You can buy this complete project with all the components already soldered on it along with ESP32 which comes preprogrammed along with it's user guide - techiesms.com/product/all-in-one-home-automation-project/
Hii, There is 1 problem in ur code we can't use Alexa/Google to control fan speed , To solve that, i found u need to replace "level_param." by "speed." And also "custom.param.level" by ESP_RMAKER_PARAM_RANGE in void setup Now u can control speed through alexa.
Hai bro your projects are awesome i followed every esp project by you only I have one doubt my added to Google home all lights are switching on but how to control fan speed by Google assistant
Thank you so much, Iâve used your code and everything worked perfectly, connected google home mini and alexa together! Thereâs one thing that ESP Rainmaker goes offline after 3-4 hours of use, happened twice since yesterday. If you know the cause then it would be awesome âșïž Thank you again
Thank you so much indeed. We always appreciate your great effort. Your content is always superb. We hope to see local network control. Thanks once again.
@@kevalnakar6269 There's function for only wifi in the esp rainmaker docs but I don't know how to implement that yet. I am still making some trial and error maybe I will get it work.
Bhai aapke pas Bahut knowledge hai is field ki aap please ise share kare taki kam se kam jo middle class boys v kuch sikh paye but aap to knowledge bech rahe ho CZcams to paise deti hi hai aapko
Hi. Your projects are brilliant. But I can't understand why one would go around the world to just control a light bulb or a fan. Also, it increases the carbon footprint. Is it not foolish to let Google know which bulb or fan you are switching in your home?
The fun comes in when you integrate all the devices in a room or a full building. Suppose you have home theatre which has floor lights,roof lights,projector,AVR,DVR, subwoofer,AC.... and many more. When you integrate all of the devices, you can just simply say "Alexa welcome" which will turn on all devices rather than turning on every switch. Also while watching a movie if you want to reduce the temperature,you can just say "Alexa temperature 25" ,which helps rather than turning on the light and changing the temperature by pointing the remote to AC. For the security reason they have everything with them, for example the phone we are using đ. To develop a custom app for controlling the device you have to learn many things. Also if you want to share a device the opposite person may not have the app. So using google is an easy way for everyone.
Hii, There is 1 problem in ur code we can't use Alexa/Google to control fan speed , To solve that, i found u need to replace "level_param." by "speed." And also "custom.param.level" by ESP_RMAKER_PARAM_RANGE in void setup Now u can control speed through alexa. By the way thanks for providing video on this topic.
What happens if you turn on light using manual switch, then you switch off using mobile app...and then disconnect wifi...? Does the light turns on again, bcos manual switch is in ON position??
Thank you so much! your all videos are very useful, Pls add timer function with this esp32 rainmaker products(particular time set for ON/Off control the relays)
Please make a video how to save data in EEPROM and make perfect automation project. Because no-one want to switch on after every power failure đđđđ
Great videos series coming now.... Can you dive , just for one video...into the implementation of same project using ESP-IDF (embedded C) ? As for development of marketable products, we can not use Arduino. Also integrate , 2 dimmable light points also.
That's a bit silly having to disconnect the internet in order to use the manual switches, why not use the common on the relay as your switch wire and NC contact for the switch and NO for the ESP?
Bro, I think you didn't get that you can control your devices through your mobile application as well as with manual switches too whether you are connected to your internet or not manual switch still works.
I got your product. But there is a problem with it. You did not give a single hole to screw it to Electrical board. I suggest you to drill 4 hole to corner to the PCB so we can screw it.Thank You
What a brilliant project, but what will be condition of program if power failure occurs ? Will this coding will help in remembering the last status of switches and relays?, if not ,please make one video ,i.e how could it will be possible,and thanks a lot, it is one of the best project
Good evening, could you sell the pcb project for example because I am from Brazil, then I would have it manufactured, project with .ino manual and layout for pcb
Seriously âč3600 for ESP8266 module, Relays and Hi-link, if anyone have little bit knowledge of electronics and Arduino they can build it under âč1500 easily. I built it under âč1000 for 6 channel relays with manual controls also. đ
It's esp 32 and he is not saying go buy it if ur lazy then u should buy else make one ,instead of complaint u should say thnx to him cause he is not like other ytbrs who make short videos and give whtsp no to buy code or project ,but he is giving free to all
@@techiesms Ohh okay. Actually pre-ordering a ready to use PCB or getting it done on a PCB makes learning zero. For electronics enthusiasts you should find out a way where there is still sense of DIY for us. Otherwise its just like watching a movie in a language that we do not understand.
@@off-courseu look new bro chk this channels past and making pcb is always great idea if u have little bit of brain u can see same circuit in his article
Excellent very educational video. Could you please make another one with the thermostat function. With DS18B20 and also with DHT11 I thank you in advance
I have a problem When I'm trying to upload the code to 5he esp32 it says sketch too big how can I solve this? Thank you for the explanation in the video
I was too facing the issue and it came out the board is bad it is switching state automaticallly so i brought new board and it solved problem but now device not found error
hello sir excellent project your explanation very nice.. i have three question please explain me ...1.. esp rainmaker work with esp8266 or not 2...can i use esp32 with sim800l module for internet connectivity and also use sms or call command for relay on off. 3.. and also i want know if wifi is not available. that time esp32 will work with bluetooth and manual or not and if available it will work back with wifi and manual. i want create bluetooth local area connectivity when is not wifi connect or avilable.
Thanks for.....making this manual and internet controlled automation ,last time I ask this...@techiesms team reply me it's done Thank a lot And i have a doubt , it can be controlled from pc through local ip address or login access from internet
Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled. (getting this error in your code ) just used ESP32 without connecting any other hardware
Hi bro good evening can you do me a favour bro I need I have he speak 32 and I need to control some lamps and one fan so with rainmaker app with manually and with ESB 32 can you please send me the program for this one pls bro
Thank u sir.... Any subscription in rainmaker cloud sir.... Pls tell me... How many devices connected sir.. In free..... This dout sir all ur customer and subcribers.....
Very thank you for this video man, but I have a question: I plan to use esp rainmaker for profissional use, so can I change the rainmaker app visual, like putting the company I work logo, theme, etc? Imagine our costumers using the app, not me. By the way, it's possible to change the language too? I didnÂŽt find anything related at the app.
Hi đ Bro can you use rainmaker app to set up sonoff devices Because in the video, on your brother's phone that you shared the project has some sonoff device on it
Great project bro but I have a problem when I upload the code to esp32 it shows the sketch is to big for esp doit dev kit v1 can you please help in that?
Hello, Sir your videos is really informative and everytime I learn sometimes someting new. I would like to request to make a video IOT based project where Through single Mobile Application I can control multiple microcontroller
I think it is useful for physicaly challenged person not for everyone It makes us lasy Personaly I don't like the idea of home automation , Becouse simply physical switches are robust, can't be hacked and does not require internet. But it's good do learn something, we can use the knowledge somewhere else.
![[Tutorial] Getting Started With ESP Rainmaker](http://i.ytimg.com/vi/AQDzyJrRA5M/mqdefault.jpg)
You can buy this complete project with all the components already soldered on it along with ESP32 which comes preprogrammed along with it's user guide - techiesms.com/product/all-in-one-home-automation-project/
Schematic please
@@alexandrefernandes7186 c pl
Hii, There is 1 problem in ur code we can't use Alexa/Google to control fan speed ,
To solve that, i found u need to replace "level_param." by "speed." And also "custom.param.level" by ESP_RMAKER_PARAM_RANGE in void setup
Now u can control speed through alexa.
@@Saifali-tu1ik it's not work
Email me ur code
You are Sonu Sood of iot projectsâ€ïžalways helping othersđ€©
Thank you buddy âđ»
I would just say
Just keep sharing And keep supporting
Yeah you r right đđđ
Hai bro your projects are awesome i followed every esp project by you only
I have one doubt my added to Google home all lights are switching on but how to control fan speed by Google assistant
Best project always, bro please local internet control we need that
Thank you so much, Iâve used your code and everything worked perfectly, connected google home mini and alexa together! Thereâs one thing that ESP Rainmaker goes offline after 3-4 hours of use, happened twice since yesterday. If you know the cause then it would be awesome âșïž Thank you again
Thank you so much indeed. We always appreciate your great effort. Your content is always superb. We hope to see local network control. Thanks once again.
Thank you đ
Do you mean using wifi Direct or hot spot - wifi pair
@@kevalnakar6269 I meant using only wifi without internet.
@@scienceoftheuniverse9155 yes it is possible, you have to make your own app ( mit app inventor )
Videos are there on CZcams for that
@@kevalnakar6269 There's function for only wifi in the esp rainmaker docs but I don't know how to implement that yet. I am still making some trial and error maybe I will get it work.
you are so underrated man , your just awsm , doing best then other country techi
Great đ sir you are working very hard
Thanks for your appreciation
Just keep sharing and keep supporting
It's work on Siri?
And one relay can we can use as a single pulse signal( latching in sonoff)
Bhai aapke pas Bahut knowledge hai is field ki aap please ise share kare taki kam se kam jo middle class boys v kuch sikh paye but aap to knowledge bech rahe ho CZcams to paise deti hi hai aapko
Hi.
Your projects are brilliant. But I can't understand why one would go around the world to just control a light bulb or a fan. Also, it increases the carbon footprint.
Is it not foolish to let Google know which bulb or fan you are switching in your home?
The fun comes in when you integrate all the devices in a room or a full building.
Suppose you have home theatre which has floor lights,roof lights,projector,AVR,DVR, subwoofer,AC.... and many more. When you integrate all of the devices, you can just simply say "Alexa welcome" which will turn on all devices rather than turning on every switch. Also while watching a movie if you want to reduce the temperature,you can just say "Alexa temperature 25" ,which helps rather than turning on the light and changing the temperature by pointing the remote to AC.
For the security reason they have everything with them, for example the phone we are using đ. To develop a custom app for controlling the device you have to learn many things.
Also if you want to share a device the opposite person may not have the app. So using google is an easy way for everyone.
@@noelk6990very right bro
Hii, There is 1 problem in ur code we can't use Alexa/Google to control fan speed ,
To solve that, i found u need to replace "level_param." by "speed." And also "custom.param.level" by ESP_RMAKER_PARAM_RANGE in void setup
Now u can control speed through alexa.
By the way thanks for providing video on this topic.
Educational and nicely explained đđ If possible create few videos on Kincony products like KC868-E16S with rainmaker.... it will be awesome
Good morning, is it same to control custom device slider parameter as of fan device??
Fan device has it's own slider parameter in it but that comes with 0 to 100 range
hence I added a custom parameter in that
What happens if you turn on light using manual switch, then you switch off using mobile app...and then disconnect wifi...? Does the light turns on again, bcos manual switch is in ON position??
It stays as it is
Thanks your sharing!
My pleasure!
Hi,how if i don't want to use manual switch??which code that i should erase?because i want to add some code for control with bluetooth too
Acebutton code
That is responsible for manual switches
why you have connected a 10k ohm resistor to every switch in the circuit
Thank you so much! your all videos are very useful, Pls add timer function with this esp32 rainmaker products(particular time set for ON/Off control the relays)
Please make a video how to save data in EEPROM and make perfect automation project.
Because no-one want to switch on after every power failure đđđđ
Hi sir excellent project
your explanation very nice
I will meet you soon đđ
Always welcome
Very nice explanation
Thanks
Great videos series coming now....
Can you dive , just for one video...into the implementation of same project using ESP-IDF (embedded C) ?
As for development of marketable products, we can not use Arduino.
Also integrate , 2 dimmable light points also.
Sure...
can you tell me about marketable products & why we cant use arduino?
Amazing thanks for making sir đ
Keep sharing, keep supporting
That's a bit silly having to disconnect the internet in order to use the manual switches, why not use the common on the relay as your switch wire and NC contact for the switch and NO for the ESP?
Bro, I think you didn't get that you can control your devices through your mobile application as well as with manual switches too whether you are connected to your internet or not manual switch still works.
@@surajmehta6568 Well not really how he's explained the code. Which I might add isn't on his website.
If you want that way, the system will not know whether the device is on or off.
In that way if you turn on the device manually then you cant turn off it by app
I got your product. But there is a problem with it. You did not give a single hole to screw it to Electrical board. I suggest you to drill 4 hole to corner to the PCB so we can screw it.Thank You
Thank you so much for your suggestions
We will definitely include this in our next version
It's already rainmaker project available in CZcams with 8 channel
Does it have fan speed control as well?
@@techiesms only thing missing
Well if do complete home automation with different sensor I can buy complete project
Sir Make next Video on, Build Your Own Google Home + Alexa Smart Speaker
What a brilliant project, but what will be condition of program if power failure occurs ? Will this coding will help in remembering the last status of switches and relays?, if not ,please make one video ,i.e how could it will be possible,and thanks a lot, it is one of the best project
Hello, I don't have the status in ESP Rain Maker when I turn it on and off by manual switch.
Good evening, could you sell the pcb project for example because I am from Brazil, then I would have it manufactured, project with .ino manual and layout for pcb
Contact me
coding ,connection diagram part is not found in the above mentioned link. please update it.
Does it work with Home Assistant?
working on it
Seriously âč3600 for ESP8266 module, Relays and Hi-link, if anyone have little bit knowledge of electronics and Arduino they can build it under âč1500 easily. I built it under âč1000 for 6 channel relays with manual controls also. đ
Well
Itâs your choice
I have provided circuit diagram, code everything for free
So if you want make it as well.
It's esp 32 and he is not saying go buy it if ur lazy then u should buy else make one ,instead of complaint u should say thnx to him cause he is not like other ytbrs who make short videos and give whtsp no to buy code or project ,but he is giving free to all
Really great, one question, would you go for at least a short video on how to implement BACnet protocol into the ESP32? Thanks
Why to use PCB, if you really want people to learn then please do it on bread board so that people can easily do it
It have a lot of connections and doing it on breadboard will be very confusing and hectic to debug
@@techiesms Ohh okay. Actually pre-ordering a ready to use PCB or getting it done on a PCB makes learning zero. For electronics enthusiasts you should find out a way where there is still sense of DIY for us. Otherwise its just like watching a movie in a language that we do not understand.
@@off-courseu look new bro chk this channels past and making pcb is always great idea if u have little bit of brain u can see same circuit in his article
Awesome Bro
Code and diagram article link not working
I'm not able to control the speed of the fan through alexa app.. Any solution for that ??
Alexa says "the fan doesn't support that"
Bro I'm getting error text section exceeds available space in bordsketch uses 1802493bytes(137%) of program storage space.
Now If you use SSR instead of Realy That could be awesome
Will work on it
Could you please help me to stay in the last state when power resumes after power failure in the ESPRainmaker sketch?
Can u add touch switches for this project..??
clear video sir.
QR code scan not smoot sir.
What's wrong with scanning QR code?
@@techiesms error while Confirming wifi connection And can not use ios devices. Thank sir
Excellent very educational video.
Could you please make another one with the thermostat function.
With DS18B20 and also with DHT11
I thank you in advance
Gr8 Project bro, does it retain the status of the relay if power goes off to the board and back ON?
It doesnât
But you can add program for that easily
@@techiesms thanks bro, will order one PCB, any combo offers is we order multiple PCBs together? đ
We are not selling PCBs
We are selling the complete project
@@techiesms My Bad, any combo offers if we buy multiple projects?
@@techiesms Make A Video On How To save Data Or how To use Eeprom Please
I have a problem
When I'm trying to upload the code to 5he esp32 it says sketch too big how can I solve this?
Thank you for the explanation in the video
hey can you provide a gerber file for this project. im a guy with cs background and now learning electronics.
We can't find any code on ur description sachin ji. Please provide.
create example tutorial with esp rainmaker javascript based rest api and user management
Bro fan speed control using alexa and Google not working tell me why solve this ,those app nor showing speed slider options
Bro fan speed control using alexa and Google not working tell me why solve this
I am getting some error after running the project. Switch2 blinks every after 1 seconds. Can you fix this ?
May be there is some problem with your connections. Otherwise the code is tested and we didn't find any such error
I was too facing the issue and it came out the board is bad it is switching state automaticallly so i brought new board and it solved problem but now device not found error
Good morning
Morning
hello sir excellent project
your explanation very nice.. i have three question please explain me ...1.. esp rainmaker work with esp8266 or not
2...can i use esp32 with sim800l module for internet connectivity and also use sms or call command for relay on off.
3.. and also i want know if wifi is not available. that time esp32 will work with bluetooth and manual or not and if available it will work back with wifi and manual.
i want create bluetooth local area connectivity when is not wifi connect or avilable.
You are the best, please can you make it to also work with Bluetooth
Hello
I have facing issue of error to upload the code into my esp32
what's the error?
@@techiesms error is "sketch is too big for DOIT ESP32 DEVKIT V1"
Select ESP32 dev module and select partition schemes as RainMaker
how to create push button like door bell sir? thank you
bro plz proved GERBER AND BOM CPL FILES so can also try this
I want to buy this project only coded ESP 32 module...
Please reply đđ
Iâm from Bangladesh .. I want to know details on node red.. how is it possible? what can i do for watching your private video on node red
Thank you for sharing. Do you also deliver it abroad. Furthermore, I really like your square cealing light, do you have an what are they called?
btw can i connect the device with home assistant instead of rain maker app?
Is it possible to use 16 channel relay with this I have a room with a lot of lights and I need at least 16 channels to control all of them
we will try to make that as well in future
Thanks for.....making this manual and internet controlled automation ,last time I ask this...@techiesms team reply me it's done
Thank a lot
And i have a doubt , it can be controlled from pc through local ip address or login access from internet
Hi, can u replace the switches with touch sensor??
Hi Dude , Good Work ,
but Can you please share Gerber & schematics file with us?
Sorry
As we are selling this complete project, we canât share
Hi, please can you show as where to write the local internet control code
Switch State does not resume when there is power failure is there any way to do that also?
This one has that feature - czcams.com/video/87QhjQth-pQ/video.html
đ For your effort
Thanks for liking
Will esp rainmaker work with nodemcu?
Great job đđđ
Very very interesting project đđđ
Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.
(getting this error in your code ) just used ESP32 without connecting any other hardware
Mostly the reason may be of library and boards package version
If thatâs not the case
Try changing the ESP32 board and test
When the Electricity cutt off can it save the previous state ? like eeprom memory ?
No
but you can add that program in the code
Hi bro good evening can you do me a favour bro I need I have he speak 32 and I need to control some lamps and one fan so with rainmaker app with manually and with ESB 32 can you please send me the program for this one pls bro
Is it posible to connect multiple esp32 in 1 dashboard? Like the one we can do with blynk iot. Thanks in advance.
You can see all the buttons on the same dashboard but you have to create different nodes for each ESP32
Awesome Brother
Thank u sir.... Any subscription in rainmaker cloud sir.... Pls tell me... How many devices connected sir.. In free..... This dout sir all ur customer and subcribers.....
5 nodes for free in ESP32
&
20 nodes for free in ESP32-C3 and S3
And each nodes can have variable devices based upon the memory occupied by the code
How to add fire sensor with buzzer alarm
Hi bro can use add this on touch function??
is it possible to run rain maker in esp8266 board
Very thank you for this video man, but I have a question: I plan to use esp rainmaker for profissional use, so can I change the rainmaker app visual, like putting the company I work logo, theme, etc? Imagine our costumers using the app, not me. By the way, it's possible to change the language too? I didnÂŽt find anything related at the app.
Customers can reach out to sales@espressif.com to get quotation. Pricing is different for different devices and models.
Can we add aleart notification to our mobile app using arduino code with esp rainmaker
Need to check that
not really sure
Hi đ Bro can you use rainmaker app to set up sonoff devices
Because in the video, on your brother's phone that you shared the project has some sonoff device on it
It was just the name of the device
not the actual sonoff
Wow đ
A like this video...i need code this video..
Great project bro but I have a problem when I upload the code to esp32 it shows the sketch is to big for esp doit dev kit v1 can you please help in that?
You have to select ESP32 dev module in the boards and in the partition scheme select RainMaker and then upload the code
Bro what about controlling fan speed using Google assistant and Alexa that one part is missing can you please explain that too
Just say
âAlexa, set fans speed 3 â
đđ ok bro thanks
For fan speed control using alexa it is not working
brother where can i buy home automation circuit
Dear sir, I am getting an error "error in changing user role "during add device through barcode scanner please help
Fan humming karega kaya ismain ...ab tak jitne bhi circuit aye hain dimmer ke sab main ac motor humming sound karti hai...plz explain sir
Bilkul bhi nai
Hello, Sir your videos is really informative and everytime I learn sometimes someting new.
I would like to request to make a video IOT based project where
Through single Mobile Application I can control multiple microcontroller
While I am upload code it's shows RMaker is not file dictionary
Have you installed ESP32 2nd version of boards packages?
Can we do this on ESP8266 board ? Also can you explain how to make energy meter using bl0937 ic ?
no you cannot use esp8266 for rainmaker
Sir please make video on requirements to entering into iot feild
I made a video talking about skills that Iot companies are looking for, kindly watch that out
please make with eeprom then it will perfect
Hey bro can you make Electronics course?
I think it is useful for physicaly challenged person not for everyone
It makes us lasy
Personaly I don't like the idea of home automation ,
Becouse simply physical switches are robust, can't be hacked and does not require internet.
But it's good do learn something, we can use the knowledge somewhere else.
Can I use esp 8266
Sir plz can you share the Gerber file of your pcb