Why this boot would save you in the Apocalypse (ND3)
Vložit
- čas přidán 19. 06. 2024
- SOLD OUT - Sign up here for the ND4 notifications - forms.gle/Q6osghGZ99WirJgb9
ND3 Sizing Guide
• ND3 Sizing Guide
Buy here to support the channel:
Sign up for the ND4 here - forms.gle/Q6osghGZ99WirJgb9
ROSE ANVIL EMAIL LIST:
Limited Edition - forms.gle/Q6osghGZ99WirJgb9
VIDEOS MENTIONED:
ND3 Unboxing - • Why? $619 Indestructib...
WW1 restoration - • Preserving 106 yr old ...
ROSE ANVIL CHANNELS:
Rose anvil 2 - / @roseanvil2
Rose Anvil Builds - / @roseanvilbuilds
ROSE ANVIL LINKS:
WEBSITE - roseanvil.com/collections/acc...
INSTAGRAM - / rose_anvil
TIMESTAMPS:
0:00 Intro
0:43 WW2 Munson Last
3:26 Leather
5:00 Lace to Toe
6:38 The Sole
8:05 Construction
8:52 Insole
9:30 Cut in Half
10:22 What’s inside?
11:00 Best Apocalypse Boot?
12:12 Smashing Sh1t
13:00 How to Buy
#nicksboots #thelastofus #leatherboots - Jak na to + styl
Get a high quality wallet, belt or MORE in the Rose Anvil shop here - bit.ly/44jXLNu
you really should just open your own store and sell shoes like this while doing youtube
I come from the future to warn you that the housing crisis wars of 2027 will create a massive calamity. The realtors and lawyers will split into 3 factions, all very well funded and equipped. You think that a lazy 550lb. realtor (the kind that charge you 2% instead of 3% commission) can't do much damage, until he rolls into your armored car and clogs the entire thing full of nacho cheese and random pizza slices.
You've never seen a war like it. I come to warn you and hopefully someone here can prevent it, before it's too late.
Where do I get these boots!!!!!I need two of them
"Nuclear bears "
LOL!
When can I buy these at my local Red Wing???
Waterproof, steel toed?
The main feature of this boot is the two-tone black and brown colors. This allows apocalypse survivors to use either black or brown belts without fashion clash, thus ensuring civilization will rise again.
Mixing leather colors is already a faux paid. Wonder if the black has gold eyelets and brown silver. 😂
lol
Plus just in general that combo goes well with a lot of colors
And of course our M65 jackets (we have these, right?) mostly in Olive Drab go very well with these colors.
True Facts!
I was scout in the military. We never melted wax onto our boots. We were made to wear them into streams of water, and then we tightened the speed laces as tight as we could get them, and then we road marched in them. The boots fit like a second skin. The only "wax" that went on the boots was black Kiwi shoe polish. We did use lighters to heat the kiwi on the tips and heels for higher shine. We marched so much in our boots that white salts would come through the leather and Kiwi.
Military boots are made to be practically consumable/disposable, so no surprise there.
I think he was talking about during WW1
We?
He is also speaking to rough side out. Most if not all military boots except for a few versions of the "desert" boot are smooth side out. No need to seal with melted wax.
@@Heywoodthepeckerwood In the military, the order of operations are mission, men, and self. Independence in the military is non existent. "I crossed the Sava River with my unit," is condensed to "We crossed the Sava River." It's military jargon. You either get it, or you're an outsider/civilian who doesn't.
I'm glad there was an emphasis on repair, because in my experience (mostly office role in an industrial environment) even very nice boots rarely make it to 18 months. I'm not particularly rough on my boots, but the mileage adds up fast.
Same here, but on a horse farm. I'll go through a pair about every eight months. Mud season just kills them.
That’s probably the issue, you are buying “nice” boots. The cheap Walmart boots with the fake leather cuff lasted me two years of hard use, kicking shovels, walking on metal roofing screws, repeatedly soaked and dried (south Florida). My cousin bought the same and used them for ac work, he never wore them out, just got sick of them. I’ve noticed that boot quality doesn’t increase with price as with most other industries. The companies making good boots are considered “trash” because they charge half the price of “nice” boots that wear out rather quickly. The other thing I noticed is thicker boots don’t last longer than thinner walled boots, the thinner leather flexes better and is less prone to cracking. It’s all about the design and quality of materials. Those cheap Walmart boots lasted so long because they used a hybrid of materials, not because the leather was super thick.
Mine (from Walmart) last about 4 months what brand you buying form Walmart, also from Florida BTW
I got a pair of Tractor Supply boots maybe $100 - $130 and they lasted me over 5 years.
I help my father in law in the cow field, and in hay fields, do maintenance and yard work, hunt an fish.. I also been on a few trails with my kid more or less hiking. I got a boot dryer, and I use boot oil, and boot polish.. sometimes it's all in how you treat an take care of your boots.. I was in the Army back when we had black boots to tale care of, and I still got one pair over 20 years old still going strong. One I worn the sole out of and I think I lost one good pair over the years. In the Army i usually had me 3 or 4 pair of military boots an a couple pair of sneakers.
My grandfather back when I was a young boy had taught me how to polish and help him with his shoes and boots, he was a mechanic, welder, he built a couple homes, and he was yard guy..
It isn't always about the price of a boot that makes them good.
I've had a pair of red wings outdoor hiking shoes last over 2 years with heavy use, and I'm still using them. I work on a ranch.
Hello Rose Anvil. I have lived my life in boots. Worked in factories around heavy machinery, pallets, obstacles and massive solid equipment, beat the pavement as a paramedic, backpacked my entre life, hiked and caved for 50 years, worked on heavy equipment and run a farm with all it's footwear abuse. I respect your channel and knowledge and love your boot tear-downs. My question is this; the majority of my foot injuries and foot trauma have occurred on the outside, the distal metatarsal or outer side of the foot. It is nearly impossible to find boots with side protection and I am surprised that your joint venture with Nicks doesn't address this. The boot that is represented in this video has additional protection on the inside but not the outside. The volume of foot injuries that occur to the soft tissue and bone structure on the outside of the foot is well documented and I wonder why boot manufacturers don''t address this by adding additional protection. My point is fully illustrated in this video at the 5:39 mark and view of the boot and the abuse the outer side has taken in just average everyday wear. Wouldn't it have made more sense to design a boot with extra protection on the outside as well as the inside? Thanks for your hard work and videos on boots but I'm still looking for the right boots for my feet and active lifestyle where my feet take a beating.
Amen to that.
Right? I've yet to find boots that won't chew through there on the sides. I'm a welder and the amount of slices I've put in the side leather when I'm moving though pallets of sheet metal is nuts. That and it's a flex point, and gets impregnated with iron dust which just destroys the leather from the inside. I just want a boot that has a second heavy layer of leather that doubles that area up so it can get unstiched and replaced without having to re-make the dam boot.
That seam on the outside edge would 100% bust. It's already starting to roll and the stitching isn't even chafed yet like it would be in 6 months
Roofers boots have double side leather that's incredible tuff
Maybe there are more traumas on the outside because the finders and downside is where the most protection goes?
I mean you cannot make a boot that is equally protected from all sides otherwise it will be unalterably heavy and bulky. So you need to choose the areas that needs most protection? And if manufacturers would switch to protecting sides we will see the change in statistics and most traumas will come from sole punctures and toes crushing?
Tru
Saving my Rick Owens for the end of the world
The drip will cure the water crisis 🥱🥱
Running from zombies in my cargo baskets
@@crooked9210kiss boots *
Might as well die with style 🤟
Playboy Carti's zombie corpse will mug you for them
Those boots are awesome! That said I'll see you in four years after eight raises so that I can afford a $700 pair of boots.
Great thing about $700 boots? You only need to buy them once.
Six months and one day later my 14’s have arrived. They are beautiful. Now what to do with my everyday Jim Greens.
Since retired from the railroad, my boot buying days are over but I have to say, I was thoroughly impressed by these boots as well as the content and quality, time and effort you put into this video. Awsome.
Wow. Good job, man. Sold out a years worth of work in days. The world is beating a path to your door. That's an amazing accomplishment. You've set a standard for more than just boots. You've got my admiration.
Probably my favourite feature on this boot is the 360 stitchdown, simple and works. I wish I can afford this boot, someday maybe👌🏻
If you want good custom boots Jim Green International is your friend. I just ordered custom tactical boots made on their AR8 platform for under $200 with shipping.
What would be interesting if Rose Anvil did a collaboration with Jim Green. RA has been sponsored by them and for the money one pays for Jim Green boots, there is a reason why they've made people's heads turn for the quality and prices of the products along with the videos they produce as well
@@TOKOLOSE Jim Green is good but shipping+tax+handling to Indonesia will be equal to buying a handmade one here, another reason is I want to try Nicks boot, I like the silhouette. So far I never see Indonesian bootmaker with the same silhouette/shape as Nicks, the closest probably logger from Prof. Barnet which is pretty good, but I want that specific look. I sound so picky but yeah just throwing opinion 😂
@@frackedlithium1722 a collab with Jim Green hiking boot would be nice in my opinion.
@@gymkena 🤷♂ well you are spoiled. I was offering JG because I consider boots like these as working boots not as fashion accessory. I had my original pair of IR for 10 years as work boots but needed to get some for light mountain forest work too so I went custom JG. If you look for fashion statement then I will comment no more.
These are quite possibly the sexiest boots ever... but I'll never own a pair at 600$. I understand a lot goes into designing and making them, but they won't be saving me from any apocalypses anytime in the foreseeable future. They're beautiful and the attention to detail is amazing. That said, all I got is a broken heart and these second-hand combat boots I wear to work every day. Really great job, though. :)
I have a pair of boots popular among wildland firefighters which cost me about 500 bucks. I replaced the shoe strings with Paracord and the boots have lasted me 8 years. They have been buried in mud while I'm working a trench, they have gone on rocks mountains, I have worn them as a volunteer firefighter and construction worker. I could squeeze another year or 2 out of them if I needed to. Definitely worth the investment if you are going to use them because they are meant to take a lot of punishment
A name would be nice so we could look them up.
@@killcharge4338 except that a Keen boot will do almost exactly the same thing for a hell of a lot less money.
It's ok just find out where you can pick them up free when the world actually ends
@@mc4906I love keens but they’ve only ever lasted 4-6 months before literally falling apart. I want more because of the fit bit I just can’t.
Would love to see a series where you take some of the best boots and test them rigorously to see what boot would be the all around, best balanced boot. Would watch the hell out of that
Congrats on making the apocalypse boot. I'm very impressed with the amount of work and effort your team put on it. The only problem I see is the actual toe box being too narrow. I was going to buy one, but I know it would just cause me severe toe cramping and pain in general. the only improvement I can suggest for the next generation of apocalypse boot is to make the toe box wider, similar to a minimalist/barefoot shoe.
some militaries use slim, medium and wide sizes along with the normal lenght shoe sizing, thats probably a must if you really wanna give everyone a confortable boot.
I second the wider toe box. I’ll take these in a heart beat if my toes aren’t cramped
@@MarkWildman I probably couldn't quite swing these, but if I did these would probably be it. But I'm the same, toe box width is everything to me. But it seems my feet went the opposite of the trends. I just turned 40 and it seemed as I had High Arch and a wide foot especially in that toe box area; more people were getting flat feet and tight in that area.
did u find one?
Just ordered a pair. I’ve never been so excited for a pair of boots in my life
My gf does airsoft and stuff like that, and I sent her these because she's been looking for a new pair of boots. I know that y'all know what you're doing, and this video explaining why you made the choices you did for each piece of its construction sealed the deal for her to put in an order. Especially because I've shown her some of the videos on past types she used to get and just explaining why they won't last is great. Thank you guys for putting your knowledge and experience to good use in making a product worth its price that's actually useful!
This would be a horrible boot for airsoft or any application in which you have to run or move quickly.
@@johnnyregs2378 not really. If they’re fitted right and worn in they would be just fine. That style of boot is made for people on their feet all day.
@@Samplehorse standing and running are two different things. I wore Danner RAT boots on my first deployment which were very similar to these. Heavy with a foam under rubber sole and stitch down. They were crazy heavy and the foam fell apart. I switched to lighter and more hiking/overlanding style boots for my next two and it was worlds better.
@@johnnyregs2378 Danner doesn't compare to nicks. just throwing that out there
@@Spheregrid2 I agree, but throw a pair of these on and run 100 yards and then do it with a pair of tactical lighter weight boots designed for rapid movement and tell me which ones feel better. That's all I'm saying.
brother man, youre a bonafide craftsman. rare in the mass production age. Also v informative. Its great to see how you branched out and monetized your skills beyond the usual scope of a tradesmen.
I can't believe I missed out on them. I've wanted a pair of nicks boots for a while but have been worried I'd order the wrong size. These boots are exactly what I would have figured it out and pulled the trigger. Beautiful boots, and exactly what I need if they really last that long. I will be keeping my eye out for the ND4's.
I think you can sent boots back to Nicks if they dont have wear if they wont fit
I feel like this boot needs a companion boot that's just ridiculously overbuilt and heavy but everything is there for a reason and assumes the person wearing them is going to have enough protein in their diet to adapt to them. Like having a steel toe, 3mm leather all the way around, a quarter inch steel shank, etc. Just some over the top, built to last through your life and your son's life type boot. The kind of boot you get as a gift when you're about 25 and last longer than your knee cartilage with little more than some oil every few months.
did you see the weight? these are already ridiculously overbuilt and heavy... steel toes would be cool for a work boot, but your mobility decreases rapidly with more weight.
This is exactly what im after, maybe a slightly wider toe box too
The more I watch ya the more things I find to like! I'm 21 and you've been a phenomenal help in researching my first pair of higher end footwear, I ended up with the iron rangers last minute after being deadset on Moc toes for a couple weeks (go figure). From the history and craftsmanship to your presentation and fanbase, thank you for making such a great and informative channel and community. Cheers
Do a vid on your Rangers? I want a pair soon. Can't decide on brown or black.
My favorite boot is the Corcoran Field Boot which is basically a Jump Boot with this exact kind of midsole and outsole. This looks like a everything good about that boot and then some!
Cool boot for the Apocalypse. A little expensive for a guy like me. I saw your video on Lems Summit Bolder boot so I bought a pair. These are extremely comfortable and more affordable and will likely be my apocalypse boot or maybe for just knocking around or shoveling snow.
These seem awesome, but a safety toe for the next iteration would be ideal imo
ohh yes bro we have them in Indonesia, those boots are branded as AKAR (roots) of NFYR
I'd prefer the leather toe box warmer in winter.
Same here. Can't go to work without safety boots. A kevlar insert would be best.
@@moorshound3243 preference dont figure into it, rules are rules and if a red helmet catches you without steel in your toes you're fired
I'd think a safety toe and midsole would be standard for an apocalypse boot.
I work as a Jet Mechanic now but worked as a Linesman for a few years, I can testify how tough on Boots that job was, I wore through four pair of Redwing in 1 year. The company had a contract with them is why I wore them, most were fairly comfortable but not as nice as people think they are for the price. I have a pair of Nick's I bought a few years back, took a while to break them in, for sure one of the best made Boots I have ever had, not actually expensive when you think about it, they will last 20 years.
You dont have to wear steel caps?
@@ml6158as an electrical line worker?!?! Hahaha
@@ml6158as a person who may just prefer to wear boots over shoes?!?!
@@ml6158no, you don't hafta wear steel caps bro... You can buy, and wear boots, without steel capped toes, at your leisure. And often, even at work!!
@@travisjohnson1500lol
Yes weight does cause more fatigue the more it weighs but you train yourself up to get used to the weight.
Ive worked with 5bls boots since I was young.
Weight becomes negligible to a certain degree if you condition yourself for it.
I'd say if one factor of boots to not give much care would be weight if you can manage your body's fitness to compensate.
I finally got mine in January wore to work all day and they were great love them
Second boot in a row that's been released right after I had to pony up a huge amount of money for something else in life. Sometimes I swear you guys have my house tapped.
Payment plan.
I love these history segments, really elevates you videos.
I'm really looking forward to the nd4. I'm ready to order right now.
Really hope it's not too much different from the nd3, honestly this is perfection.
The waxed flesh, two tone, munson last, double vamp, the hardware, perfect.
Same I'm mad I missed out on these I hope the nd4 isn't too different
This is an awsome boot dude! can't wait to get some next year
Weston, each video is filled with functional and often historic information. Your collaborations with companies and other footwear CZcams channel hosts are welcomed and exemplary in spreading useful information to those of who take boot wearing seriously. By the subscriber counter, we are numerous and gratified. This video demanded that I finally comment, after watching for the past year. I find military footwear history to be very curious, and interesting. Once I had access to the multi-volume pictorial history of WW2, and centered my search on footwear. Dire supply to our troops made re-crafting of field boots necessary, in far-flung theaters around the world. Lasts were narrowed in the process, so sizes and fit shifted. It is utterly amazing we were able to keep troops clothed and shod in the world wide theaters, So, thank you for the background on Munson, and the visuals you have taken the time to incorporate with this video. Cap toes are my preference in nearly all my footwear. Thank you for what you are doing. DJ in Knoxville TN
Just because of this video today I'll wear my army boots from the 90s. Issued in 1984, went with me all through the wild 90s. Climbed me up to the top of both Chirripó and Ventisqueros Mts. here in Costa Rica. Like you said, beaten up, some parts had to be mended and replaced, but nothing a good oil treatment won't fix...
😮 👢
If you're referring to the black leather boots with thick rubber soles, yeah they can last a while. There's nothing comfortable about them no matter how much you break them in and require a lot of insole assistance. I marched so much in those style boots the leather was soaked through with blood and sweat. I've long since moved on to the more modern style. Still, there's something to be said about nostalgia and grit. We were a different breed back then. I would keep those old boots in a footlocker, but I definitely wouldn't be walking and hiking in them. Way better options out there today.
Thank you for your surplus !
But he said modern boots will melt on the shelves after 5 years! How can you have boots from 1984 that are not puddles of goo!?
Gawd, I hated those army boots. No speed laces, pain in the ass when you had to put them on in the dark. The tread on them were paper thin with crappy grip. Not even allowed to resole them with something decent like vibram.
I hope more will be back to be bought. Im really digging these boots
Just found your channel. This is awesome. Artisans are a rare thing now-a-days.
I love the design. Function over form...form flows from function. I design stuff the same way. Great job.
Ordered mine yesterday and hopefully I was one of the first ones to do so. Because I made my purchase at around 6 minutes after 9 in the morning PST. Can't believe I got a pair and can't wait to try them out!!
Yeah let me know when you tried them out, I'm curious just how uncomfortable the will be.
I've been needing to buy new boots for some time, and here's a video in my recommendations, and you know what, I ain't mad, going to see if I can afford it
You ain't kidding... These are awesome
Great content.
I am an arborist and ex wildland firefighter.
I can attest to your comments about durability. Alot of new hires buy $200.00 boots...two or three times in their first season..
I am intrigued by your use of foam (EVA I presume?), in the midsole. I have never had EVA midsoles last more than a year at most, usually six months if worn daily and this with brands such as Merill, Keen and New Balance.
They feel great until they don't and I am left with an upper and perhaps even an outsole that have lots of life left but can't be repaired so your design is intriguing to say the least!
Do you have any data yet on how long the foam midsoles will last?
Most running shoe companies seem to claim 3-500 miles.
Even that would be fine.
Sometimes we work areas where our days are miles and miles of mixed pavement and non-paved areas.
Even a pair of Hotshots can become very uncomfortable in a few days of paved surfaces.
Being able to replace an EVA midsole would be awesome.
Thanks for great content and for providing real insights.
Cheers!
Great question. I'm curious as well.
get fp insoles
@Mathos93 Hi
FP fails in two places for what we do.
1. Durability... They don't last a month in steep terrain. I think that the non-newtonian fluid may settle when we traverse steep side hills causing wear. Not sure.
2. Not stable enough. Very poor support when carrying gear in the terrain we work.
To give you an idea, one circuit I worked this year consisted of hiking 8 to 9 hours headed in one direction, traversing a 50 to 60% grade...no fall protection either. If you are headed North, the entire day is spent edging the right side of the boot. After that slog, we had to walk paved highway for 4 to 6 miles to return to the truck.
I would guess that 90% of us are using Superfeet. Even those only last about three months, but you're not gonna sprain an ankle.
The thing about an NFPA stitch down boot is that it contains your foot in such a manner as to completely support it. Cushioned insoles have a deleterious effect on that support.
This is what makes a REPLACEABLE EVA midsole attractive. The foot is still completely supported in the boot. The cushion is outside the vamp.
A replaceable EVA midsole could be a real game changer even if it needs to be replaced seasonally.
I would definitely consider the FP for a running shoe or light to medium duty hiking boot though.
Cheers!
@@seanwoodburn2616 Wow! What truly humble yet serious and straight to the point feedback. Doesn't seem at all to have much myth or too much attachment to anything. Maybe its because my father was a DNR officer and did Aerial Forest Fire Attack Lead Plane so its the kind of style I'm kind of used to. Thanks a lot for taking the time.
While comfortable - I agree that the foam and sole is the weakpoint of this boot, at least for the 'apocalypse' selling point of them. After a year the sole WILL start breaking down, regardless of whether they are used or not (I've noticed ALL of our NFPA soled boots crumble to dust after 1-2 years even just sitting in storage). It's just marketing at this point - the best bet in an apocalypse is to have multiple pairs made of materials that are shelf stable for years hehe
GREAT boots man! NICE work...
One issue troops in WW2 had found out the HARD way during cold, freezing-thaw cycles & wet weather, with the suede side out, is that it would more readily absorb H2O, then poss freeze, inducing foot injury. The weaker, less absorbent, more wear n' tear prone slick side that accepts polish a bit more readily for that needed/wanted/expected parade-dress shine was the solution for that prob, turning future boot manufacturing protocols 'inside out' so to speak...After that adjustment less wet weather induced trench-foot/frostbite issues were seen...
Of course aggressively waxing/waterproofing the suede side out certainly helps, but not when your standing/walking through puddles mid calf deep, well over the top of ones boots...
An example n' issue akin to the M.V Titanic...er,...um?..OOPSIE!? -The M.V Olympic's 'waterproof' hull bulkhead compartments NOT being SEALED/welded/riveted/caulked to the bottom side of the adjacent next deck ABOVE^ it..
Just Puncture the hull wall, then the water subsequently would fill up within the bulkhead, then right over the open top & spill directly into the next 'waterproof compartment'...Apply, lather, rinse n' repeat, all the way back to the rearmost aft section for the ultimate example as to an undersea paper weight!...;)
I looked at the cancellation availability and it was the Munson last that sold me on taking advantage when they became available again. I look forward to receiving them in February.
Had a great pair of boots with cork under the insole. Fit my feet perfectly.
Wow, that's messed up. I learned so much from that trench foot video. Hope you're able to get it back up and earning.
Man one of the only CZcams boot channels that actually puts their money and mouth to the test with their own sponsored product from Nick's.
Genuinely the best looking boots I’ve ever seen.
Towboat/tugboat deck hand work is super hard on boots. They frequently get wet/dry/wet/dry and suffer through huge temperature variations with steel barge and boat decks varying from well below freezing to hot enough to melt sole material. Back when I decked, I was lucky to see a pair of boots make it through 6 months.
Awesome boots man!! I'm a man on a budget or I would take a size 12 in a heartbeat 👍👌 keep the awesome content coming!!!
Glad you went with last first (hah). Having a good Munson last has been one of the weak points of Nick's imo, so great to hear that this is now an option.
I can really appreciate a lighter sole when it comes to boots. Most of my problems with work boots and boots in general is the weight of the sole because of the forces it exerts on my joints when walking, particularly my knees. Since I have had some knee problems since I was a teenager, hiking and talking tends to inflame theses specifically when wearing heavy footwear. I'm assuming this is because your legs are essentially a lever system where the forces to move the lever are concentrated closer to the pivot point so the more weight on the end of the lever means more force and stress exerted on the pivot point or joints.
Nicks, Whites, Hoffmans, Vibergs, West Coasts, Drews and JK's are all handmade boots that are great for heavy duty work. As a forester, log truck driver and former logging contractor, I have had quite a few pairs of these boots (White's and Hoffmans). They all leak like a sieve. The type of construction used to make these boots makes them difficult to waterproof. They are great for dry weather. If they fit you properly, they are an all day boot that will give you great support. They can be rebuilt several times. They are are not cheap but last a long time so the cost can be amortized over many years. Just plan on something else for wet weather wear or get used to wet feet.
I had whites for firefighting and danners for military.
Holy balls. This will be the 4th pair of boots I’ve bought in the past year because of this channel.
Wow, you are rich!!!
That tells me you’re buying the wrong boots
@@barlux88 OR, I like a variety of footwear.
You should make a boot that truly is Foot shaped like VivoBareFoot shoe company. Those boots still push your toes inward. Once shoe companies acknowledge they are doing it wrong we'll see a greater revolution in the shoe/boot industry.
Jim Green is launching a pair of barefoot style shoes, of proper leather stitchdown construction. I don't really know of anyone else that does that. Maybe some obscure German or Austrian one-mam-shop, idk. But as far as larger companies go, I think they're it.
@@SolidGoldHedgehog I'll have to look into that, thank you!
Love this video. Inspirational on how to make a boot.
Damn those boots look nice. I prefer the non lace-to-toe style for looks, but now i finally know the reason logging boots have the extended lacing. Thanks!
I had a few pairs from one of the most popular outdoor footwear labels. It was a shock to find out the soles simply deteriorated to the touch like Oreo cookies after one of my neighbors in the apartment complex had an infestation of bed bugs and they used a high-heat treatment to get rid of them. The exterminators listed a bunch of things to remove from the house, but they did not mention shoes. Other shoes survived, but these, advertised as durable, did not make it.
I don’t know if you’re talking about the quality of the shoes in this video or the popular outdoor labels you mentioned
Man I wish I had 620$ because I love the design philosophie behind this boot. Man I never even thought about how important a good pair of boots is. I hope I will have the spare money before any apocalypse breaks out.
Right! Where I live thats 3 months wages.
This was a way better sales pitch than I expected based on the video title. If I could try these on and be perfectly confident in my sizing: I think my desire to cop would have overcome my knowledge that I do not need them.
As the saying goes, you get what you pay for. I'm likely too late to the party on these, but I would expect a hefty price point for such quality construction; however, being specifically designed for sole repair by a cobbler, unless one possesses the same tradecraft of a master cobbler, is another selling point for me personally. They're on my radar now.
The only thing painful about these boots (other than being stomped by them) is that I can’t afford them. Great boots and the lace to the toe design rules!
Wow, amazing boots, I wasn't looking for another pair but how can any red blooded guy resist! Great choices in the last, 360 stitching, outsole, leathers etc! Thank you, the ultimate Apocalypse/ 'hold my beer' boots.
Well put sir...well...put...
Something I experienced with one of my work boots, the only one that lasted over 3 years, was the brass shoelace eyelets getting worn through the metal, and becoming sharp enough to cut the laces every week.
Ball bearing lace races are awesome
These look neat, although having worn the same boots from -40ºF to 110ºF something like a fire and ice style sole is pretty valuable for myself, a lot of rubber soles just become rock hard and very dangerous when walking on any type of wet and cold surface. Melting can be a problem in the sand, although I don't spend much time in the sand as much as on rocks. Shank protection has been very valuable as well, it is never fun having to deal with the consequences of an injury from stepping on something sharp.
While I really enjoy the breathability of mesh uppers, sometimes, their mixed water resistance, durability and cut resistance do end up with faults. If you had to run for days, it might be a good option but if you could take them off at some point the leather would probably be my choice for lifespan.
Very nice. Been following since my attention was drawn to more natural 'barefoot' hiking boots. Can't beat this channel for seeing what you actually get. I'm torn between these ND3's and JD OT Bison's shown earlier. The thick/thin/give of bison leather draws me there (and how good it looks). But these look very nice. I suppose it comes down to weight, and how close to 'barefoot' they align to, for me anyway...
It could survive the ensuing riots when Arizona Tea is no longer 99 cents due to inflation.
Those are fantastic.
Back in my "good old days" (early 1970s)of backpacking and mountaineering I wore Galibier boots. They had a Norwegian welt rough-out full grain leather and leather insoles. You couldn't wear them out, put many miles on them and still have them. My favorite are an old pair of Tony Lama cowboy boots that I bought in 1996. They were made with wooden pegs and have a wooden midsole. I wear them at least one a week. I used to wear US made Red Wings with steel toes. Heavy as lead, but extremely comfortable. they got salt stained from sweat saturation working in a 120°F+ industrial environment.
Well, that kind of over built tank hurts my knees just to look at it. But I appreciate the reasoning behind your choices, and your enthusiasm. The history of the Munson last was particularly interesting.
A "lite" edition might be in order with ergonomics taking priority over "indestructibility".
Honestly I think this guy is an idiot, I see he has a boot channel but has no clue about foot wear.
I mean look at the other "Profesional" with scientifically made running shoes that lead to knee surgery 😂.
First of all. Ditch the heal.
I know he not hiking for shit, or climbing anything. Lier
Because I DO climb and try running. All of the wrecks your feet and they over heat fast.
I'm 2x better shape than him , younger, and much stronger.
If I'm saying those boots suck they suck.
You need to stay light, speed is king, if your foots heavy you'll be tried very fast and forget doing a back-flip ...
Look at Indians what do they use.... dudes have been in SHTF mode for hundreds if not thousands of years . They don't use heals or super big 5lb+ boots.
These boots look and perform incredibly. My thought on this is I'd want a boot made by you guys that is based off this design, but a wider toe box. I'm a parkour athlete, and having a kind of boot made with a wide toe box would really assist in better connection with the ground. Is it possible you guys can do this?
Yeah, it surprises me that with all the info on the internet nowadays about the importance of wide shoes that they haven't made the boots wider. It's very important for foot health and stability!
I've been very impressed with the performance of my Danner USMC Speed Lacer RAT Boots. Waterproof Gore-TEX, Vibram 360 (Made in USA). No leather to stretch and the Gore-TEX hasn't failed me yet. Having gone from 20 years in EMS and LEO to homesteading, I have a pretty good feel for boots by now. That being said, I would just love to try these ND3 boots for comparison....but not on price!
I didn't know about that extra eyelet for the toe box until I bought my Saloman XA PRO 3D V8 trail sneakers. The speed laces go off center to to an extra eyelet (sp?) Very nice addition for stability and comfort.
Don't know why I watched this but hell I enjoyed it. Subscribed.
Cool boot. I'm a professional dog walker in Scotland and do 12 miles most days. I miss thick leather and don't mind stiff and heavy boots. Really like the lacing around the toes on modern Salewa boots though, particularly when it comes to challenging terrain so I'm not sure you've gone far enough here. Love the channel and look forward to more informative content.
I'm also a dog walker / trainer. Is there a boot you could recommend for long hours? I too usually get to 12-14 miles. I have iron rangers but they are just not comfortable for these hours and heat, so I've gone back to sneakers at the moment. Thank you sir
So what do you wear now?
Interesting boot, it would have been nice to see a steel or similar shank under the arch. Standing on ladder rungs or stirrups can easily bend the arch in very uncomfortable ways.
Not sure that the leather shank has enough structure to stop that pain from being transferred into one's foot.
Either way this boot looks good.
I used to climb smoke stacks at coal burning power plants that averaged around 1000' for a living, the ladder rungs are just 5/8" round bars. I'd have to agree with you about how much it sucks lol, it is a pretty specialized trade though, being on ladders all day. Maybe they could make a special edition with steel shank.
10 years on a ladder hanging siding , 3 years i had boot with steel shank i cried when i retired them 😢
A work of art !
Interesting video! Years ago I was in a World War series and we had to wear these heavy, clunky jump boots. Like the paras used to wear. I've worn boots nearly every day for work before that and whenever I go hiking, trekking, bushcraft etc BUT..these jump boots are rather high and rough. SO we were told to wear them and soak them in a bath..not hot water or ice cold just regular temp. Soak them then lace them up real tight and try wear them til they are almost dry. They'll fit like a glove and they really did!
Highly recommend those boots now. I purchased a pair after filming so when I go hiking they come with for the ankle support. Plus I feel that I earned them a little haha
$620??? And I thought Doc Martens were expensive
There are $2000+ boots out there. Regarding the hours put into such a small run I am not surprised about that price at all. You can always not buy them off course. Your choice at the end of the day. Doc Martens LOL.... 😂
@@vincidicaprio298 Never thought I'd see a Boot Elitist before. Enjoy your $2001 boots bro, good for you, still not relevant to my comment lmfao
@@GameZedd01 Then your comment is hardly relevant to this video though, with hand made products always being costly, why be that surprised about it? If you can't see why they are worth it, well, perhaps says more about you. Some people might just see Mona Lisa as a canvas with a few whacks of paint, I don't think I can cure that in a few words in some random comments section.
@vincidicaprio298 I'm not a boot-tard like you. My original comment was literally just about the shock of the price because up to that point all I really had reference for in terms of expensive boots were Doc Martens because, not everyone is rich and can afford $2000 boots so for most people $300 boots are actually really expensive. Besides, if you actually look at my original comment, it's obviously worded as a joke. But judging by your first reply and now this one, it seems you take your boots very seriously and can't have any fun when it comes to anything boot related. So enjoy your $2000 boots and I'll enjoy the party killjoys like you aren't invited too. Seriously, getting pressed over boots? Because someone thought $600 boots were expensive? You couldn't let that stand when you have your micropenis balls deep insids a $2000 boot? How dare someone not know boots get that much more expensive! Oh the horror! 🫠 whatever will you do?
Seriously get a grip. They're boots. $600 or $6000, the fucking expensive for normal people.
@vincidicaprio298 I bet u own some yeezy's too don't u? 🤦♂️😂😂😂
Totally missed the ND3 now that they’re sold out but looking forward to the next iteration of same style and color.
EDIT: Any chance you could do another order run for the ND3 if demand is still high enough?
These look so great! I still think the ND2 is my favorite, but these are awesome. The LTT was a great choice.
I had a pair of these (Altama) when I was in the army in the early 2000s. Loved the comfort and they shined really nice. Then in 2005 we went to the ACU and couldn’t wear them anymore.
I think if my wife found out that I spent over $600 on a pair of shoes that was NOT for her, I would seriously need those boots, 'cause shit would apocalyptic real quick. 😂😂😂
On the serious side...those are DAMNED impressive boots.
I'd buy these if they were available in just straight smooth black. Love everything about them just the multi color doesn't suit what i need it for
they will patina to brownish anyway and blend together
@@larifari_das i need something that can be used in a tactical situation such as security work with a black suit.
@@Forgoten214 Nick's already has a tactical boot model if I recall correctly. Worth checking out.
@LyonTheGreat really? I was looking for one on their website i didn't see one I'd definitely buy a pair if they did i use Danners currently
@@Forgoten214 Rose Anvil did a video on it: czcams.com/video/KKom-7u3J0Y/video.html
I don't have much need for it myself so I never checked to see if it's still in stock.
🤔 Never thought of slicing my shoes before. Good idea!
Thx for the boots history research. 👍
Impressive boots, a piece of art.
From my experience a good pair of boots have to be: (I ordered the points in order of importance)
Insole:
1. Wide. Provides good stability, reduces long term injuries and reduces discomfort (from my experience the only good fitting insoles are barefoot types), healty feet are wide.
2. Humidity absorvent. Humidity is a feetkiller and since the lower part of the foot cant dry
2. 0 drop. Reduces long term injuries, distributes evenly the weight through the whole foot, is lighter. Reduces gravity point.
3. No cussion. Most injuries after ultramarathons and other long term runs are cuz of friction, not cuz of cussion. If the shoe is comfortable(holds the feet in place) and the feet is strong you can run ultramarathons and jump from buildings. It makes the shoe lighter.
5. Durable
6. Thin. Reduces weight.
Sole.
1. Easily removable
2. Good ground grip.
3. Elastic and thin. Increases ground feeling, is comfortable, reduces weight and gravity spot.
4. Straight design most of the soles elongates the lower feet muscles producing plantar fascitis.
5. No cussion
6. Protective against sharp objects from the ground.
Also add in the tip a carbon fiber reinforcement in case a heavy object smash your toes
The rest of the boot is 10/10 from your side
Would it be possible to make this boot as a zero drop boot?? That would be amazing!
I've been looking for a zero drop well-made boot in the heritage tradition vs. space/hippie boots, or something that's at least not high heels for tough guys. Have yet to find one that doesn't look like a leather sock. Iron Rangers are fairly low-heeled, but it's still a disappointing hole in the market.
@@abrosh5434yep.
It just goes to show people who make shoes are idiots.
History as been filled with crap footwear, and today's still is.
That heal would get you killed in shtf, you need zero drop to sprint.
Because there's 100% not a 99% but a 100% chance when shots fired your sprinting. Every emergency is you sprinting.
Not casual walking , or doing that awkward run trying to cross the road.
A full balls out sprint to cover.if you don't make it, your dead
I would honestly love to just see that upper with a thick/tough sole on it. I’m used to heavy boots from the military, and would much rather wear a heavy, tougher, boot than one that would be easier to repair.
You can put one on!
@@kart182
Why should I have to fix mistakes from the factory?
@@Clockwork0nions it’s not a mistake. What I am saying is, due to the fact that you can put a new sole on, you can put on ten different types of sole on if you want to
The easier to repair part does not determine how strong or weak the sole is
I got some old converse canvas high tops . I always loved the high tops,the low ones gave me a heel blister.I got some timberlands boots too,awesome boots.
Looks like i will be making a boot purchase in the future. I love the look and it seems to have everything I look for in a combat boot.
Nice boot! A bit on the heavy side, but reliability rarely being lightweight..
I'm in love with these boots but I just picked up a pair of redwings, trying so hard to not add another to my collection 😀
It’d be really cool to see the patch on the inside bigger where it covered for a motorcycle shifter. All my boots see extra wear there.
holy moly, i wish i had seen this video on release
those are some beautiful boots, and they look VERY well made. just looking at them inside and out makes me foam at the mouth angry that i have spent so much money on Corcorans and Bellevilles and 5.11s and even a pair of Nike "Combat Boots" without even knowing these existed.
my first pair of "big boy boots" were some Corcoran Marauders i obtained at the age of 16 (i am 33 now) that had already been worn flat on the outsole. i took them to a local cobbler a few months later and he put on some fresh soles and they felt so good on my feet that i stopped wearing sneakers and tennis shoes completely. over a decade and a half later and i have at least 8,000 dollars worth of boots in various conditions. some were brand new buys, others were thrift store finds that i got repaired, a few i have yet to get cobbled because i just don't have the willpower to spend the 80-120 to get them resoled.
these boots however???? i would gladly pay hundreds of dollars for even a second hand pair. i relax, play, work, and live in boots and if i could ever had a work of art like this to add to my collection i would be overjoyed at the idea of it.
Is this boot available to purchase at an affordable price?
Under $700. Don’t think of it as disposable though. Also, ask your cpa depending on what you do for work.
I don't know man. I like the look of the boots. I just don't see myself hiking in them for days in a row, or sprinting from cover to cover.
My perfect apocalypse boot would probably be much lighter with a more flexible anti tracking sole.
I don't know too much about how well leather will last in a wet environment, but probably drain holes like jungle boots have would be a good idea.
That's my conundrum with boots as well. I like the well-built heavy construction of a lot of heritage style work boots, but they undoubtedly are heavy and do not handle consistently wet environments very well.
They are wear item's nothing will withstand the elements and wear as long as advertised.
Right, they look too clunky
Very interesting, thanks for sharing, subscribed! 👍
I think it would be really interesting if you made a follow up to this video, where you wear down the sole or don't put it on, to mimic the scenario of - it's post apocalypse, you've worn out the soles, and you have minimal tools and materials available, and try to attach a new sole made with basic tools / materials.
Perhaps a pine resin glue, using a tire for the sole as you said, etc.
Edit: I'm sure you could find a survival / bush craft expert that can make pine resin glue, and would love to try something like this.
The only problem with the Munson Last is that it isn't the healthy, natural shape of the human foot so it squishes your toes inward, causing all sorts of health problems down the line
Do you wanna delete your comment. Google is a thing ya know!😂
When it comes to boots it's much better than most any other last. Just get them in FF.
@@Infamousjr719 You can SEE that the comment is correct. No need to google.
🤦♂
@@TOKOLOSE Whose foot is shaped like that?
(Except the light brown detail) these boots are the most beautiful boots. The design aligns with the natural structure of the foot and the ankle,. They look brilliant
My black boots from Payless lasted me 9 years, worn almost everyday except 2 or 3 months in summer when I wore sandals but usually the boots. They were covered in holes by the time I threw them away
ND3 Sizing Guide - czcams.com/video/KmzQr6XdAuM/video.html
ND3 Unboxing Vid- czcams.com/video/IyNSub0CWgY/video.html
ND3 Sold Out, sign up for here to be notified when available - forms.gle/Q6osghGZ99WirJgb9
What did you do with the nd2.5? Can I buy the nd2.5?
This is on another topic but your comment on CZcams demonitizing your video made me remember this.
czcams.com/video/tI2d3pQlps4/video.html
It's done in a funny way but the message is very clear on what CZcams is doing/allowing. Get the word out to other content creators
Hey i love your videos and the content quality is insane! Can you PLEASE do a video on the YEEZY 500 ? They are the only one you have not done yet and the one i am most looking forward to. It is a suede/mesh upper and adiprene sole. They are releasing a boot version sometime this year, but for now there are low and high top versions. I would love watching that deconstruction. Keep up the great work !
Can you review the Rossi 4002 Mulga?
How about waterproof/ snow mud weather proof?!.
Or shock absorbing,cut
Limited ND3 Cancellation spots open now - bit.ly/47o82d9
I did not pull the trigger the first time… but did not hesitate the second
Can't buy then
Brother, we need more of these boots. I want to put them through their paces and show how durable they are.
How do I get a pair? Sound like I was too late.
why did it hurt so bad yet be so oddly satisfying to see a perfectly good boot cut in half?
I admit my heart broke when you did that first slice🥺