Yamaha Vino 125 Emission (EVAP) System Removal! | Mitch's Scooter Stuff
Vložit
- čas přidán 13. 09. 2024
- In this video I am going to show you how to remove whole emission system ( EVAP ) on Yamaha Vino 125cc scooter to get better acceleration and add 4-5 mph more!
Subscribe and help me break 100K subscribers! bit.ly/MitchsSc...
*** Tools I used in this video:
Phillips #2 screwdriver - amzn.to/2fgdZDL
Ratchet 3/8 drive - amzn.to/2hhmnUs
3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl
10mm socket 3/8 drive - amzn.to/2xGuLSF
5mm allen socket 3/8 drive - amzn.to/2ofCuCg
7mm socket 3/8 drive - amzn.to/3qccRjs
Nose pliers - amzn.to/2yetDDj
Vacuum caps - amzn.to/3tPn3k4
Scissor - amzn.to/2pIY56w
Axle bolt size 1/2" x 1-5/8"
Shop Mitch's Scooter Stuff Logo Merchandise
HERE: bit.ly/MSStees...
and HERE: bit.ly/MSSspre...
Want more free Scooter Tip / Tutorial videos - Help support this channel!
Paypal donation: bit.ly/PayPalMi...
** Help translate my videos to your language HERE **
bit.ly/ADDYOURL...
** Shop all the scooter tools and gear I use HERE **
bit.ly/MitchsSc...
*** Need help with your scooter? I offer memberships to chat with me directly from anywhere in the world! TEXT +1 808 - 201 - 7191
Or click this link: bit.ly/ASKMIC
Follow Mitch's Scooter Stuff:
Website - bit.ly/Scooteronly
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
My other CZcams channel - bit.ly/2g4i5d5
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
#MitchsScooterStuffYamahaVino125 #MitchsScooterStuff #MicBergsma
Like the music? Check out this great library for CZcams videos here:
bit.ly/MICTUNES (try it for FREE!)
******************************************************
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact: hire.micbergsma@gmail.com
******************************************************
About Mitch's Scooter Stuff:
This channel is all about scooters! Tutorials, How to, DIY Maintenance, Reviews, Mods, Vlogs, Just for Fun, and more!
Yamaha Vino 125 Emission (EVAP) System Removal! | Mitch's Scooter Stuff
• Yamaha Vino 125 Emissi...
Mitch's Scooter Stuff
/ mitchsscooterstuff
Thanks Mitch, I bought a Vino that had a misfire and cut out from time to time. After watching you're video I followed the procedure and now no issue at all.
Right on Andy! Ride safe 🤙🏼
Just got a Vino 125 and Mitch’s videos have been excellent!!! I had trouble reinstalling my exhaust because it was damaged from a previous wreck. I hammered and pried it the extra 5mm it needed to line back up with the mounting points on the block, because I can’t afford 200-400 for a replacement exhaust. I’m quite satisfied with the results from removing the emissions system. The acceleration is much more linear. Before there was a noticeable hesitation at around 10-30mph, but now it’s nice and smooth 👍👍
I removed the emission from my 2008 Vino (this after I installed Dr. Pulley sliders). Mitch rocks. Good instructions. Quieter, faster, Speed Racer. We're still not polluting as much as the Koch Brothers. Minimal I'd say. Good stuff. Thanks.
Just got a '08 Yamaha Vino 125, what a fast little scooter, 55 mph and I weigh 220, it pulls like a dirt bike;) life is good!!!!!!!
I’ve looked over the emissions system and don’t see anything that would limit power other than perhaps the catalytic muffler restricting flow. Only reason I can see for the performance increase was perhaps the carb pulling more fuel with the vacuum hoses capped off. A larger jet in the carb would probably achieve the same result. A free flowing muffler and carb rejet would probably be the easiest engine upgrade for more power. And of course variator tuning can really improve a bike for your riding conditions, ie flat or hilly. A windshield can give a couple more mph on the top end as well.
After thinking on it some more, maybe the EGR could reduce performance a bit. I might try pinching it off and see if it makes any difference…
Welp, i know what im doing tomorrow. Thanks mitch! Always keeping me busy on my new projects!
You got this!
The side cover mounted turn signals are awesome! Can I get those in the states?
Always happy to see the Vino in action.
Awesome 😄🤙🏼 I will do more!
hello, great video. any tip on how derestrict Vino 125cc without adding parts?
Wiw big up for you man you are the best in fixing
All the love from Tunisia 🇹🇳
Thanks for the informative video... mine had a rough high idle and this mod fixed it. Im sure it was sucking air somewhere from unnecessary hoses, so thanks!
Welcome!
Nice Mitch! I’ve been wondering if it would perform the same and looks like it’s slightly better !
😎🤙🏼🤙🏼
Very clever to film the reassembly during the disassembly. 👍
😎👍🏼👍🏼
Thank you for sharing Mitch. Great step by step instructional video. My next project definitely.. with my oil change
You’re welcome!
Nice tutorial. Good use of the bolt for a block off plug.
Thanks Paul 👍🏼
Thank you again your videos have inspired my life I know dont trust any one with spanners near my soxxter but me u have showed me the way and its the best way do it your self and then you know its dune right love you alway and forever my scooter purrs because of you x
You’re welcome! I am so happy to help and this comment made my day!! Ride safe 🙏🏼
U give me relaxing Vibes
😎👍🏼👍🏼
Do you need to re-jet at all after this?
Hey Mitch . I really enjoy the simplicity of your videos. I recently bought two Vino 125's and have used your videos as I go through them. Do you happen to know any forums that are active on this bike? I guess there used to be a yahoo group that had lots of threads and pertinent info on the vino 125, but they shut that forum down. Anyway, keep up the good work!
Chance are you can find a group on Facebook.
Thank you Clay! Yes there is a group for vino on Facebook like untip said 👍🏼👍🏼 awesome on getting two vinos!
Sweet graphics in that scoot!
Thank you 😄👍🏼
Won’t these instructions work for the zYamaha Vino 125 also?
When I removed the vacuum line from the part you labeled to “just leave there” the whole thing popped apart and pieces fell out, i think I put it back together correctly but does anyone know what that part is? I figured it’s a breather valve or something, can I just remove the whole thing? It appears to just lead to the gas tank.
Aloha Mitch, say...my vacuum plug kit has a plug big enough to cover the axel bolt plug location. Can I use the rubber or is it heat related that you use the metal plug, then rubber? Thanks, and have a great week
I've had my stock vino125 up to 61mph GPS verified but I have trouble with warm starts and I think it's the emission
What app do you use to verify the mph?
@@GentleSerpent Google maps and a Garmin
Hey Mitch! Great videos, I just recently purchased a 2007 Vino 125. I have such a headache looking for 3 pieces you have on your Vino. The taillight and the two rear turn signals. Could you post or write where I can go to purchase a set for me, please?
great to see you riding, loved the end of the video, thanks for sharing
😎👍🏼👍🏼 I will get some more riding videos
@@MitchsScooterStuff you're the best !
I removed everything but the air pipe and capped it off by the muffler no heat issues
great video do scooters get smog tested in Hawaii?
is it legal to remove the whole system? benifits and will removing this will destroy the engine?
Just depend on where you live... where I live do not require emission test so it’s fine to remove... no it will not hurt then engine... it’s just hot air blowing around...
It runs so much better on acceleration and little more power, gained 4-5 top speed mph
@@MitchsScooterStuff thanks , take care
Thank you for you videos ,,,I have 150cc chinese scooter, running great, new carb, I decided to do an upgrade and add a uni intake, I used a custom raidiator hose to fit under the frame,and remove some emisions, and stock airbox, I changed main jet from 103 to 108 and no matter where I move the idle or mixture screw, it starts, then just dies and after 30 secs no warning, it gets very boggy on throttle and when I took it down the street it was not as fast and was a bit "chuggy" and "bucky" this happened with 100, 105 and 125 main jet, the vaccum hose from the manifold is connected the same and the PCV and the other emisions vent that were going into the old air box are just vented into the air and zip tied to the frame, do have any idea what happened? The scooter was running great before I did a few things, could it be the needle? what do you think?
ciao bravissimo come al solito ti seguo in ogni tuo lavoro
Hi Mitch
I follow you from France.
I like your videos .... Keep it up ....
Well done.
😎🙌🏼
very detailed video braddah, thank you
hey man have you ever had any problems with your cdi box in the yamaha vino?
Hey Mitch. I’m missing a bolt that attached the exhaust from the engine. Do you happen to know what size it is ? And where I could find one ? Cause I don’t want to crack the engine with a different size bolt.
I can still see Emission System in its place???Why did you return it
Do not give up ♥️
😎🙏🏼🙌🏼
Hey Mitch make a video of conversion gas to electric moped please!!! 🙏
What year is that Yamaha? I'm working on my 1993 Yamaha Riva 125 and only had some emissions I removed when I changed my Carb. It's 5 degrees outside today so I won't get back to it till April. Cool videos and I looking for more.
It's 2006. That's awesome, dang that's cold!!! Looking forward to hear from you when you ride it again :) Thank you! A ton more videos coming!
Just stripped down my Vino and realized I’m missing most of the screws holding on paneling haha 😅
Right On Mitch.
Thanks Chris!
I need plastic for 1984 elite 125 do you have a place you know of to get parts
What WT size Rollers do you recommend?
I did not know that model but not only does it limit the final speed, but it also has less acceleration .. Greetings from Argentina
Less acceleration? Oh no... when I got emission system removed... the acceleration is sooooo much better.... it is awake up 😎
@@MitchsScooterStuff I meant that before making the modification I had less acceleration, excuse my English
nice video, thanks Mitch
🙏🏼🙏🏼
need to find a turbo for the vino haha vroom vroom
Haha that would be fun!
is it more realible when removing that system more power more good? .
Yes it is, now not just blowing the hot air around, I did on Vespas and Piaggios for years too
Hello ,Mitch! I like your Stuff. Please ,tell me ,who is videotaping during master?
Aloha thanks! I filmed all myself
@@MitchsScooterStuff It's cool! what kind of camera do you use ?
you get great camera angles! what are you installing the camera on?
HELP! I was about to clean my V-Belt filter and when I took off the first shield I found a tube that is dangling and looks like it should be hooked to something. I wish I could send you a picture here. URGH I've been having issues with only being able to go 22 mph and then very, very slowly climbing to that.
Hi Diana, that should be ok, there are some tubes that are just hanging without plugging to something... they are for breathing ... Wow 22 mph? On your Vino 125? Sounds like you have bad rollers and need to replace.... I have CVT parts replacement video... check it out
great bro!!!!
I ordered a generic fuel tank to replace my rusty nonrepairable one and it doesnt have a port for the evap line. Will it run fine if I delete the app cap system only?
Hey Toasty. I bought a Vino 125 with no fuel tank. I can not find one new or used. Were you successful using your generic tank? Did it work without the EVAP system? And finally, which generic tank did you buy?
Thank you in advance, Sam.
@@samgrissom7274 The one I purchased is called Trkimal Metal Gas Fuel Petrol Tank for 50cc 70cc 90cc 110cc 125cc Roketa Taotao Sunl Coolster JCL ATA Baja MotorsportsVitacci BMS Buyang Coolsport Eagle Peace kazuma ATV Quad (Metal-B)
on Amazon. It's made for a ATV/Go Kart but will slightly fit by using scrap pieces of flat steel/aluminum as brackets to center the tank close to the chrome housing. I got the filler neck to partially line up with the chrome housing (lip of cap rubs on the housing) and went to a local orileys autoparts store for the fuel line. (I believe I used 1 foot of Gates 4219XL 3/16" fuel line) But I would bring the entire tank to the parts store to confirm. The line included with the tank will not work and leaks fuel all over the place.
I also ran an inline fuel filter (not from the tank kit) between the line coming from the tank to the line going to the petcock because the fuel line size is different but will fit on both ends of the fuel filter (that has a step sized male end). Because the tank doesn't have an evap line port, I deleted the entire system and plugged the carb port with a rubber vacuum plug (bought a random assorted box on amazon) The tank itself is vented at the cap. The tank capacity feels like it's between 1/3-1/2 gallon. I was able to travel close to 40 miles on a full tank and the fuel level was pretty close to empty.
Hope this helps.
Thank you for your timely and thorough reply, it is greatly appreciated.
Does it make the bike faster
I guess you didn't watch the video
i wish u make a video of a Yamaha Bw's 1994 50 cc how to fix i have that and i see no video how to fix it hm...
I have some Zuma's that need to get fixed up... will do this summer
Hello where are you from?
Hawaii
@@MitchsScooterStuff wow❤
Perfect...👏🏼👏🏼👏🏼💪🏼
I can drive like 1 to 2 miles and mine dies like it runs outta gas
Nice👊
Thanks Stefan 👊🏼
In the Netherlands IT is illigal tot do so.
Shhh 🤫 Yeah illegal in California.... so I made this routine without cut off or break parts so they can put them back on before go to inspection shop.... I'm in Hawaii that they don't do emission test on scooters so I'm safe :)
I have a 2009 vino 125. Where do I find the engine number. Thanks. Bob
Hi Bob, It’s right by the bottom of rear shock and transmission oil filler cap
Bonjour messieurs moi je habillage de ma moto yamaha forte 125 mais je suis en Côte d'Ivoire
👍👍👍👍👍👍👍
Sorry, I thought this video was for the Zumba.
I heard your moms a zumba 😂
Great video, glad that my Kymco doesn’t have a very complicated emission system. To everybody who wants to have this mod, please mind the legality of this, get in touch with the DOT or whatever to make sure it’s legal in your state, don’t get into trouble. Have a good day.
Thank you! Yup, I forgot to put info in description 😆
@@MitchsScooterStuff I live in California straws and taking off emissions systems is total illegal. But Governor Newscum totally looks the other way when it comes to shooting up heroine in plain sight in public places and deficlating on sidewalks
Lol it’s a scooter no one cares about emissions on it at all 🤙🏼
Good whork 👌👌👌
It says here: ".. Filmed by Mitch Bergsma... " You are only filming if you load a camera with film. If you're not doing that, you are videoing. Remember: video cameras, that includes phones, don't use film, therefore, when you use them you are NOT filming, you are videoing. It's simple: No film, not filiming.
Remember: don't be a dick head.
I can tell you don't have many friends.