@@istolethispfpsorry485 normally,I buy it from “mohair bear making supplies” because you got a lot of choice,it’s not so expensive (in my opinion,compared to other places) and some fur are really really soft 😊
@@Paskasauruss I am not a professional,I have only used this website one or twice (so don’t use me as an exemple,I recommend you make your own recherches) but the times I used it,I haven’t got any problems and all the fur arrived in less than a month(but that may change depending on where you live)🤔(btw,sry if I sound mean or if my English is bad,I’m french and not the best with different languages)
not sure if anyone gives a damn but if you're stoned like me atm then you can watch pretty much all the latest movies and series on instaflixxer. Have been binge watching with my gf for the last months :)
This is the first time I've ever heard of you and just wanted to say that is definitely the best made tail I have ever seen! I like big and poofy tails and that is just perfection! Excellent work and good luck in your future works!😸👍
Definitely 🥰 looking forward to this. I have no idea what to use to make protogen legs. No sure if it's all fur or some plastic or metal. I'm so confused 🤔.
I don't really use this to make but it is nice to know how it will look and is made. Also this is probably really weird to ask but could you make a video on insect fursonas (Cus I am wanting a moth fursuit but don't know what it would look like- basically how to make a extra set of movable arms)
So I've been thinking of making my fursona but her tail is super long and I don't really want a floor dragger tail as it would get super messy. Any suggestions? If you need a reference sheet of her to know what I'm talking about I have one.
You could just have the tail be a “super motion tail”, but that that type is made out of foam instead of polyfill, I made a 4 ft shark tail that was super motion, (well the tutorial I followed for neffertity’s tutorial on CZcams)
@@Cerafloofs Alright, her tail is like super long, I could make it slightly shorter or just deal with the dirt anyways. Edit: I just got out my measuring tape, 36 inches should be long enough and not too heavy for it to stick out
@@NX1984 yea, (you don’t have to shorten it, it could be like abt a few inches of the ground, just have it curl near the end, or make a plastic vinyl case for the end of the tail (this works better with tails that have feathers at the end of it).
hello! I have a question, could you make a pdf pattern on Etsy for a fursuit dragon head? the closest thing I can find on your Etsy is the angel dutch dragon. please and thanks!!
I have been working on designing a protogen suit of my sona, Bronco. I have been thinking about the tail design and I was wondering if you know of any tutorials or tricks for working with fur and another material like vynal, the tail design is fur on top with a scale like underside? I have been working on a head from your eva foam tutorial.
I would pin it very well to make sure the vinyl/minky underside will not stretch or shift around while sewing! to make the scale look underneath i would just sew horizontal lines across the vinyl
![[HOW TO MAKE] Super Motion Canine Tails](http://i.ytimg.com/vi/vFkfsAU17KQ/mqdefault.jpg)
![[HOW TO MAKE] SUPER-MOTION FELINE TAILS](/img/n.gif)
Woah Yesss! A suggestion would be an opossum / rat tail! They seem pretty hard to find tutorials for!!
I already have a video about that
I’m totally gonna make this when I get my fur in the mail,thx for the tutorial,love your vids ♥️
I'm curious. Where did you order your fur?
@@istolethispfpsorry485 normally,I buy it from “mohair bear making supplies” because you got a lot of choice,it’s not so expensive (in my opinion,compared to other places) and some fur are really really soft 😊
@@Peytur could you tell me about your experience with the company? I have heard horror stories of it so im a little skeptical
@@Paskasauruss I am not a professional,I have only used this website one or twice (so don’t use me as an exemple,I recommend you make your own recherches) but the times I used it,I haven’t got any problems and all the fur arrived in less than a month(but that may change depending on where you live)🤔(btw,sry if I sound mean or if my English is bad,I’m french and not the best with different languages)
not sure if anyone gives a damn but if you're stoned like me atm then you can watch pretty much all the latest movies and series on instaflixxer. Have been binge watching with my gf for the last months :)
This is the first time I've ever heard of you and just wanted to say that is definitely the best made tail I have ever seen! I like big and poofy tails and that is just perfection! Excellent work and good luck in your future works!😸👍
Wow @mugiwara cosplay you have done it again with an amazing tutorial and I can't wait to see the full suit💚🔥🔥
Huh...
Seems like a missed a couple of vids lol
Very neat design by the way
TO BE CONTINUED...
Definitely using this during the summer, thanks!!
That's a thicc tail with pretty colors! A lot different from a tiny tech nub like mine
I just made it like on my ref sheet and vrchat avatar xD
Definitely 🥰 looking forward to this. I have no idea what to use to make protogen legs. No sure if it's all fur or some plastic or metal. I'm so confused 🤔.
Wow that’s a big tail.
In awe at the size of this lad
Thank you, new subscriber here, plus this is gonna be my future art making :D
Elle est magnifique et super tutoriel^^
J'adord se sue tu fait^^
Can't wait to see it finished 😁
WOOO i luv big floofi tails :3
Good work👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Ain’t a furry but if I’m honest fur suits are pretty cool in my opinion!
Hey just found your channel, and as soon as I heard you speak I knew you were from Denmark (me too btw)
How much fur, in inches, was used? Also, how long was the zipper in the video?
YES
I don't really use this to make but it is nice to know how it will look and is made. Also this is probably really weird to ask but could you make a video on insect fursonas (Cus I am wanting a moth fursuit but don't know what it would look like- basically how to make a extra set of movable arms)
This is sooooo t h i c c
Wow
Yez! Another amazing video! I love your'e contant, keep up the good stuff!❤️🐾💚
So I've been thinking of making my fursona but her tail is super long and I don't really want a floor dragger tail as it would get super messy. Any suggestions? If you need a reference sheet of her to know what I'm talking about I have one.
You could just have the tail be a “super motion tail”, but that that type is made out of foam instead of polyfill, I made a 4 ft shark tail that was super motion, (well the tutorial I followed for neffertity’s tutorial on CZcams)
@@Cerafloofs Alright, her tail is like super long, I could make it slightly shorter or just deal with the dirt anyways.
Edit: I just got out my measuring tape, 36 inches should be long enough and not too heavy for it to stick out
@@NX1984 yea, (you don’t have to shorten it, it could be like abt a few inches of the ground, just have it curl near the end, or make a plastic vinyl case for the end of the tail (this works better with tails that have feathers at the end of it).
@@Cerafloofs Awesome! She has a tuft at the end so thank you so much!
Wow ty :D
Adorable!
wow
is it better to mirror the pattern or to use the small triangles like that? just curious thank you!!
Can I be creative and use rapping paper as a base pattern
👍
WAIT, Also can you make an turtoral or f where you find all the materials for the protogen fursuit? I hope you can, Ty ^^
They are linked in the video descriptions
@@MugiwaraCosplay thank you :D
OWO nice
can you do a skunk tail tutorial? is that my fursona is a skunk
good job!!!!!
hello! I have a question, could you make a pdf pattern on Etsy for a fursuit dragon head? the closest thing I can find on your Etsy is the angel dutch dragon. please and thanks!!
Maybe some time in the future
😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍 soooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo gggrrreeeaaatt😻😻😻😻
I have been working on designing a protogen suit of my sona, Bronco. I have been thinking about the tail design and I was wondering if you know of any tutorials or tricks for working with fur and another material like vynal, the tail design is fur on top with a scale like underside? I have been working on a head from your eva foam tutorial.
I would pin it very well to make sure the vinyl/minky underside will not stretch or shift around while sewing! to make the scale look underneath i would just sew horizontal lines across the vinyl
😍
Also omg that’s a lot of scissors
Thats we call FICK BOI
??
POV I use this pattern for a cat tail
pogs
??
@@MugiwaraCosplay Technically means "play of game," but people often use it as a way to say they're excited about something. Hope that helps.
@@MugiwaraCosplay u pogchamp
Oh xD this is the first time I hear about it
@@MugiwaraCosplay thats ok because now you're in on the meme
No
If you don't like it then don't click on the video and just ignore it...
Yes