How To Deflate and Pack Your Inflatable Paddle Board

Here's how to easily deflate your inflatable paddle board and roll it up so that it fits correctly in your board bag, and without damaging it.
Start by locating the valve where you inflated it.
Release the valve cap by rotating it counter-clockwise.
Press the pin down to lock it in the DOWN position to deflate.
Air will immediately start exiting the board.
It might be a little loud in the beginning.
If you have the double chamber board,
follow the same steps for the inner chamber.
To deflate it faster, you can use the Tiki pump
connect the hose to the DEF Mode, located on the handle of the pump.
Make sure the pin is in down position,
so you can start pumping to deflate.
Once all the air is out of the board,
fold your board from the nose to the tail.
This will help to release the rest of the air out.
Make sure that you press on each fold.
So it will help to fold the board nice and tight.
When you find the valve point,
don't forget to return the valve cover
and make sure the pin is in UP position
so we don't allow any dust to get in the board.
Continue folding to the tail of the board.
Now you are ready to pack the board into the board bag.
We need to make sure that the final fold
should have the fin box on top of the other folds.
Place the board in the bag with the fin looking up.
Secure the board with the compression belt.
Now you can pack the equipment
and the first step is to disassemble the pump.
Remove the hose and
remove the base from the Tiki Pump.
Place the pump in the inner pocket.
Secure it with the belt.
Keep small equipment in the other pocket and
lock them in place with the belt.
Close the bag using the zippers.
Connect the compression belt to reduce the pressure to the zipper.
Featuring Rocio by Arunee. Shot at Starboard SUP HQ - Taco Lake, Thailand
How to inflate: us.star-board....
How to deflate: us.star-board....
#sup #paddleboard #standuppaddleboard

[@kevywilliams3304]

TUEN THE VALVE PIN TO THE LEFT !!! It will lock down ! You don’t need to hold it down !

[@fluminox13]

Thank you, you helped me escape the lake

[@ivowillemsen]

I lost it when she said "super thight".

[@ceeweedsl]

My 11'2" board is 31 " wide but came with a 44" tall bag. It's a huge bag and does not fit right at all. Yours looks like it fits right. Did they send me the wrong bag?

[@lewisdow]

Tu eres española sin duda

[@deans0209]

That wasn't fully pumped

[@douglashayward]

Thanks, really helpful

[@adreamclellan6924]

Excellent video. Thank you

[@amilaandarage9734]

Hi what's weight of bag with all the accessories

[@leecattell6548]

Awsome, thank you!

[@basedpatriotLT]

where is the padle?

[@kgb3404]

Hot damn!

[@jessicawhittaker40]

Where did you get the bag please ??

[@colinwilliams2085]

Best packing video so far.. ot does help when there's a beautiful girl doing the demo..

[@asteiner9181]

Does the paddle come in 2 or 3 pieces stored with the bag ?

[@Kappa_M]

2 but there might be a third piece to swap from a single to double-sided paddle

[@sampangolin]

Depends on the paddle, they sell 2 or 3 part models

[@kevywilliams3304]

You should be using a towel to wipe it off with every roll .

[@chrysopraisejayoma7275]

amazing!

[@kevywilliams3304]

YOU NEED TO SAY HOW BIG TO MAKE THE FOLDS .. and that you DONT HOLD A STICK ON RING!

[@sampangolin]

Pardon?

[@lukaspodoba401]

And what about the paddle, guys?)

[@orangetoucan148]

I have a simple pump, no deflate side or mode. How to keep the button down? Disappointing that the SUP instructions do not include this important part.

[@danmorrison667]

Push the button down and turn it to lock it in position.

[@belenchavez9018]

@@danmorrison667 @orange Toucan
To lock, i's about half a turn. If you turn all the way it doesn't lock..

[@croningw]

Locate the BALVE,lol

[@songyanwang7665]

请讲中文甜心😂

[@kevywilliams3304]

I have 3 fins …

[@fluminox13]

Erster