest protect device to recognize my Wi-Fi or my nest-#### Wi-Fi
I don’t know if It is working. My Nest thermostat and camera shows in nest App and Google home! But not protect after many attempts
I got my first one to connect to the network on the 2nd try. The other 2 units would NOT connect (All wired units). I've tried about 40 times each so far.. I tried all the typical troubleshooting but no success yet. I wonder if once the first one is connected, disable it so the second unit THINKS its the first unit. Thats the only thing I can think of at this point. But on your video, one unit connects to the previous unit.
The new system would also give consumers more control about what their money 💰 will do for the economy if their savings rate goes below ⬇️ their limit or they can be cut
I don't know why, but my Nest setup did NOT have an option for it to say "basement." The only option that was close to it was "Cellar," so I was forced to choose that. Any idea why??
@@BrightHouseEnergy LOL. Ok, I'll do that.
I like nest protect
Can I have the old ones?
Are these smoke detectors available?
2 beeps = end of life
Any idea what to do when you move out, and your wifi is disconnected?
How do you transfer the ownership to the new renter?
You’ll have to reset each device to transfer ownership by pressing and holding the face button until it asks you to release.
@@BrightHouseEnergy Wow! Thanks for the quick reply. :)
If it was old your smoke alarm or carbon monoxide alarm may ring
That smoke detector is recalled bring it back to Kitty right now it’s Dunaj they will give you a new one or go to the fire department
If one fire alarm goes off, do all the others all at the same time?
Yes they do!
You forgot to test!
Edit 1
0:59 1:14 Smoke detector Fell down
3
any other videos you do... more belt funniez lolzzzzz
Justin Montague Ha! I had fun making that one. I almost done with a mini split install that has some dog antics included. Stay tuned :) thanks for the sub!
1st
Kul sang i starten
When all your old detectors were chirping like why did they have problems. I have first alert and the one in my room is so chirpy and old, its old to the point where the sound was blown
Hi
Do they need batteries?
Kennard Edmund they come with lithium ion AA batteries in the device used as a backup power source if the electricity goes out.
Nicholas Broussard so they are like pluged in the hoise outlet like that?
Because i was planing to have that
hardwired wires they used to power up all the smoke alarms if the power goes out then the fire alarm batteries will be battery back up so they will be still working in case of a smoke or fire in the house and this will still work while battery operated
Subscribe to my channel it Amir the repair guy I make video of technology
Drop the cornball act.
If your Wifi signal dies and there is a fire in your garage 50' away from your house will the other nest detectors in the house chirp? If so what technology is used to do this?
Phone is your phone and phone
& is ba
Good of just replaced the battery
Stopped watching when I saw the dramatization. Don’t need the drama part just the instructions.