This video shows you 2 methods of how to repair OnePlus 6T broken Screen. Get OEM Replacement Parts for OnePlus 6T : witrigs.com/d7oeb OEM Screen for OnePlus 6T :zegsu.com/s/di59s
After a little swim in the water, I've disasemble the phone, dryied it, then reassemble. Phone is back to life but touchscreen is not responding. What should I target first, the screen or the motherboard or the connecting cable ?
Well explained, thanks for the Video. Can I use the replacement screen from OP6T for my OP7 (not the OP7Pro) too? They are identically from the outside as far as I know. Found one Teardown for OP7 and can't say if the flex from the display is identically to the one from OP6T.
I replaced the screen. It works fine most of the time but ghost touches and dead spots come up after a few days. But restarting the device 3-4 times fixes the issue. Can i try replacing the screen again or it could be something else at fault here?
Hi , only the front (gorilla)glass is broken , rest is fine like digitiser , can perform all the functions Is it possible to replace only the front glass ? Kindly reply
This will never so easy how shown - forget it. When you say "apply alcohol", you should tell the people how much and how in detail. The adhesive is so strong, it could survive ten wars. And how you lift the screen (without the frame) with the plastic sucker is never that easy :)
It does work! I tried this on my OnePlus 6. I put much more alcohol than shown in the video using a cotton Q-tip. I quickly saw a white powder form at the edge of the screen (must have been a chemical reaction between the alcohol and the glue), and after a few minutes it was not too hard to remove. I would not do it on a working screen because I doubt you could remove it without damaging the screen.
do you guys offer shipping to india and does the oem screen with housing has oleophobic coating respond asap ill order and whats the 6T MCLAREN EDITION FRAME COLOUR
I am using the frame method. The replacement frame I received does not have the buttons (power, volume, slider). How do i take them out of the old one? This video doesn't show those parts ...
I successfully replaced my screen following this video! But now the fingerprint scanner isnt working anymore. I mounted it, as it was mounted on the old screen before. It recognizes touch and reads new data - sort of. (When i add a new fingerprint) But it never detects an added Fingerprint :c Is there a way to test, or maybe recalibrate it? At the moment the battery cover of my oneplus is hold in place with a case, so i dont have to reopen it for the fingerprint scanner replacement (if need to). Much thanks :o
I dropped my phone. now the display shows nothing (it is black) but the touch is working (I tested it by using gestures and trying to pick up a call ) so should I replace the whole screen or is any connection loose.
Hey i really Like your Video! Ist there a good way to seperate the Screen from the housing without damaging it (the Screen). I want to replace the Metal housing only.
does the screen with frame that you guys sell comes with the light sensor?, i need a screen + a light sensor to repair my OP6T. is the OP6T Light Sensor the same the OP6 uses?.
@@EricWitrigs do you now include the light sensor in Screen+Frame? I ordered "OEM Screen Replacement with Frame for OnePlus 6T Midnight Black" and wondering if it comes with the light sensor.
when the screen is on I can see a little sircled shape where the sreen is a little bit lighter where the fingerprint scanner is, mine is going to be like that?
I'm not understanding how you applied the alcohol? when watching this it just looks like you glided a stick or something over the edge of the phone without touching it. can you explain how and what you were doing to apply the alcohol? Also how to apply the adhesive? the yellow marks show where to apply, i see to lines in the middle and a thinner line around the edge of the phone is that correct? and how much adhesive do you put on? How long does it take to dry? Do you use the same adhesive to paste the battery cover? how much adhesive goes on that part? Or is there a adhesive that has pre-applied amount?
This video shows you 2 methods of how to repair OnePlus 6T broken Screen.
Get OEM Replacement Parts for OnePlus 6T : witrigs.com/d7oeb
OEM Screen for OnePlus 6T :zegsu.com/s/di59s
Thank you for this video. I have recovered several thousand photos and hundreds of videos. I'm so grateful 🙏🏾
The greatest value of video is that it helps people.
Thanks a lot for this comprehensive tutorial. It really helped to install my screen, frame and flex connector cables.
Hi, where did you order the screen? I have same situation.
@@Indichoora witrigs is the name of the site I ordered from. Make sure u select OEM parts so they will be high quality replacement parts.
Very helpful, I am able to replace my screen by following this video, thanks a lot!
This video was wildly helpful! Thank you
This video is amazing, thank you!
Thank you saved $120 by following your video!
This is a step-by-step video and very helpful. I give you a thumb up. Thank you
After a little swim in the water, I've disasemble the phone, dryied it, then reassemble. Phone is back to life but touchscreen is not responding. What should I target first, the screen or the motherboard or the connecting cable ?
Hello! Thank you!! But my proximity sensor isn’t working after replacing the screen! Do you know how to fix it?
Is the same process for the 6t McLaren edition
thank you for this awesome video, just can you tell us how we can find online this fish shape sheet ??
Here www.witrigs.com/001-fish-shape-opening-pick-silver
@@EricWitrigs any shipping for India?
Faisal khan did you buy from him?
Well explained, thanks for the Video.
Can I use the replacement screen from OP6T for my OP7 (not the OP7Pro) too? They are identically from the outside as far as I know. Found one Teardown for OP7 and can't say if the flex from the display is identically to the one from OP6T.
No, they have different flex cables.
What is the price of original display combo?
Excelent work. You Save me. Tanks
I replaced the screen.
It works fine most of the time but ghost touches and dead spots come up after a few days.
But restarting the device 3-4 times fixes the issue.
Can i try replacing the screen again or it could be something else at fault here?
Can you help me. My 1+ 6t display is black after water damage
But i have no money
Hi , only the front (gorilla)glass is broken , rest is fine like digitiser , can perform all the functions
Is it possible to replace only the front glass ?
Kindly reply
where can I find that specialized screen adhesive??
nice work . thanks for share
seeing this, I prefer buy a new smartphone. Thnks for the tip
This will never so easy how shown - forget it. When you say "apply alcohol", you should tell the people how much and how in detail. The adhesive is so strong, it could survive ten wars. And how you lift the screen (without the frame) with the plastic sucker is never that easy :)
It does work! I tried this on my OnePlus 6. I put much more alcohol than shown in the video using a cotton Q-tip. I quickly saw a white powder form at the edge of the screen (must have been a chemical reaction between the alcohol and the glue), and after a few minutes it was not too hard to remove.
I would not do it on a working screen because I doubt you could remove it without damaging the screen.
احسنتم بارك الله فيكم ما اجمل مشاهدت افلامكم
Do you have a discount code i could use?
Do you need to buy a new screen replacement with a frame or not....?!?!
Thank You very much!
do you guys offer shipping to india and does the oem screen with housing has oleophobic coating respond asap ill order and whats the 6T MCLAREN EDITION FRAME COLOUR
I am using the frame method. The replacement frame I received does not have the buttons (power, volume, slider). How do i take them out of the old one? This video doesn't show those parts ...
is it the same with the mclaren edition ?
I successfully replaced my screen following this video!
But now the fingerprint scanner isnt working anymore. I mounted it, as it was mounted on the old screen before. It recognizes touch and reads new data - sort of. (When i add a new fingerprint) But it never detects an added Fingerprint :c Is there a way to test, or maybe recalibrate it?
At the moment the battery cover of my oneplus is hold in place with a case, so i dont have to reopen it for the fingerprint scanner replacement (if need to).
Much thanks :o
For me also. Pls give a solution
@@vignesh9066 I Just tightened the Screws Holding the Fingerprint Scanner and it worked again! Hope ist helps!
@@vignesh9066 did you solve the problem with finergprint and how? thx
@@uaredark15 how is your screen now? is it working ok after replacement. where did you buy it and is it original? thx
@@TheFriendly92 no. I just go to service centre & they are calibrate the finger print sensor finally its works
Where can I get a replacement screen? The link you shared is out of stock
This is also good. The quality of this one is credible. www.witrigs.com/custom-screen-replacement-for-oneplus-6t-black
I dropped my phone. now the display shows nothing (it is black) but the touch is working (I tested it by using gestures and trying to pick up a call ) so should I replace the whole screen or is any connection loose.
Hi, when you buy the OEM screen replacement with frames from your website, does it also come with that black sticker @ 8:54?
Hello. You can get cover sticker here: www.witrigs.com/oem-back-cover-adhesive-for-oneplus-6t
Hey i really Like your Video! Ist there a good way to seperate the Screen from the housing without damaging it (the Screen). I want to replace the Metal housing only.
Risky. I succeed to do that, but feel very difficult.
@@EricWitrigs Too Bad... But thanks !
5:47 c'est quoi le nom de se composent ? svp
Will you need to factory setting the phone after replacing the screen?
No need.
The back of screen looks like graphite sheet yes?
how much cost screen display
does the screen with frame that you guys sell comes with the light sensor?, i need a screen + a light sensor to repair my OP6T. is the OP6T Light Sensor the same the OP6 uses?.
Not the same as OP6. The light sensor is still in short recently.
@@EricWitrigs do you now include the light sensor in Screen+Frame?
I ordered "OEM Screen Replacement with Frame for OnePlus 6T Midnight Black" and wondering if it comes with the light sensor.
what is fish-sharp iron sheet 😭 I'm stuck at that step. Could not make it
I want to repair my OnePlus 6t Screen last night a fellow mate broke it can u help me fix it ? How Do i contact you ?
You can go directly to our website
www.witrigs.com
when the screen is on I can see a little sircled shape where the sreen is a little bit lighter where the fingerprint scanner is, mine is going to be like that?
That is only when he back cover isnt on
Good
Will the waterproof continue to work after the easy replacement?
I wouldnt rely on it since you are reaplying the adhesive
Yeah but b7000 is waterproof, right?
Good work !!👌What ...about the (vivo nex s )phone..!?
What to do if the fingerprint scaner dosent work after puting on the new screen??????
Reset or go to the repair shop solve this problem.
Hi, you can tell me any Samsung device's screen can fit for OnePlus 6t?? As OnePlus displays aren't available in my country
what kind of alkohol are you using?
Pure alcohol
Which is better lcd AMOLED or OEM?
OEM is mean "Original", AMOLED is type of screen. the OEM screen for oneplus 6T is AMOLED display.
Wit Rigs how can i buy those screen sir? Cause i broke the screen of my OnePlus 6t
How much
www.witrigs.com
My fingerprint is not reading after I changed the display pls help anybody
Price ??
I did the 1st method, it worked, but now m'y phone dosn't charge... It's fake charging, staying at 0% or 1%...
WAW!!!!
Oneplus 6T finger print replacement
Hi does anyone know if I Will lose all my photos and videos that are saved to the phone.
Data will not lose.
Is it can be waterproof still?
It doesnt even have an ip rating so no its not any more waterproof. Oh and Yeah you will lose your garantee🙄
@@keannoah6578 I'm bathing with this monster,i wash it when it's oily and no problem 😉
Oneplus 6t only front glass change can u fix it
Replacing the front glass requires professional technicians, don't replace it yourself if you haven't replaced it
Easier than iPhone se
My screen got a bump and broken on the lower right part. Where can I fix it. (seeking help from Bangladesh 🇧🇩)
You can buy a new screen www.witrigs.com/custom-screen-replacement-for-oneplus-6t-black
Same did mine. Trash screen
I'm not understanding how you applied the alcohol?
when watching this it just looks like you glided a stick or something over the edge of the phone without touching it.
can you explain how and what you were doing to apply the alcohol?
Also how to apply the adhesive? the yellow marks show where to apply, i see to lines in the middle and a thinner line around the edge of the phone is that correct?
and how much adhesive do you put on?
How long does it take to dry?
Do you use the same adhesive to paste the battery cover?
how much adhesive goes on that part?
Or is there a adhesive that has pre-applied amount?
I dip the alcohol with a stick and apply alcohol onto the screen edges.
My usb c cable is stuck does anyone know how to fix it 😧
Usb port*
Oneplus 6t ka fingerprint Kahan milega
why did my screen fail the test? and what does that mean?
First confirm whether the cable is connected.
wow way easier the the op6
Also for Oneplus 6 czcams.com/video/PVXafwzSuvU/video.html
Tough
bhai yaar mera b phone ke screen thek kar de jammu se hu mai
Im second
one year with the phone and already causing problems.. Its laughable..
Mera phone chat se girgaya
3rd
Awesome