Mitsubishi Lancer 2006 Restoration | Part 1
Vložit
- čas přidán 20. 08. 2024
- Mitsubishi Lancer 2006, Automatic 1.5 Japan Import, In for full mechanical and cosmetic restoration. This part covers, denting work, paintwork, engine tuneup, brake work & interior detailing.
Part 2
• Mitsubishi Lancer 2006...
Part 3
• Mitsubishi Lancer 2006...
By
ConditionTech | Automotive Restoration & Reconditioning
Website : www.conditiontech.com
Facebook : / conditiontech
CZcams : / conditiontech
Instagram : / conditiontechmotors
Contact # +923008633364
Multan, Pakistan
#conditiontech #restorationreconditioning
Adnan bhai u r very well trained person . God bless u.
Never seen such detailed work ❤
Thanks!
It's a treat for my eyes to watch a lancer getting the love. I think my lancer also requires some from you guys, might visit soon! Needs suspension work, paint, some dents and the main issue.. RPM drops when AC is on and it's in D mode. Changed throttle body changed Idle Air control valve didnt solve the issue. Can you guess what might be causing this issue? :(
Ac amplifier hota hai blower motor k sath, get that checked if it is present in your car or missing most probably if you bought the car used, some previous AC technician would have removed that part, I have Suzuki baleno and it's a common occurrence in baleno hence I'm guessing the same for lancer
Iac stepper motor ki calibration kren
We have tried to address this RPM drop issue in part - 3 which will be uploaded soon. Get you car engine compression tested if it is low then unfortunately you will have to get its engine overhauled otherwise RPM drop issue in D mode will remain. This is what we learned about it after checking everything.
عدنان بھائی بہت ہی اعلیٰ معیار کا کام کرتے ہیں اللہ تعالیٰ آپ کو مزید کامیابی اور ترقی عطا فرمائے ۔ امین
Jazak Allah Brother, Shukriya!
زبردست عدنان بھائی بہت ہی زبردست اسے کہتے ہیں professional work
Shukriya Bhai!
MashaAllah as a 1st viewer comment .
My favourite vehicle good machine
Jazak Allah, Thanks!
Adnan bhai kia Gari ko deep check krte qasam se love it ❤️
Thanks!
Good work keep it up sweet bro ❤️💯🤲
Thanks 👍
There are two origin of lancers in Pakistan, one is the Thailand one which was imported by Shahnawaz and the other is JDM import, the issue with the break cylinder is that JDM lancer has ABS breaks and the Thailand one doesn't, and the parts available in the Pakistan market (brand new one) are based on the the one imported by Shahnawaz (which was basically officially launched) and the parts available in the used market (kabli parts) are of the JDM one, that is why it has some parts difference,
I hope you get what I'm saying
Agreed 👍🏼
Raat k 1w baaj gye hain Paris me behta aapki vedio Delhi rhapsody hmm or 😮bhi kiya end details krty ho problems ko ,huge respect brooo Allah aapko kush rkhy
Love to see lancer getting the love it deserves. I also have a Lancer and I got it restored in 2018. Made a video of it and uploaded it on my channel. It wasn’t as detailed as this one is. But still I love what you are doing to this one.
Thank you!, just watched your video of lancer, it turned out nice 👌
Buhat acha kaam kartay hain aap or video bhi khoob banatay hain aap bus isi tarhaan banatay rahain good work and God bless you 👍👍👍👍👍👍
Jazak Allah, Thanks!
ماشاء اللہ. بہت عمدہ. ❤
Jazak Allah, Shukriya!
Great sir plz second part jaldi upload krna 🎉🎉
2nd Part uploaded
Nixe work😊
as usual outstanding work , i am from peshawar and i will visit to multan for my car work,
Thanks, Sure In Sha Allah
Bro trust me itna dill laga k kam krty kisi ko nai dekha mje nai pata bhai kaha hein per mei apni civic 2005 ko lazmi apko dena chahta hu usy show room condition kr dye
Waiting for part 2
Just uploaded
I wish u will be in Rawalpindi or Islamabad then I will be your permanent customer. U r doing an awesome job.
waisay ye video daikhty hway me soch raha tha ky is lancer ky owner ka bill kitna bna hoga ;-)
Nearly 3 lac
You guessed it very close, it was 343K total.
Hamesha ki trah 🤗 🤗🤗 superb 👍 👌
Thank you!
@@ConditionTech welcome Dear ❣️
Hats off, the car looks amazing.
Thanks!
Outstanding job!. Welldone.
Thanks
I Appreciate you Sir 👍🏻
Thanks
Amazing work ❤❤❤❤
I've the same Lancer model. But with 1.6 CVT AWD. Comes with rear wiper, and all the goodies. The car is a treat to drive, the road grip is insanely good.
However the vibration issues are very annoying.
I had to replace my spark plugs, coils (YEC YENMA), clean throttle body etc.
Yes the car demands work, but once it's done, this machine is a beast, imagine driving a car from 2006/7 which runs like this.
Mansoor autos has all the parts available, they've an online store.
It's a myth that the parts are not available, truth is our mechanics are just not used to working on a better built machine.
Have been following condition tech for a while, their work is top notch.
Yes parts are hard to come by and are expensive, but you won't have to do it everyday if your mechanic is intelligent.
These machines don't break down that easily.
Also another issue was the correct transmission oil. This car comes with CVT(INVECS II) and ATF,
So you NEED to check which transmission it is. Make sure you've the correct fluid in, otherwise you'll have transmission issues.
AWD? Can i see it please
You are right this car has good drive and road grip but engine management wise it is a bit weak, its ecu is slow and once its engine compression goes low then it gives lots of issues specially the idling issue. I know about mansoor autos, i discovered them while doing this project also purchased some parts from them. they are good people.
This person talks like a robot some times taking pauses 😂
Waiting for the part2
Part 2 uploaded
Good job❤
Thanks
What a job adnan bhai and hatts off to you for the challenges you have faced during the restoration of this car...himmat hai apki...and pls post your videos regularly we are eagerly waiting for your videos
In Sha Allah Bhai, i will try to post as frequent as possible. Thanks for waiting & watching!
Love this car but sourcing parts is like a nightmare plz make video n share ur experience ❤️ how difficult it was
Weldone 😘 Adnan, Mashallah.
You should not be in Pakistan.
Jazak Allah Thanks! yes i am misfit but the only one in Pakistan 🙂
Suzuki Alto 2021 model ha full datl price please or love for kamber larknan❤ like your video 📷
Nice video. I wish that owner should not have the budget constraint so that proper restoration is fully done. Otherwise a fine effort on your part Adnan 👍.
Thanks!
Assalam Walekum Wrwb Sir Adnana... Mere pass bhi Mitsubishi Lancer 2004 Model hey... Aap say bht kuch seekne ko mile ga.... I hope aap meri help karen gey.....
JazakALLAH Khair...
This car engine has issues from factory. It starts eating up oil after 100k along with other problems
Exactly!
I wanted to ask that while filming this there was a car undercover and had massive rims and look pretty which car is that????
That is is a 1998 Toyota Corolla 2.0D it is also getting restored.
Nice 👍.. if possible mention shops or dealers from where parts purchased. If possible as per ur experience which brake pads are best for Honda city 2017 as genuine are too expensive. Secondly mention product or chemical use to remove watermark.
We have mentioned an online store for lancer parts in 3rd part of this series. For brake pads we normally purchase second best brake pads available after genuine ones because genuine ones are too expensive. For watermarks removal we are using "Vanquish" of Tonyin brand
At 53:40 it is not the lancer issue it is parts availability issue.
yes it is parts availability issue but it is effecting lancer so it becomes lancer issue
Adnan bhai is ka bil ktna bna ha or ap ki location kahn ki ha men bhe lansar ko ap k pas le aon
Is kay 3rd part kay comments mein hum nay is ka bill mention kiya hai, check comments of 3rd part. We are in Multan, you can contact us on 03008633364, Thanks
Kaisay kasiay loog gadi rakhty hain!!! Severely neglect d
Aoa
Adnan bhai yaqeen mano chass agai
Shukriya!
Beautiful. Do you have any branch in karachi
Thanks, we are in Multan, no branch in Khi yet.
AOA SIR AGLA PART KAB AYE GA❤❤
Next part just uploaded
Paint job not in Paint booth ????
Yes! we apply full paint in paint booth but these were few pieces and dust was low so we opted to apply in open, it turned out perfect.