They Just Sent Us This! YesWelder FIRSTESS MP200 5-in-1 Welder & Cutter | Gooseneck Fabrication
Vložit
- čas přidán 12. 09. 2024
- Welding on our gooseneck with the yeswelder MP200.
Welder link: https-wwwkicks...
Hey, thanks for watching this video! We really do appreciate it! Since you just watched some short ads, we just made a few cents. Thank you for your support! You can also visit the links below to see various items we use around our homestead. Again, thank you!
Our Website----budgethomestea...
Litheli Power Tools-----
Chainsaw----amzn.to/2U3UsKJ
Leaf Blower---- amzn.to/3A7DBr1
Pole Saw----amzn.to/3vX6sKY
The tools we use!!!-------- amzn.to/2VNLSgy amzn.to/2VHPIIh amzn.to/3mPEs8z amzn.to/3oxlgwy amzn.to/37HHci0 amzn.to/37Bvcyq amzn.to/39Im6me
Water Filter System---- ebay.us/JINc8N ebay.us/jbrdwB ebay.us/IigceH ebay.us/nybPw8
Pumptech Pumpsaver----- amzn.to/2JIugk1
Our camera gear-------- amzn.to/39P60qL amzn.to/3qyicSK amzn.to/3lNa2CE amzn.to/2VIIyDB
Check out our EDC!!--------- amzn.to/3qvNnOG
Visit our Patreon page here- / laidbackliving
Follow us on Instagram!---- / laidbacklivingidaho
That’s a nice welder/plasma cutter!
Top of the line welder. Nice!
It actually failed horribly when put to grueling tests by another CZcams'er that did actual measured data testing. It's more like a bottom-of-the-barrel welder that's been hyped up. The video is on youtube by bigtb1717
Awesome multi purpose machine.
I'm a backer for yeswelder. I can't wait for it to come...
...lookin' good, should get 'er done, have a great weekend..
Angle Iron is alway nice for this type of location. Negates the need for gussets. Neat little all in one welder👍🏻
nice job mike, you look comfortable welding, that seam you showed on close up looks very good, no undercut, you must have experience welding.
Love your channel. Careful when welding around dogs. They will stare at light and cause damage to there eye sight.
Good advice. A welding flash is so painful. Make a couple of welding screens to protect anyone who may be around you while welding.
Was going to mention that. Arc spatter too.
So is starring at the sun, how many dogs have you seen staring at the sun??
Total package welder setup there. Plasma cutter, mig, and stick, way cool. Thanks for sharing
It is cool, thank you!
A nice little project guys, just the right stuff to put this welder to the test.
Glad to see someone get some good use out of this cheep welder! Thanks you would have like to see you run some flux core duel shield thru that machine maybe in the future?
That slick wire will do ok on them ramps ...Long as you just gonna Load Hope's An Dreams....!!!
Nice vertical beads...looks like you could just shroud the top half of the brackets with some flat iron from one end to the other and follow the angle down until your ramp butts up against it at the angle you want. That would also give a final step on to the trailer instead of driving over the pins at the end. Nice work and love that welder/cutter.
That looks great you guys. I have a similar welder/plasma cutter I bought from Amazon called a Primeweld CT 520d that is almost identical to the YES welder you are using. I have cut 1/2" steel (a bit of a struggle with it and probably the maximum thickness I would try) with it. Mine is a 120V-220V as well. Mike, next time start by making smaller welds come in from where you have tack welded to eliminate the warping of your material. I know it slows down a bit but, the end result is a straight weld. I think that your welds look terrific!
You should use 70/18 in some places
Great job. Love the channI am a subscribr. Keep it up guys.
Liz...Is that You..? Remember that time in New Orleans...!! Crazy Times..! The Hurricane 🌀...I was taking about the Hurricane 🌀.. It was on the news ..I'm sure u heard about it....Crazy Times huh..!!
If you want the ramps to stand up straight, weld pins on the side of the trailer and ramps.
Then cut straps out of 1/2-3/4 metal to hold ramps up straight using locking pins to hold straps on to ramps. Hope that helps.
Sweet welder very impressed, glad you decided to wear boots and not your work flip flops lol!!!
Nice project. Hopefully the slight height difference between the top of each ramp to the top of the trailer deck won't be much of a hindrance to loading wheeled things.
I have heard some really good things about this welder as it does the hard part of figuring out what settings to use. I am glad that your picked as one of the people for reviewing this welder. That is no toy, its serious business and does as good a job as the other brands... on a tottle different , you all need rain in the worst way so start stepping on spiders, painting outside, leaving the tool box open outside, what ever it takes to get some serious rain. There is going to be some serious timber sales after this is over if there are anyone left to do some logging. No more poison ivy or other narly weeds but its nice to still have a neighbor when it does quit. With this welder you should build yourself a welder. Nice ramps for the trailer but way overkill. I would take a drive to different trailer sales places and see what other trailers offer. I sure hope you guys miss this burn for sure kids
Look good just saying
Well, that worked out well. Nice work!
I hope you have a drone so you can scope out for fires!
Well I learn something each time I watch your video! Cool little machine! Thanks for sharing..I am concerned about that smoke. Hope it stays away! Suppose to rain heavy here. Tropical Storm Fred. Should have some stuff to share with you after it passes..Megalodon time..:-)
Rick From Virginia
Hopefully the season of smoke will be gone soon, thanks Rick take care!!
Nice trailer. I just realized our 18’ equipment trailer is not long enough. I’d like a Goose neck. Doesn’t make much sense to have one on a 250 though. Good video.
Really nice.
Honestly, Mike, Liz, would you recommend this welder? I am looking for one so your honesty opinion matters. By the way love watching you episodes.
What, no flip flops? Sweet welder, good test.
Actually now that I look at it some angle iron welded on where your trailer reflectors are inside the brackets just above the pins would work even better...now I want to do a welding project!..LOL
My man here likes to weld in sandals. Lmao. Machine sounds good, nice spray on the plasma, and the welds have a decent crackle. Could have turned your heat up, or wire down little. Nice try with the stinger...
Nice welds bead… You’re pretty handy at welding you obviously have welded before or it it just that good of a machine it makes welding that easy. I’ve only brazed with oxy acetylene.
yes cool machine
Buy American if you want a job..
No rest for the weary, the Honeymoon is over, back to work. I love watching your homestead adventures. You should get some great use out of that welder/cutter. Don't work too hard.
We think so too. Thanks Jack!
Is this the first time welding or have you been taught in the past?
Just so you know dogs get flash burn in there eyes from welding just like people I found out the hard way
Photokeratitis is the medical term for a flash, I have had it about a dozen times duringy working life. Always extremely painful, feels like you have a bucket of sand in your eyes and they burn so bad. Certainly would be very unpleasant for a dog. Always think of others and keep them all safe.
Awesome job! Sorry it took me so long to get here, watching the wedding preparations wore me out...😅
any updates on the welder? u still like it?
Are we ever going to see blue sky's this summer?.Hi from Colorado Springs.😀
A word of caution there kids.... PLEASE PLEASE PLEASE build a welding shed!
If that sawdust on the floor catches fire, your building will burn to the ground in a heartbeat!
All it takes is a spark to roll behind something, and its ALL gone in minutes. PLEASE use better judgement with your plasma cutter and welding.
The support legs on the ramps should be much shorter because when the equipment is driven up the ramp the weight will bring the rear of the trailer down ... Having them long like that will just make using the ramps a hassle ...
Great! What technique do you use to weld uphill?
Not with hardwire
🥳🥳🥳🥳🥳💖💖💖💖💖👍👍👍👍👍
Should just get an everlast
Plasma cutter is too sick
H is for Hyperthem......
Feel sorry for the poor DOG... suffering big time from weld flash in the eyes.
I really need to know where you bought the t-shirt with the growing wine glass on it? 😎
Etsy! You just have to search tulip glass shirt
@@LaidBackLiving Thank you, I’m not sure if my wife is better at gardening or drinking wine (she’s very good at both) so I know she will love that t-shirt!
Your wife sounds great!
I bought the 205 ds in January I hate mig welding but it’s useful for just get it done projects but the auto settings on these machines are a bit annoying you could do better just adjusting the dial over all they are fine for the price I usually just use the hf tig on mine. I am an aerospace and military sub contractor I will tell you if you want to do any type of production runs these machines won’t cut it. It really only gets a pass because it’s soooo damn cheap but honestly IF you are buying this for tig save your money and get an alpha tig a primeweld or an everlast.
Buy American made machines and keep the jobs local..
What's the name of that corded angle grinder?
Watch your channel all the time, where do you get the money to do everything? you are not working?
I would just cut it off and try again
Yeswelder sales men said should last 4 years and he didn't no anything about the internals I no my everlast and 4 others have lasted there like day one still 5 years old
Get a grinder, save yourself a lot of trouble.
Might want to Clean up the sawdust in the area before Welding, Since you do not want to build this place again.
why didn't you welded the eyes complete ? now it's going to tear off where it wasn't welded
Y'all need to be mindful of your dogs. There not smart enough to not look into the light and the welding light will hurt them just like it'll hurt or blind you.
Are you guys not taking a week off from CZcams?
You need a honeymoon.