Luis, você poderia ajudar a Karina Ingrid no outro comentário desse vídeo? Ela perguntou qual o próximo passo depois da validação do diploma e como foi a procura de emprego depois. No caso do meu amigo ele fez um mestrado, o que ajudou bastante.
Thanks for sharing this information buddy! I am a Civil engineer who has just arrived to Florida 1 month ago and I am working with a status of under-degree since I am working on the area of project management in construction. I would love to develop my career as a structural engineer as I was doing in Mexico before my arrival. This video was helpful!
Obrigado pelas informações Eugenio. Alguem pode dizer como e o exame? Sou formado engenharia mecanica, mas trabalho na aviacao na area tecnica operacional. Gostaria de tentar validar a engenharia
Excellent video!!! Very informative!!! I'm looking forward to validate my electrical engineering diploma. In Florida, after having the equivalence arrested by NCEES, what's the next step? Do the Fundamentals of Engineering exam and registering on the Board of Engineers?
Você sabe me informar se tudo tem que ser original quando enviado pra NCEES? A NCEES tem um tradutor oficial? Tenho que traduzir as ementas todas ou eu brevemente posso fazer uma descrição de cada disciplina? Um vídeo explicando isso seria de grande ajuda. Obrigado!
Creio que a cópia traduzida e juramentada é suficiente pra NCEES. Se vc olhar no site da NCEES, acho que eles tem um exemplo das descrições de curso. Creio que são só descrições breves e não a ementa completa. Valeu pelo comentário e boa sorte!
thanks brother for this helpful info, i only have my bachelor diploma in hand in U.S. can i evaluate it or no should have my transcript too to be evaluated? thanks for your answer in advance🙏
I believe most certified translation companies would be acceptable, but if you want to be sure, you can always contact NCEES to double check or your state board. For Florida, for example, they list another agency that can do the credentials evaluation (see links below). That agency may also do translation. Hope this helps! fbpe.org/licensure/licensure-process/
Olá! Muito obrigado pelas dicas e informações! Acabei de passar pelo evaluation e estou missing 6 hours em General Education. Baseado nisso, qual seria o próximo passo que eu deveria dar? Obrigado desde ja.
De nada Alisson! Eu creio que você só tem que pegar matérias aqui nos EUA que completem essas 6 horas e depois enviar o histórico ou algum tipo de comprovante pro NCEES ou o órgão através do qual você esteja fazendo o processo. Antes de se matricular nas matérias, eu recomendaria você entrar em contato com o órgão pra ter certeza que eles vão aceitar as horas e confirmar o processo de validação. Obrigado por acompanhar o vídeo!
Thanks for this wonderful video my question is that my credential evaluations meets ncees standards. is this means my degree is validated or is there additional steps required to validate? and i want to apply with Virginia state Board thank you in advance.
Hi there, it depends on the state board. Most of the time, this is all the board needs. However, I’d contact the Virginia board and ask them if they need anything else.
Thank you so much, im civil engineer from Peru, my university is been acredditaded by Abet, do i need to send the course descripcions ? Or do i need to pass the credential evacuation?
Hello bro, my credentials already evaluated and already have an unofficial report. I have this option now of sending this unofficial report to a specific board. I will be migrating to Chicago,Illinois sooner and they have this three boards in Illinois. Illinois PE, Illinois LS and Illinois SE. What should I choose? Thanks.
Congrats on getting the credentials evaluation completed Renz! It depends on what license you’re pursuing. If you are going to apply for a PE license or try to take the PE exam, you’d contact the PE board. I would send them an email or give them a call before sending the documents to confirm they are the right option for your needs and the next steps.
Hi Raza, thanks for watching. It really depends on your goals in the US. But I would say definitely getting both evaluated once and for all will maximize your chances in the job market. I hope it goes well for you!
I submitted my educational certificates with NCEES and it says that your institute have to mail the degree to us for evaluation but my institute in Pakistan told that they only email documents to the body as per the policy .what should i do in this case ? Thank you
You can try having someone (a friend or relative perhaps) get the hard copies from the school in Pakistan and mail the documents on the school’s behalf and see if NCEES accepts it. As long as the school is fine with it, there’s a good chance NCEES will accept it.
Primeiramente, parabéns pelo vídeo. Entretanto tenho uma dúvida. No que tange a profissão de Engenheiro nos EUA, todo e qualquer profissional deve se tornar membro de um board, ou esse vínculo é aplicável apenas para alguns casos (ex. prestadores de serviço)? Fazendo um paralelo com o Brasil, sendo você funcionário de uma empresa ou um prestador de serviços, é necessário que haja o vínculo com o CREA. No caso dos Estados Unidos, isso não ficou claro. Assistindo à alguns vídeos, notei que à adesão ao board é muito mais comum a Engenheiros Civis, creio que para poderem assinar projetos como prestador de serviço. É isso mesmo ou minha interpretação está errada? Posso deixar de ser membro de um board e ainda assim exercer a função de engenheiro mecânico como funcionário de uma empresa nos EUA? Obrigado!
Muito obrigado Agostinho! Tem muitos profissionais que não são membros de um state board, mas eles não podem assinar projetos. Nesse caso, eles trabalham em uma empresa com outros profissionais que podem assinar. Na engenharia mecânica é mais flexível ainda, no sentido de que tem mais profissionais sem afiliações a um board (licença PE por exemplo), porque licenças não são tão requeridas como nos ramos da engenharia civil.
Olá! Muito obrigada pelas informações! Depois de ter recebido a responda da NCEES, qual foi o próximo passo? Se preparar para o FE? Com isso o seu amigo estava hábil a trabalhar? Ele teve dificuldade em encontrar emprego tendo o degree de uma foreign country?
Olá Karina! Meu amigo se formou no Brasil, mas começou um mestrado aqui. Depois de validar o diploma pelo NCEES o próximo passo seria estudar para o FE. Eu recomendaria ver no site se tem como vc se inscrever e fazer a prova antes de validar o diploma porque talvez o processo de validação do diploma é necessário somente pra obter a licença. Meu amigo estava hábil a trabalhar por que ele aplicou para uma autorização de trabalho chamada OPT depois do mestrado. Ele não teve tanta dificuldade para encontrar emprego porque o mestrado ajudou bastante. O Luis Nunes, no outro comentário desse vídeo parece ter passado por uma experiência semelhante. Vou perguntar se ele pode responder nesse comentário. Obrigado pelo suporte!
@@QuickQuestionEngineering eu não entendi muito bem sobre fazer a prova antes de fazer a traducao dos documentos. Eu fiz quase todo processo de tradução. Falta somente a tradução da ementa daí eu estaria aplicando para fazer a prova. Então você dizendo que talvez não há necessidade de traduzir e somente fazer a prova ?
@@marceloricardo3668 Há sim a necessidade de fazer a tradução. O que eu quis dizer no meu comentário anterior foi que talvez você consiga fazer a prova antes de terminar o processo da tradução (se o NCEES permitir isso), mas você só vai conseguir a licença EIT (Engineer in Training) depois que você tiver passado na prova e terminado o processo da validação do diploma. No seu caso, parece ser melhor terminar o processo da tradução antes de tentar se inscrever pra prova já que falta pouco pra você concluir o processo da tradução. Valeu por acompanhar os vídeos!
Thank you for the video. So I did the evaluation and the outcome was unequivalent (missing 6 credit hours in general education) so what's next? any help is much appreciated
Tahreer, I would contact the board you applied to and ask what they require. They may require that you take those courses in an accredited university to finish the validation of your diploma. Thanks for watching and hope you get to the finish line on this!
Hi Blue Beret, no you don’t. I would double check with your specific board, but I have international friends (non-residents) who took their FE exams for example. Thanks for watching!
I’m in the process to send my document, but I’m got confused because I don’t know if my university need to send my document or I need to send my document personally
That’s an important step. I think the university has to send it (per NCEES guidelines), but sometimes universities don’t do that service. If that’s the case, you may be able to send it on behalf of the university, with their authorization.
@@leonelvasquez4687go to your university and take all the documents and go the certified translator to translate them for you and after go to the university and tell them to put the documents in an envelope and seal them after you can send them to NCEES on behalf of the university, don’t send them on your behalf and without they’re sealed by the university
That’s a great question! I am not sure if there would be separate fees for that or if they would do both for the same price. I would contact NCEES and/or your state board because I didn’t see this explicitly explained on the NCEES’ website.
@@QuickQuestionEngineering I have one more question, as an international degree holder, do you have to be a US resident to be able to register with your specific state board?
Hello, I am a Petroleum Engineer graduated from Ecuador. Today, I started the credentials evaluation process with the NCEES, hopefully I won't need to take courses to meet the US standards. Anyways, my question is, in the case that I meet all the requirements with my credential's evaluation, what is the next step after this?
Hi Luis, congrats on starting the evaluation process. I think emailing the state board asking what the next step is would be a great starting point because every state has different regulations. Thanks for watching!
@@QuickQuestionEngineering Thank you. Today, I received the news that I have met the requirements and I sent an email to the board for the next step. Thank you for your advise.
@@paraluisao76 Depending in what state are you planning to take the FE you will need to ask the board of that state for permission to take the FE. In my case, I requested that to the board of New York and they responded to my request two or three weeks after stating that I was allowed to have a seat for the test. But I moved to Texas since I got a job related to my degree and in this state you are allow to have a seat for the FE once NCEES approves your credits, you don’t need board’s permission.
It depends in what state you are . If you are a civil engineer and you reside in Florida, the board only accepts evaluations from two institutions:NCEES and “Josef silly and associates” So if you are in Florida, as a civil engineer and you want to take the FE exam and PE , yes you have to go through NCEES I highly recommend you guys to get your credentials evaluated by NCEES if you plan to take the FE exam because it’s the only institution that all the state board accepts.
Video bastante informativo! Fiz minha transferência pela WES (World Education Services) e deu tudo certo. Mais uma opção para quem precisar.
Valeu pela ideia Luis! Thanks for the support!
Luis, você poderia ajudar a Karina Ingrid no outro comentário desse vídeo? Ela perguntou qual o próximo passo depois da validação do diploma e como foi a procura de emprego depois. No caso do meu amigo ele fez um mestrado, o que ajudou bastante.
Does the Florida board accept WES evaluation for engineering?
I guess it only accepts NCEES and “Josef Silly and asociates” evaluation
Thanks for sharing this information buddy!
I am a Civil engineer who has just arrived to Florida 1 month ago and I am working with a status of under-degree since I am working on the area of project management in construction.
I would love to develop my career as a structural engineer as I was doing in Mexico before my arrival.
This video was helpful!
Gracias Eugenio! Hope your transition to structural engineering here goes well!
Thank you!
Thanks, this will help a lot
You’re welcome Sharmarke!
Obrigado pelas informações Eugenio. Alguem pode dizer como e o exame? Sou formado engenharia mecanica, mas trabalho na aviacao na area tecnica operacional. Gostaria de tentar validar a engenharia
Excellent video!!! Very informative!!!
I'm looking forward to validate my electrical engineering diploma. In Florida, after having the equivalence arrested by NCEES, what's the next step? Do the Fundamentals of Engineering exam and registering on the Board of Engineers?
Thank you! For civil engineering that would be the next step. I believe it is the same for electrical. Best of luck!
Hi sir should all my documents apostatized by the US in my country of residency where i take an FE?
Why its written unofficial on it, what does it mean please?
Hi Avo, it’s just because this is an example.
Você sabe me informar se tudo tem que ser original quando enviado pra NCEES?
A NCEES tem um tradutor oficial?
Tenho que traduzir as ementas todas ou eu brevemente posso fazer uma descrição de cada disciplina?
Um vídeo explicando isso seria de grande ajuda. Obrigado!
Creio que a cópia traduzida e juramentada é suficiente pra NCEES. Se vc olhar no site da NCEES, acho que eles tem um exemplo das descrições de curso. Creio que são só descrições breves e não a ementa completa. Valeu pelo comentário e boa sorte!
thanks brother for this helpful info, i only have my bachelor diploma in hand in U.S. can i evaluate it or no should have my transcript too to be evaluated? thanks for your answer in advance🙏
You’re welcome! You’ll need your transcripts showing all the courses you took. That’s how they evaluate your degree.
Which ones are the certified translation agencies for making the transcripts? Any advice on this matter? Anyone with a similar question?
I believe most certified translation companies would be acceptable, but if you want to be sure, you can always contact NCEES to double check or your state board. For Florida, for example, they list another agency that can do the credentials evaluation (see links below). That agency may also do translation. Hope this helps!
fbpe.org/licensure/licensure-process/
Olá! Muito obrigado pelas dicas e informações! Acabei de passar pelo evaluation e estou missing 6 hours em General Education. Baseado nisso, qual seria o próximo passo que eu deveria dar? Obrigado desde ja.
De nada Alisson! Eu creio que você só tem que pegar matérias aqui nos EUA que completem essas 6 horas e depois enviar o histórico ou algum tipo de comprovante pro NCEES ou o órgão através do qual você esteja fazendo o processo. Antes de se matricular nas matérias, eu recomendaria você entrar em contato com o órgão pra ter certeza que eles vão aceitar as horas e confirmar o processo de validação. Obrigado por acompanhar o vídeo!
Hi! If I already have an evaluation from WES, can I just send the report to NCEES or I have to evaluate my diploma again? Thanks
Thanks for this wonderful video
my question is that my credential evaluations meets ncees standards. is this means my degree is validated or is there additional steps required to validate?
and i want to apply with Virginia state Board
thank you in advance.
Hi there, it depends on the state board. Most of the time, this is all the board needs. However, I’d contact the Virginia board and ask them if they need anything else.
Thank you so much, im civil engineer from Peru, my university is been acredditaded by Abet, do i need to send the course descripcions ? Or do i need to pass the credential evacuation?
I’d recommend you email NCEES. If your university is already accredited, you may need to do less steps.
Hello bro, my credentials already evaluated and already have an unofficial report. I have this option now of sending this unofficial report to a specific board. I will be migrating to Chicago,Illinois sooner and they have this three boards in Illinois. Illinois PE, Illinois LS and Illinois SE. What should I choose? Thanks.
Congrats on getting the credentials evaluation completed Renz! It depends on what license you’re pursuing. If you are going to apply for a PE license or try to take the PE exam, you’d contact the PE board. I would send them an email or give them a call before sending the documents to confirm they are the right option for your needs and the next steps.
Hi I am electrical engineer graduated from pakistan and have also done Master in project management.Should I evaluated both
Hi Raza, thanks for watching. It really depends on your goals in the US. But I would say definitely getting both evaluated once and for all will maximize your chances in the job market. I hope it goes well for you!
I submitted my educational certificates with NCEES and it says that your institute have to mail the degree to us for evaluation but my institute in Pakistan told that they only email documents to the body as per the policy .what should i do in this case ? Thank you
You can try having someone (a friend or relative perhaps) get the hard copies from the school in Pakistan and mail the documents on the school’s behalf and see if NCEES accepts it. As long as the school is fine with it, there’s a good chance NCEES will accept it.
Primeiramente, parabéns pelo vídeo.
Entretanto tenho uma dúvida. No que tange a profissão de Engenheiro nos EUA, todo e qualquer profissional deve se tornar membro de um board, ou esse vínculo é aplicável apenas para alguns casos (ex. prestadores de serviço)? Fazendo um paralelo com o Brasil, sendo você funcionário de uma empresa ou um prestador de serviços, é necessário que haja o vínculo com o CREA. No caso dos Estados Unidos, isso não ficou claro.
Assistindo à alguns vídeos, notei que à adesão ao board é muito mais comum a Engenheiros Civis, creio que para poderem assinar projetos como prestador de serviço. É isso mesmo ou minha interpretação está errada? Posso deixar de ser membro de um board e ainda assim exercer a função de engenheiro mecânico como funcionário de uma empresa nos EUA?
Obrigado!
Muito obrigado Agostinho! Tem muitos profissionais que não são membros de um state board, mas eles não podem assinar projetos. Nesse caso, eles trabalham em uma empresa com outros profissionais que podem assinar.
Na engenharia mecânica é mais flexível ainda, no sentido de que tem mais profissionais sem afiliações a um board (licença PE por exemplo), porque licenças não são tão requeridas como nos ramos da engenharia civil.
Olá! Muito obrigada pelas informações! Depois de ter recebido a responda da NCEES, qual foi o próximo passo? Se preparar para o FE? Com isso o seu amigo estava hábil a trabalhar? Ele teve dificuldade em encontrar emprego tendo o degree de uma foreign country?
Olá Karina! Meu amigo se formou no Brasil, mas começou um mestrado aqui. Depois de validar o diploma pelo NCEES o próximo passo seria estudar para o FE. Eu recomendaria ver no site se tem como vc se inscrever e fazer a prova antes de validar o diploma porque talvez o processo de validação do diploma é necessário somente pra obter a licença.
Meu amigo estava hábil a trabalhar por que ele aplicou para uma autorização de trabalho chamada OPT depois do mestrado. Ele não teve tanta dificuldade para encontrar emprego porque o mestrado ajudou bastante. O Luis Nunes, no outro comentário desse vídeo parece ter passado por uma experiência semelhante. Vou perguntar se ele pode responder nesse comentário.
Obrigado pelo suporte!
@@QuickQuestionEngineering eu não entendi muito bem sobre fazer a prova antes de fazer a traducao dos documentos. Eu fiz quase todo processo de tradução. Falta somente a tradução da ementa daí eu estaria aplicando para fazer a prova. Então você dizendo que talvez não há necessidade de traduzir e somente fazer a prova ?
@@marceloricardo3668 Há sim a necessidade de fazer a tradução. O que eu quis dizer no meu comentário anterior foi que talvez você consiga fazer a prova antes de terminar o processo da tradução (se o NCEES permitir isso), mas você só vai conseguir a licença EIT (Engineer in Training) depois que você tiver passado na prova e terminado o processo da validação do diploma. No seu caso, parece ser melhor terminar o processo da tradução antes de tentar se inscrever pra prova já que falta pouco pra você concluir o processo da tradução. Valeu por acompanhar os vídeos!
Thank you for the video. So I did the evaluation and the outcome was unequivalent (missing 6 credit hours in general education) so what's next? any help is much appreciated
Tahreer, I would contact the board you applied to and ask what they require. They may require that you take those courses in an accredited university to finish the validation of your diploma. Thanks for watching and hope you get to the finish line on this!
Hello, I am registered and qualified early childhood teacher in New Zealand. Can you please help me how I can asess my degree over there. Thanks
Hi Manpreet, thanks for watching. Unfortunately I’m not familiar with the process for that major. I hope you’re able to find the right resources.
As an international degree holder, do you have to be a US resident to be able to register with your specific state board?
Hi Blue Beret, no you don’t. I would double check with your specific board, but I have international friends (non-residents) who took their FE exams for example. Thanks for watching!
I’m in the process to send my document, but I’m got confused because I don’t know if my university need to send my document or I need to send my document personally
That’s an important step. I think the university has to send it (per NCEES guidelines), but sometimes universities don’t do that service. If that’s the case, you may be able to send it on behalf of the university, with their authorization.
@@QuickQuestionEngineeringI will personally send my documents, because at my university they don't translate anything. thank you
@@leonelvasquez4687go to your university and take all the documents and go the certified translator to translate them for you and after go to the university and tell them to put the documents in an envelope and seal them after you can send them to NCEES on behalf of the university, don’t send them on your behalf and without they’re sealed by the university
If I have a Master degree in addition to Bachelors, will I get both of them evaluated?
That’s a great question! I am not sure if there would be separate fees for that or if they would do both for the same price. I would contact NCEES and/or your state board because I didn’t see this explicitly explained on the NCEES’ website.
@@QuickQuestionEngineering I have one more question, as an international degree holder, do you have to be a US resident to be able to register with your specific state board?
Hi Sir, I'm a Sanitary Engineer in the Philippines, do you now it's equivalent here in Florida?
Hi, unfortunately I don’t know about the requirements for that. Hope you’re able to find your answer.
Do I need authentication the college certificate or just send it stamped from the faculty directly
I think it just needs to be stamped from the faculty/staff directly
Thank you
Hello, I am a Petroleum Engineer graduated from Ecuador. Today, I started the credentials evaluation process with the NCEES, hopefully I won't need to take courses to meet the US standards. Anyways, my question is, in the case that I meet all the requirements with my credential's evaluation, what is the next step after this?
Hi Luis, congrats on starting the evaluation process. I think emailing the state board asking what the next step is would be a great starting point because every state has different regulations. Thanks for watching!
@@QuickQuestionEngineering Thank you. Today, I received the news that I have met the requirements and I sent an email to the board for the next step. Thank you for your advise.
@@luisalchundia2367 Great news! I hope your process went smoothly!
@@luisalchundia2367 what happened after that? What were the next steps they told you?
@@paraluisao76 Depending in what state are you planning to take the FE you will need to ask the board of that state for permission to take the FE. In my case, I requested that to the board of New York and they responded to my request two or three weeks after stating that I was allowed to have a seat for the test. But I moved to Texas since I got a job related to my degree and in this state you are allow to have a seat for the FE once NCEES approves your credits, you don’t need board’s permission.
Brocador!!
Valeu Italo!
NOW LEARN ENGLISH, THEN YOU GONNA HAVE A VERY PROFITABLE WAY AHEAD!
Hi! If I already have an evaluation from WES, can I just send the report to NCEES or I have to evaluate my diploma again? Thanks
Hi! Sorry, I’m not sure about this one. I’d send your question directly to NCEES
It depends in what state you are .
If you are a civil engineer and you reside in Florida, the board only accepts evaluations from two institutions:NCEES and “Josef silly and associates”
So if you are in Florida, as a civil engineer and you want to take the FE exam and PE , yes you have to go through NCEES
I highly recommend you guys to get your credentials evaluated by NCEES if you plan to take the FE exam because it’s the only institution that all the state board accepts.